Author Topic: Stuff i need (Read 3599 times)

slater · « **on:** July 18, 2006, 09:10:46 PM »

In need of alot of parts for my project so i may aswell ask

Im after

Any engine's/gearbox's/part's (aircooled engine's please)
Suspension parts
Any panels (expecially 2 good doors)
All lights so long as they are usable
Any tuning parts
Fiat wheels (old skool 500/126 PCD and newer 4x98mms)
Old Fiat 126s to salvage in the east anglian area

Finding it hard to come by 2nd hand parts in general so come on you guys must have some suff forsale?

?? :roll:

neil 126 · « **Reply #1 on:** July 18, 2006, 10:18:19 PM »

i think i have a set of rear shocks or the old 126.
they are monroes and they are new but lack the rubber mounts.
let me chek my garage, they might be at mums in north scotland.

Chris Lakin · « **Reply #2 on:** July 18, 2006, 10:31:07 PM »

come on people lets see what we can dig out for slater.

Does anyone know if you can use the later doors for older earlier aircooled models, i.e. peel off the paint on the aluminum window surrounds? then polish them up?

regards

Chris

slater · « **Reply #3 on:** July 19, 2006, 07:42:58 PM »

My old earlyish aircooled had a later model door fitted to it. Not sure if they had swapped the trim over but i dont think they had.

126dave · « **Reply #4 on:** July 20, 2006, 09:06:35 AM »

i have BIS doors and bonnet fitted to my aircooled,as far as i know,just the wings differ?

(from a recent post cannot remember who tho)

Chris Lakin · « **Reply #5 on:** July 20, 2006, 09:53:34 AM »

yer the doors fit straight on from any model i believe, but what i mean is, you know on the bis and late fsm aircooled models, you have some paint (usualy peeling off) around the aluminium window surrounds. I was just wondering if the paint could be chipped off and the aluminium polished up to look like the early doors.

regards

Chris

neil 126 · « **Reply #6 on:** July 21, 2006, 10:58:09 PM »

yes i have them in my garage rear monroe shocks, only one has the rubber mounts, perhaps you could reuse old rubber mounts for the other.
do you want them ?
chears neil

slater · « **Reply #7 on:** July 22, 2006, 10:40:19 AM »

How much?

neil 126 · « **Reply #8 on:** July 22, 2006, 10:51:10 PM »

how does a tenner sound, or if you have one lying arround, i could use an cd radio for the car, old and used i dont mind so long as it works.
where abouts in suffolk are you?
i will be working in Bradwell in Essex on tuesday 25th if that helps only for a couple hours though,
here's my number 07834638194 call me if thats easier.
chears neil