Author Topic: where's a good place to get parts ? gasket sets, hoses etc.  (Read 3373 times)

0 Members and 1 Guest are viewing this topic.

issylupus

  • Member
  • *
  • Posts: 51
  • Karma: 0
:roll:

Hello every one.

I was wondering if any of you lot can put me onto somewhere where I can get gasket sets and other bits and bobs for my "£100. 126 aircooled"

I googled "fiat 126 gaskets" but all the results did'nt seem relevant !!!!

My mate, Shaun, is going to compleatly strip, wash and rebuild the engine for me and said I should get a full replacement kit for the gaskets etc. I'm not too sure what all I need and dont know where to start looking !!!

So thats why I posted this, as YOU LOT are bound to know.

Its a D reg air cooled Brown. 652 cc.

thanks folks.

Issy :lol:
0 - 60 ---- Honestly !!

Chris Lakin

  • Super Member
  • ***
  • Posts: 2105
  • Karma: 0
    • http://www.fiat126.co.uk
where's a good place to get parts ? gasket sets, hoses etc.
« Reply #1 on: June 26, 2006, 10:02:38 PM »
hi Issy, ricambio is the best option they have alot of parts, www.ricambio.co.uk they also give club members 10% which always helps, especialy when you order lots of parts and becomes expensive.

alternatively you can buy from abroad, www.500126.com quote a bit che.aper but takes a while to arrive and often out of stock anyway.

regards

Chris
+ SKYPE USERNAME: fiat126.co.uk
+ CLUB (ENQUIRIES): [email protected]

issylupus

  • Member
  • *
  • Posts: 51
  • Karma: 0
where's a good place to get parts ? gasket sets, hoses etc.
« Reply #2 on: June 26, 2006, 10:54:14 PM »
thanks Chris,

I have sent both places an email of what I need so will wait and see now !!

RGDS

Issy :lol:
0 - 60 ---- Honestly !!

PaulB

  • Super Member
  • ***
  • Posts: 333
  • Karma: 0
where's a good place to get parts ? gasket sets, hoses etc.
« Reply #3 on: June 27, 2006, 09:08:28 AM »
Try axel gerstl in Germany - cheap and quick and the website is ace. Postage starts at 8 euro - so order as much as you need at once. Prices are way below anything in the UK. If you use them, the only quirk is how you enter your postcode - leave out the space or it gets rejected!

https://ssl.kundenserver.de/shop.fiat500126.de/indexa.htm

slater

  • Super Member
  • ***
  • Posts: 215
  • Karma: 0
    • http://www.retro-rides.com
where's a good place to get parts ? gasket sets, hoses etc.
« Reply #4 on: June 27, 2006, 07:29:40 PM »
When i checked about a year ago pretty much all 126 parts were still avalible through the usal aftermarket parts supplyers meaning that you should be able to walk into your nearest motor factors and have them order the parts for you. In reality i suspect it wouldent be quite that simple but parts are still listed in the up to date catalogues so in theroy you should be able to get them.

Chris Lakin

  • Super Member
  • ***
  • Posts: 2105
  • Karma: 0
    • http://www.fiat126.co.uk
where's a good place to get parts ? gasket sets, hoses etc.
« Reply #5 on: June 27, 2006, 08:23:21 PM »
yer i think you are right slater, but you know what some businesses are like, and even worse the fiat dealers! Mick (bis13) was telling me the other day the bloke at the counter of the fiat dealership was "not familiar with that model (fiat126)" its worrying!!!

i have got a parts, catalogue a member sent me its on cd and its 500mb i would putn it online for download but its too big, it covers every single bis part and you can look up a diagram of the part and part number whgich in theory should make it easier for ordering bits.

I will see if i can get this uploaded somehow,somewhere.

regards

Chris
+ SKYPE USERNAME: fiat126.co.uk
+ CLUB (ENQUIRIES): [email protected]

126dave

  • Super Member
  • ***
  • Posts: 1534
  • Karma: 2
where's a good place to get parts ? gasket sets, hoses etc.
« Reply #6 on: June 27, 2006, 08:32:14 PM »
for standerd parts gerstl are the ones to use,fab site and fab postage times
28-34c and cold beers in the fridge

Chris Lakin

  • Super Member
  • ***
  • Posts: 2105
  • Karma: 0
    • http://www.fiat126.co.uk
where's a good place to get parts ? gasket sets, hoses etc.
« Reply #7 on: June 27, 2006, 08:37:21 PM »
i think we should have a recomended companies section on the forum?

Only problem is you get alot of disgrunted buyers slating sometimes innocent companies.

regards

Chris
+ SKYPE USERNAME: fiat126.co.uk
+ CLUB (ENQUIRIES): [email protected]

issylupus

  • Member
  • *
  • Posts: 51
  • Karma: 0
where's a good place to get parts ? gasket sets, hoses etc.
« Reply #8 on: June 27, 2006, 09:02:33 PM »
I'v had a look at these sights and will probably get a shopping list made, do a few more "car boot's" to get the funds up then bang in an order.

My mate at work, Shaun, is going to compleatly srtip, clean and rebuild the engine for me so will need all the parts first.
He's a great bloke and has a very understanding wife. Last week he finished an engine that he had been working on for a while and that he had dismantled in his kitchen for two weeks. !!!!!!!!

any more sugestions for parts are allways apreciated and thanks to every body for your advice so far.

RGDS
Issy :lol:
0 - 60 ---- Honestly !!

william

  • Super Member
  • ***
  • Posts: 187
  • Karma: 0
    • http://www.fiat126.co.uk
Re: where's a good place to get parts ? gasket sets, hoses e
« Reply #9 on: June 28, 2006, 01:53:53 PM »
Quote from: "issylupus"
:roll:

Hello every one.

I was wondering if any of you lot can put me onto somewhere where I can get gasket sets and other bits and bobs for my "£100. 126 aircooled"
 


dajwid lives in poland he can get postage quite cheap there aswell
Chris Lakin's Nephew