Author Topic: Info needed on early AC 126 shiny bits  (Read 4755 times)

0 Members and 1 Guest are viewing this topic.

punkydog

  • Member
  • *
  • Posts: 66
  • Karma: 0
Info needed on early AC 126 shiny bits
« on: February 13, 2007, 06:40:17 PM »
Can a proud owner of a early 126 tell me if the wiper arms are stainless ( i.e silver)? Ditto on the escutcheons (love that word) and hold down nut.

 Next, does the front number plate attach with some type brackets to the two holes in the bottom of the bumper?

And, is the windscreen rubber a factory sealed in type or does it have a locking strip?

Lastly, is the widow chanel upright betwwen the quarter light and main drop down widow stainless/ chrome?
Brian

bis13

  • Super Member
  • ***
  • Posts: 2749
  • Karma: 39
Info needed on early AC 126 shiny bits
« Reply #1 on: February 13, 2007, 06:45:22 PM »
have a browse on the axle gerst website and you might find some answers

126dave

  • Super Member
  • ***
  • Posts: 1534
  • Karma: 2
Info needed on early AC 126 shiny bits
« Reply #2 on: February 13, 2007, 06:52:48 PM »
the wiper bits are stainless,the glass rubber had a ''flash'' plated ''chrome'' strip locking strip (i have the tool here to fit if you need to borrow)

the other ''chrome'' bits are polished alloy..no early 126's ive seen had any chrome (apart from bumpers?).........but feel free to shoot me down in flames........... :lol:.....its been a while since i seen one..........
28-34c and cold beers in the fridge

Dom

  • Super Member
  • ***
  • Posts: 473
  • Karma: 2
    • http://www.cardomain.com/ride/2915992
Info needed on early AC 126 shiny bits
« Reply #3 on: February 13, 2007, 07:04:03 PM »
I have one sitting outside.

Wipers are stainless, as are the escutcheons (though chrome of the plastic variety), and the nut.

Number plate attatches to chrome bumper as you say, with two mini brackets.

My windscreen rubber has the chrome locking strip, not sure if this is how it came, or due to it being replaced somewhere along the line.

The widow chanel upright betwwen the quarter light and main drop down is not chrome, though the rim surround of the entire fron window is.

Hope this helps

punkydog

  • Member
  • *
  • Posts: 66
  • Karma: 0
Info needed on early AC 126 shiny bits
« Reply #4 on: February 13, 2007, 07:35:45 PM »
Had a shufty at axle gerst before posting - doesn't say for 126 wiper arms and blades, Tex make SS ones them but they would be cheaper from Axle so enquiries will be made.
The window upright seems to be silver in some pics and matte black in others.Thanks everyone for looking
Brian

126dave

  • Super Member
  • ***
  • Posts: 1534
  • Karma: 2
Info needed on early AC 126 shiny bits
« Reply #5 on: February 13, 2007, 07:42:22 PM »
sorry off topic but........heres a tip about gerstl,email first before ordering (if you do) to check availibility...the site is great but...if its not late production polish,or if its tuning stuff,they tend to have to back order it.........worse case is they send what they have then hit you agin for postage on your back order.....................

id like to find a dealer thats a cross between nanni and gerstl.....................is there one??
28-34c and cold beers in the fridge

Dom

  • Super Member
  • ***
  • Posts: 473
  • Karma: 2
    • http://www.cardomain.com/ride/2915992
Info needed on early AC 126 shiny bits
« Reply #6 on: February 13, 2007, 08:11:28 PM »
Come to mention it, I've recently started using http://www.fiat500ricambi.nl/en/index.html?lmd=39088.452419

It is 500 based, but many parts, mechanical anyway, are transferable. As a rule, it is a little cheaper than Gerstl, and definitely a lot better communication than Gerstl. And better still, there are many diffferent ways to pay, including paypal.

Not bad, me thinks.

126dave

  • Super Member
  • ***
  • Posts: 1534
  • Karma: 2
Info needed on early AC 126 shiny bits
« Reply #7 on: February 13, 2007, 08:44:45 PM »
just had a quick shuffty......looks good,i'll def try them next time.

thanks Dom
28-34c and cold beers in the fridge

Tomasz

  • Super Member
  • ***
  • Posts: 424
  • Karma: 3
  • Location: Corsham, Wiltshire
Info needed on early AC 126 shiny bits
« Reply #8 on: February 13, 2007, 09:25:54 PM »
I have chrome wiper blades but i found them on ebay and i dont recall seeing any since im afraid.

ciaoflyer

  • Super Member
  • ***
  • Posts: 1325
  • Karma: 3
Info needed on early AC 126 shiny bits
« Reply #9 on: February 13, 2007, 11:31:35 PM »
Hi

I have some of the brackets for the number plate it you would like to see a pic of them, unfortunaley they are not for sale but you may be able to make something up from the pics, let me know if you want a pic!
Ciao4Now

bis13

  • Super Member
  • ***
  • Posts: 2749
  • Karma: 39
Info needed on early AC 126 shiny bits
« Reply #10 on: February 14, 2007, 07:47:56 AM »
you can buy stainless wiper blade (holders) . have a look in practical classics there is usually an ad for them in there.

punkydog

  • Member
  • *
  • Posts: 66
  • Karma: 0
Info needed on early AC 126 shiny bits
« Reply #11 on: February 16, 2007, 06:34:55 PM »
Thanks all, Tex do a wiper n blade for them, apparently the SS original type are no longer available. I just needed to check the front number plate position, there are holes in (what I assumed to be) the bottom of the front bumper, but on few pics the number plate appeared to be fastened straight thru the bumper.
Brian

bis13

  • Super Member
  • ***
  • Posts: 2749
  • Karma: 39
Info needed on early AC 126 shiny bits
« Reply #12 on: February 16, 2007, 06:44:08 PM »
have a look on either the nanni site or 500 mania they do do these wipers and arms in stainless still.

punkydog

  • Member
  • *
  • Posts: 66
  • Karma: 0
Info needed on early AC 126 shiny bits
« Reply #13 on: February 17, 2007, 07:03:43 AM »
I am not sure that the 500 s/s wiper arm is the same as the 126, the 500, 600 and 126(1) all have different codes.The 500 arm looks like it is cranked and bent towards the screen.
I need a rear arm to so Tex it is they have that locking wedge thing so no need for araldite.
Brian

Pete126

  • Administrator
  • Super Member
  • *****
  • Posts: 3369
  • Karma: 35
  • Location: West Yorkshire
Info needed on early AC 126 shiny bits
« Reply #14 on: February 17, 2007, 08:30:33 PM »
can't you use nitromos to remove the powder paint coating, polish them up and clear laquer the arms
Pete.      il cavallo piccolo