Author Topic: VW beetle engine/transaxle???  (Read 18744 times)

0 Members and 1 Guest are viewing this topic.

Tommo32

  • Super Member
  • ***
  • Posts: 115
  • Karma: 1
VW beetle engine/transaxle???
« on: June 11, 2006, 08:27:26 PM »
i read about this in a (very) old issue of custom car magasine. anyone ever done it or seen it done??? i happen to have some spare VW bits and im prety sure it would make a 126 fly, might need some sandbags in the front though!

any comments appreciated.

slammed 66

  • Super Member
  • ***
  • Posts: 126
  • Karma: 0
VW beetle engine/transaxle???
« Reply #1 on: June 11, 2006, 09:09:55 PM »







OK  its not a 126 but the principal is the same. This cars known as lil whopper and was built in the 60s in california and now lives in this country campaigning in the flat4 outlaw vw race series. It usually posts a 11.2 second quarter mile at 110-115 mph.
How quick a fairly stock 1600 would be i dont know but it would be fun :)
I'd reccomend a beetle gt gearbox or a late baywindow van gearbox.
Me and my mate Mark were measuring up the other day and reckon a 2.1 injection type 4 vw van flat 4 motor would fit and comes with 112 bhp in standard form :twisted:

slater

  • Super Member
  • ***
  • Posts: 215
  • Karma: 0
    • http://www.retro-rides.com
VW beetle engine/transaxle???
« Reply #2 on: June 11, 2006, 09:18:01 PM »
I think this is the most sensible way to give the 126 a worthwhile power gain. Tuning the 2 pot is fun but its just so damn hard to get bits for them (or so it would seme to me) and then even if you can get bits for the engine you still have to mate it to the crappy fiat box!

The flat 4 is highly tunable and it retains the aircooled 'charm' that the 2 pot has

Trouble is it kinda takes the novalty away so i dont think i would do it myself

Tommo32

  • Super Member
  • ***
  • Posts: 115
  • Karma: 1
VW beetle engine/transaxle???
« Reply #3 on: June 11, 2006, 09:47:13 PM »
main concerns are will it need narrowing? im presuming so. which would mean using a superbeetle gearbox (has halfshafts) would the engine fit in the back with no mods?

also what lets the 126 gearbox down? it would be easyer to mate something like a moto guzzi v twin engine but how much torque/bhp cvan you run through a 126 box?

slammed 66

  • Super Member
  • ***
  • Posts: 126
  • Karma: 0
VW beetle engine/transaxle???
« Reply #4 on: June 11, 2006, 09:56:17 PM »
Wwhat lets a 126 box down? It was designed for 23 bhp and a stock 1600 vw is 47 bhp and quite a bit of torque.

There is no way it will slip straight in and youd have to have adaptor plates made to fit to a 126 box which just wouldnt be worth the effort.

The gt box is virtually indestructable up to 120 bhp and has the longest ratios of any vw aircooled vw box so would still be good at accelerating and also pull some impressive cruising speeds

Tommo32

  • Super Member
  • ***
  • Posts: 115
  • Karma: 1
VW beetle engine/transaxle???
« Reply #5 on: June 12, 2006, 09:40:47 AM »
ive got in my garage a box from a 1967 1600 beetle (rare as hens teeth) a few boxes from 1500's and a box or two from a 1303-S (1600 superbeetle)

but surely you would need to narrow it and unless its a superbeetle box this would be very difficult.

what i meant with 'would it fit in with no mods' was will i need to have some sort of fibreglass thing on the back to cover bits that hang out or would it all fit under the 126 bodywork???

dajwid

  • Subscribers
  • Super Member
  • ****
  • Posts: 2932
  • Karma: 14
VW beetle engine/transaxle???
« Reply #6 on: June 12, 2006, 03:44:04 PM »
Well the most famous 126 in Poland 'Czerwony Krzyś' has VW power.
Volkswagena Scirocco 250 BHP 0-200 KMH 8.5 Seconds.  
(yes 200 not 100)

Now sits in a garage, he was building it with his son and he died, so the father finished the project to build the fastest 126 in the world.

Personall I think that the V8 powered ones in the UK are faster. could be a good head to head :D

slammed 66

  • Super Member
  • ***
  • Posts: 126
  • Karma: 0
VW beetle engine/transaxle???
« Reply #7 on: June 12, 2006, 05:18:55 PM »
I dont think there would be much if any engine overhang.
Narrowing? Not much need, i think youd only be talking a couple of inches at most.

dajwid

  • Subscribers
  • Super Member
  • ****
  • Posts: 2932
  • Karma: 14
VW beetle engine/transaxle???
« Reply #8 on: June 12, 2006, 08:05:23 PM »
VW G60 unit, delivering some 250hp (300hp on race settings). The box is out of an Audi 80. Total weight around 550kg.








slammed 66

  • Super Member
  • ***
  • Posts: 126
  • Karma: 0
VW beetle engine/transaxle???
« Reply #9 on: June 12, 2006, 10:15:23 PM »
:shock:  I know i shouldnt, but i love it!
 :smt049  :smt050  :smt060  :smt055  :smt054  :smt049

Tommo32

  • Super Member
  • ***
  • Posts: 115
  • Karma: 1
VW beetle engine/transaxle???
« Reply #10 on: June 12, 2006, 10:50:45 PM »
its hideous!

slammed 66

  • Super Member
  • ***
  • Posts: 126
  • Karma: 0
VW beetle engine/transaxle???
« Reply #11 on: June 12, 2006, 11:21:06 PM »
It is a bit max power i admit but its something totally different which is why i like it.  :oops:

Tommo32

  • Super Member
  • ***
  • Posts: 115
  • Karma: 1
VW beetle engine/transaxle???
« Reply #12 on: June 13, 2006, 09:12:39 AM »
theres a lotta work and even more filler gone into making that. hats off to who ever did it but i still stand by my previous comment!

aircooled head

  • Newbie
  • *
  • Posts: 9
  • Karma: 0
VW beetle engine/transaxle???
« Reply #13 on: July 19, 2006, 08:52:22 AM »
I like this thread.  I have built a number of tuned VW engines in the past, and also owned a number of Beetles.  I looked at the possibility of fitting a tuned VW engine in a 500, but its clear from that photo, that the alternator, wont clear the engine lid, and neithre do twin carbs, but the 126 seems to have a little more space in the engine compartment, so will it fit?.  Idealy you would want to fit a beetle box, but it would have to be a IRS box, with CV joints.  Does anyone know the width of track of a standard 126, I could measure this against a stock box and drive shafts, to see if it would fit.  Failing that the drive shafts, would have to be shortened to suit.  An alternative would be to fit an early pre 67 box, with shorter shafts, but the brakes, are not as good and harder to get.  Fitting sucha an engine would require uprating the front brakes to suit, what are the disk options?

126dave

  • Super Member
  • ***
  • Posts: 1534
  • Karma: 2
VW beetle engine/transaxle???
« Reply #14 on: July 19, 2006, 06:12:10 PM »
i had a custom car mag in the late '70s in it was a 500 with VW power,the shame was,it was an abarth 595 that he'd basterised...................had a prob with VW fans ever since.................... :lol:
28-34c and cold beers in the fridge