Author Topic: Tachos and other gauges  (Read 9850 times)

0 Members and 1 Guest are viewing this topic.

charlie

  • Newbie
  • *
  • Posts: 4
  • Karma: 0
Re: Tachos and other gauges
« Reply #15 on: March 28, 2010, 11:16:54 PM »
I think that is just the speedo drive.

The Harley Rev Counter/Tacho is electrical, so I was hoping it would work off the coil, however I was expecting wires out the back and not a socket

Did you find a connector for this tacho? As you only have to connect three wires couldn't you just use a similar shaped crimp connector, or solder them on?

I've just bought a mechanical tacho, i was thinking of running a cable off the distributor shaft (i've got no rotor arm), but it would require fabricating quite a few parts.

Dom

  • Super Member
  • ***
  • Posts: 473
  • Karma: 2
    • http://www.cardomain.com/ride/2915992
Re: Tachos and other gauges
« Reply #16 on: March 29, 2010, 10:12:31 AM »
I gave up searching for suitable connectors and ended up, as I so often do, selling it back on eBay for a substantial loss!

The local Harley shop didn't have any as they come as part of the complete wiring harness and were not sold separately.

bobblehead

  • Super Member
  • ***
  • Posts: 224
  • Karma: 1
  • monkeys on the move ..
    • my fiAT 126 PICK UP
Re: Tachos and other gauges
« Reply #17 on: March 29, 2010, 10:52:14 AM »
why not get a rev counter from a monkeybike ?? the exsist you know and they work off one cylinder dont forget he he :)

if i have asked for help .thanks in advance for helping and giving me advice .. all the very best to you all .. respeck monkeymoves .......

ape20ff

  • Member
  • *
  • Posts: 36
  • Karma: 0
Re: Tachos and other gauges
« Reply #18 on: March 30, 2010, 04:29:59 PM »
Hallo to everybody.
Everything is interesting. Maybe I'll be wrong but I' like to say something.
According me, better to use an electronic tacho, simpler and cheaper.
There are universal tacho that have a switch to select cilynders number.
Once upon a time there was a led tacho building kit made for 126. Very cheap, maybe 5 pounds. I'mnot able to find anymore.
The site should be this:
http://xlabs.pl/
If somebody finds new... make us know.
I don't know about jaycar kit but in confront of vellman one has more numbers on display:
http://www.jaycarelectronics.co.uk/productView.asp?ID=KC5290&CATID=25&form=CAT&SUBCATID=347
I don't think that wasted spark mode is a problem because the coil is always one so the number of ignitions too but it happens on 2 cylinders meantime.
Once upon a time tacho gauges were sold here too:
http://www.autoquariat.at/englisch/spare/stpu.htm
I think that can be used tacho from 2 cylinders 4 stroke motorbikes(as you already do) but from 1 cylinder 2 stroke as for exemple one made for vespa that doesn't reach high rpm so it will more accurate.
If you know what to change you can use tacho from 4 cylinders:
http://fiat126.hu/?p=79&a=147
The problem could be that the tacho can work fine with your ignition,I can't add something more but an exemple only:
http://www.ovingtonpaint.com/fiat/id5.html
I hope to learn something more.
Thanks a lot.
Good bye

ape20ff

  • Member
  • *
  • Posts: 36
  • Karma: 0
Re: Tachos and other gauges
« Reply #19 on: June 13, 2011, 10:48:35 PM »
Hello.
Take a look:
http://www.youtube.com/watch?v=GAqxoZXTQkA&feature=related
Have you see the digital tachometer?
Do you like it?

It's avaible in three different display colours,green,red and blue.
Easy to install,only three wires, a +,a- and wire to twist around an ignition cable like a timinglight.
They make tachometer for every engines,2-4 stroke,diesel,gasoline,1,2,3...cilynders.
You must only specify where are you going to install it .
For further infos contact:
[email protected]
They make gauges for E.G.T. and so on.
Bye.

nrg19uk

  • Super Member
  • ***
  • Posts: 579
  • Karma: 1
Re: Tachos and other gauges
« Reply #20 on: June 14, 2011, 07:33:49 AM »
I brought one of these of eBay 180571784416 cheap as chips but doesn't seem to work correctly! The numbers jump all over the place and it never seems to give a solid reading!

I also brought matching oil pressure/temp and volt meter, The volt meter needle has stuck round off scale voltage and
The oil pressure and temp gauge have worked faultlessly.... Buy cheap buy twice I suppose  :cry:
Neil gargaro

Aaron

  • Super Member
  • ***
  • Posts: 232
  • Karma: 0
Re: Tachos and other gauges
« Reply #21 on: June 14, 2011, 12:32:15 PM »
I had quite a bit of stuffing around with one of these over the last year,http://club126uk.co.uk/smf/index.php?topic=4164.msg34608#msg34608.

Basically, if you're running the dual outlet coil set-up I found the system produced quite a high number of spikes which buggers up the signal to the tacho, hence all of the numbers will seem to bounce.  If you look at my last post in the above thread this links to a tach filter which you can make which can cure the problem.  It stabilised the digital tacho I originally tried until 3000 rpm was exceeded and then the crappiness of the gauge came to the fore and it all fell over.

Using a quality gauge (harley or buell), with out the tach filter would jump all over the place but once the filter is added it's steady and reproducable.

Unless you pay top dollar on eBay with these digital gauges, the quality will be suspect.

thepuddlejumper

  • Super Member
  • ***
  • Posts: 685
  • Karma: 2
  • Location: Scotland
Re: Tachos and other gauges
« Reply #22 on: June 14, 2011, 12:40:18 PM »
I fitted a Harley gauge to my 126 and it worked fine, did not jump about, only had it wired temporarily for a day or two, what is the tach filter?

Ralph

Aaron

  • Super Member
  • ***
  • Posts: 232
  • Karma: 0
Re: Tachos and other gauges
« Reply #23 on: June 15, 2011, 05:19:42 AM »
It's basically just a capacitor, resistor and diode.  It's explained here http://www.camaros.net/forums/showthread.php?t=173302&highlight=tach+filter and you just make it yourself.  From what I understand (and that's not much mind you), electronic ignition circuits can cause transient spikes from the coil which can drive electronic tachometers mad giving jumpy readings.

When putting the Buell tach on my 126p, taking the signal from a spare lug on the twin spout coil, i got the exact symptoms of random behaviour with no real reading.  All I had to do was make up the filter as described in the link above and it cured the problem.  I'm starting to think from the 126 standpoint that it may be a peculiarity to the twin spout coils.