Author Topic: Kingpins  (Read 7203 times)

0 Members and 1 Guest are viewing this topic.

fiatfsm

  • Super Member
  • ***
  • Posts: 675
  • Karma: 2
Kingpins
« on: June 29, 2006, 10:11:15 PM »
The kingpins need doing on my car, one hasnt been done since new the other around 3 years ago and that was a horrid job. So, thinking of getting an exchange stub axle set, however have heard stories about really poor quality of these. So does anyone have a good place to get decent ones that will last please?
1987 Fiat 126 FSM, alloys, clear lights, Polish tat accessories... love it!

Nurudin

  • Member
  • *
  • Posts: 32
  • Karma: 0
Kingpins
« Reply #1 on: June 29, 2006, 10:19:32 PM »
Im in the process of doing mine. Got the of the Axel Gerstl and I looks like i will need new rubber bushes now wich I dont have. Keep that in mind.

Vin

  • Member
  • *
  • Posts: 25
  • Karma: 0
Kingpins
« Reply #2 on: July 04, 2006, 12:40:13 PM »
Barry,

I put exchange stub axles on when I did my resto as the originals were knackered.

I got them from Ricambio. They sent them out, then I returned the old ones once I'd swapped them over, and then was refunded. All fairly straightforward.

But - When it came to MOT time after restoration, it passed on everything except for slack in the right kingpin. Well pissed off. Initial phonecall with the older fella there was not too good as he got defensive and insisted it was impossible and I was wrong...... :sad:

So sent it back with a very polite letter, and a copy of my receipt and photocopy of the failsheet, and one of the younger lads there sent me a replacement, return post no problem, and it was back for an MOT pass by the end of the week. :D  :D

As the stub axles have only been on the car less than 12 months and is only used during the summer, I can't comment as to how long they last, but I can say it is far easier swapping over the stub assemblies with replacements.

Vin
1978 900T Citivan, 1986 126 FSM, 1985 Panda 45CL, 1988 Panda 1000CL, 1991 Panda 750L, 2000 Brava SX 105 JTD

ChrisRLewis

  • Administrator
  • Super Member
  • *****
  • Posts: 1723
  • Karma: 25
    • Club126uk
  • Location: Swansea, UK
Kingpins
« Reply #3 on: July 04, 2006, 01:14:00 PM »
I think the problem is something to do with the bushes that they now use? The old type bushes were phosphor bronze and the latest ones are nylon. It's worth checking with the stub axle supplier on what type bushes they use?

fiatfsm

  • Super Member
  • ***
  • Posts: 675
  • Karma: 2
Kingpins
« Reply #4 on: July 05, 2006, 01:29:02 PM »
the last ones I had were nylon, lasted no time at all.... usual Italian quality eh!
1987 Fiat 126 FSM, alloys, clear lights, Polish tat accessories... love it!

Bruce

  • Super Member
  • ***
  • Posts: 338
  • Karma: 0
Kingpins
« Reply #5 on: July 05, 2006, 06:07:24 PM »
I seem to rember nylon bearing being used on some of my old bikes, can't remember what they where for, but one thing i do remember; you mustn't grease them like "proper" bushes, nylon is in effect self lubricating, and the grease damages the nylon.

One thing that is important aswell is the MOT tester must be familiar with old technology.

tomcat

  • Newbie
  • *
  • Posts: 14
  • Karma: 0
Kingpins
« Reply #6 on: July 07, 2006, 04:32:54 PM »
I just bought some exchange stub axles from Ricambio with the nylon bushes and Phil the owner told me that only one company refurbes the stub axles now days so all he can get are the nylon type.

He advised me to grease them every 3 months

fiatfsm

  • Super Member
  • ***
  • Posts: 675
  • Karma: 2
Kingpins
« Reply #7 on: July 08, 2006, 11:49:25 AM »
oh dear, that sounds bad news.
1987 Fiat 126 FSM, alloys, clear lights, Polish tat accessories... love it!

dajwid

  • Subscribers
  • Super Member
  • ****
  • Posts: 2932
  • Karma: 14
Kingpins
« Reply #8 on: July 08, 2006, 09:18:25 PM »
Plenty of companies do recons. New ones off the shelf are about 12-15 pounds each.

Recon are about half that price.

Bruce

  • Super Member
  • ***
  • Posts: 338
  • Karma: 0
Kingpins
« Reply #9 on: July 08, 2006, 09:26:33 PM »
I've done them myself in the past, but the last one i had done a few years ago was done by my local independant Fiat specialist. Not sure if you can even buy the parts any more but then an old type engineering shop should be able to make the parts.

ChrisRLewis

  • Administrator
  • Super Member
  • *****
  • Posts: 1723
  • Karma: 25
    • Club126uk
  • Location: Swansea, UK
Kingpins
« Reply #10 on: July 08, 2006, 10:02:15 PM »
Axel Gerstl lists King Pin kits with the bronze bushes!

Chris Lakin

  • Super Member
  • ***
  • Posts: 2105
  • Karma: 0
    • http://www.fiat126.co.uk
Kingpins
« Reply #11 on: July 09, 2006, 12:13:34 AM »
if these are dgetting scarce might be worth getting a few bought up between us? I cant see them getting rare as long as 500's are about these will be too.

Chris
+ SKYPE USERNAME: fiat126.co.uk
+ CLUB (ENQUIRIES): [email protected]

dajwid

  • Subscribers
  • Super Member
  • ****
  • Posts: 2932
  • Karma: 14
Kingpins
« Reply #12 on: July 10, 2006, 06:00:03 PM »
Checked today. Price for the kit in Poland is 11 Zloty for 1 side. about one pound eighty.

slater

  • Super Member
  • ***
  • Posts: 215
  • Karma: 0
    • http://www.retro-rides.com
Kingpins
« Reply #13 on: July 10, 2006, 09:29:36 PM »
lmao you should send a few sets over and make a healthy profit! :cool:

Bruce

  • Super Member
  • ***
  • Posts: 338
  • Karma: 0
Kingpins
« Reply #14 on: July 12, 2006, 01:36:25 AM »
I remeber what the problem was with nylon now, it was the bowden cables, Jpa bikes used to have a nylon covering on the cables (they may still have them but the last bike i had was years ago) and if you oiled it is messed the cables up.