Author Topic: rad in the front  (Read 4298 times)

0 Members and 1 Guest are viewing this topic.

maxlee

  • Super Member
  • ***
  • Posts: 195
  • Karma: 0
    • http://www.trampdrift.com
rad in the front
« on: July 07, 2005, 06:31:11 PM »
do you think the walter pump would be able to push the walter round?
was thinking of useing onther biss rad or a bike rad (small sized) putting it in on the return pipe from the heater rad (cant spell maytrix) that way i can use the valve just be for the heater rad to trun off the flow. also have a fan on it on a switch

what do you guys think???????
TrampDrift its for winners

Chris Lakin

  • Super Member
  • ***
  • Posts: 2105
  • Karma: 0
    • http://www.fiat126.co.uk
rad in the front
« Reply #1 on: July 07, 2005, 07:19:54 PM »
sounds a good idea Maxlee, complex though, but if you have the skills it would be great. certainly sprt out the over heating problem where the rad is concerned. What about a rad from a mini? saw one on ebay other day.

do you think the bis would look good with a grill at the front??

regards

Chris
+ SKYPE USERNAME: fiat126.co.uk
+ CLUB (ENQUIRIES): [email protected]

maxlee

  • Super Member
  • ***
  • Posts: 195
  • Karma: 0
    • http://www.trampdrift.com
rad in the front
« Reply #2 on: July 07, 2005, 08:49:35 PM »

mini rad wouldn't be to good as the size is to high and not wide anuff want some thing like

i have a metro rad and twin fans i will see how it fits 2moz
(going were the spair wheel would go) need to work out if the pump would pump the walter to it from the back  :roll:  not sure how,

the other thing is my one is pretty mint i dont no to mod it or clean it up take it to shows and just  sell my jeep and by onther one
TrampDrift its for winners

slater

  • Super Member
  • ***
  • Posts: 215
  • Karma: 0
    • http://www.retro-rides.com
rad in the front
« Reply #3 on: July 07, 2005, 09:17:26 PM »
Pump should be ok, its only a few more feet of extra tube, hardly any flow resistance at all compared with a radiator :D

maxlee

  • Super Member
  • ***
  • Posts: 195
  • Karma: 0
    • http://www.trampdrift.com
rad in the front
« Reply #4 on: July 07, 2005, 09:28:31 PM »
:D anser i was looking for

will have a play 2moz and let you no the feed back on if a metro rad fits or a fista one as i have one of them some were to  :roll:

im still thinking of kepping the one in the back as well
TrampDrift its for winners

ChrisRLewis

  • Administrator
  • Super Member
  • *****
  • Posts: 1723
  • Karma: 25
    • Club126uk
  • Location: Swansea, UK
rad in the front
« Reply #5 on: July 08, 2005, 05:50:26 PM »
Do Bis engines run hot :oops: ?
I have another post regarding to the dreaded bis engine problem!
According to feedback, they seem to run at the correct temperature, so is there any benefit to fitting a rad in the front?

Chris Lakin

  • Super Member
  • ***
  • Posts: 2105
  • Karma: 0
    • http://www.fiat126.co.uk
rad in the front
« Reply #6 on: July 08, 2005, 06:48:41 PM »
i dont think they run hot, i think it takes a long while for the coolent to kick in, but once it does it works fine??

i dont think relocating the rad, will do much. If you keep your collent topped up and check thermostat oftenfor a blockage should be fine??? shouldnt it?

chris
+ SKYPE USERNAME: fiat126.co.uk
+ CLUB (ENQUIRIES): [email protected]

maxlee

  • Super Member
  • ***
  • Posts: 195
  • Karma: 0
    • http://www.trampdrift.com
rad in the front
« Reply #7 on: July 08, 2005, 10:34:39 PM »
didnt get a chance to day to playu as i got side tracked :(

did how ever fit a massif air filter (induckshion kit) on the 1.9D bx  :lol:  had to be done has a raaaa to the bus sound now  :shock:

if the heads warp and the head gasgits are none for going then its a sign it runs hot
much rather keep it cool :D then it hot

but i could be rong  :oops:
TrampDrift its for winners