Wonky Wheels

[DannyPancho]

I noticed this a little while ago but for some reason never decided to sort it out, when the OSF wheel is pointing straight, the NSF wheel is not, it has a slight turn on it.

When the NSF is straight, the OSF has a little turn to it...

any ideas what this could be?

bad alignment, bent tie rods...??

any help is greatly appreciated!
cheers, Dan

[Gadge]

You need your tracking realigning. A quick trip to your local tyre factors will sort that out for you

[DannyPancho]

Ah thankyou thats definitely the better outcome of the two 

I have another issue also;
One wheel arch has a smaller diameter to the other and it is causing the outer edge of the tyre to rub on it, what could i do about this??

Thanks again 
Dan

[Club1n]

You could roll the arch which flattens the inside lip on the arch up giving a bit more clearance, there's plenty of tutorials on YT

What size tyres are you running? They might be either to tall, or too wide  

[DannyPancho]

Yeah i was thinking that might be an option would rolling change the external look of the arch?

I have 165/55r13's, funniky enough its only one wheel runbing so i know its not the tyres 

The arch itself does kinda look like its been filled in an attempt to make it the same as the other side, maybe grind it back and see whats underneath 

[Club1n]

If you lightly roll it, it shouldn't change the outer look of the arch- it'll just flatten out the lip, it's probably full of filler though so I'd try knocking on the wings/doors etc and seeing if they sound the same before you start rolling etc

[DannyPancho]

I have followed your advice and its worked for me thanks! I now have about 7mm gap between tyre and arch... enough to get it to a garage anyway