hi dom,these are different calipers to mine,mine are ford items,and the normal 126 flexis fitted fine,did your kit not come with bleed /banjo connections??.
the 126 hubs seem to come in slightly diff sizes,thats why you had to grind yours a little,make sure the disc fits flat to the hub surface before tightning the wheels up,the discs WILL destort if not,i gave my hubs a slight chamfer then lapped them to the discs with some coarse grinding paste.my kit had already been botched,(hubs butchered) and i had to re seat the replacement discs on my slightly gound down original hubs,also,the new back plates touched the gaiters on the track rod ends,check yours are ok,i had to grind a small amount of steel away for clearence.....OH,and check the caliper fixing bolts are not too long,mine were,and were going to gouge big troughs in the new discs................................................. :evil: