Author Topic: gearbox care!  (Read 5927 times)

0 Members and 1 Guest are viewing this topic.

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: gearbox care!
« Reply #15 on: October 26, 2010, 12:49:14 PM »
Is a noisy first a sign of the end being close?

My fourth is also a bit noisy, it whines :oops:
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

gsxr126

  • Super Member
  • ***
  • Posts: 405
  • Karma: 0
Re: gearbox care!
« Reply #16 on: October 26, 2010, 10:24:27 PM »
Darrell, I'm no expert but from experience the first gear whining is ok but the fourth gear whining might mean the end of your cluster gear. My box used to whine in fourth and when it died i found thats what it was. If its the same prob you just need one of those gb repair kits that go for about 100 pounds.

I do have a beef about the prices of these gb parts. I went to price completely new internals for mine and the total price came out to 751 euro before postage to Australia. You can buy a six speed getrag box for that kind of money. I suppose someone is getting rich of us enthusiasts >:(
The Good - White Niki all Std Daily Driver, The Bad - Black Niki GSXR1300 BMW diff & suspension, The Ugly - Red Niki quietly Rusting In Peace

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: gearbox care!
« Reply #17 on: October 26, 2010, 10:30:01 PM »
Yeah the whining hasn't got any worse and the box has done about 20000 miles as it is.

I been looking at the prices of gearbox internals as well and unfortunately I think we are stuck with 500 pricing as 126 parts end-up on 500's. And 500 owners seem to have deep pockets ;D

I guess we should be grateful we can still get stuff but it hurts when you have to :P
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

kitten75

  • Super Member
  • ***
  • Posts: 109
  • Karma: 0
Re: gearbox care!
« Reply #18 on: October 27, 2010, 06:24:31 AM »
Great advice re gearbox - I've been struggling a bit with first too and am paranoid about not using it unless at a complete stand still.  I have gotten into bad habits over the years of putting cars in neutral on approach to junctions/lights etc and then putting them in first whilst still rolling.  Aware with the 126 i can't do this (not that i understand what synchro is or any of the other technical terms!).  So, i take it from the advice here, it's ok to put in 2nd and then into first from there when at a complete stop?  I also find myself taking off in 2nd quite a lot but never from a complete stop.

Great advice, invaluable.

Mhairi

bis13

  • Super Member
  • ***
  • Posts: 2749
  • Karma: 39
Re: gearbox care!
« Reply #19 on: October 27, 2010, 03:30:53 PM »
i found if fourth whines the oil is low and needs topping up.

skelz

  • Super Member
  • ***
  • Posts: 183
  • Karma: 0
Re: gearbox care!
« Reply #20 on: October 28, 2010, 11:09:10 AM »
I thought I saw cheap gears and refurb parts on 126fan.sk and here http://www.fiatclassic.com/HTML126/KATA126U.HTM#gear%20box

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: gearbox care!
« Reply #21 on: November 20, 2010, 10:14:43 PM »
Checked the oil in the box today and it is a bit over-filled.
Still whines like normal in 4th.

Is there anything one should look for that would cause a gear to whine?

I can whip the box out and have a look inside, have quite a few spare gears so can change any in necessary.

I've never understood what they mean by 'backlash' can that cause a whine if that is not done correct?
I know there is a specific type of oil for gearboxes on a 126 but would standard 90 gear oil cause a hassle?
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

Kent126

  • Super Member
  • ***
  • Posts: 955
  • Karma: 5
  • Closer every day to getting on the road....
    • Facebook Profile
  • Location: Dorset, UK
Re: gearbox care!
« Reply #22 on: November 20, 2010, 10:36:33 PM »
I never use 1st gear on the move, only to pull away, or stop completely then change down.  [-/

Tom
1974 Italian Fiat 126 TA
1996 Fiat Cinquecento Sporting
2008 Fiat Panda 100HP

gsxr126

  • Super Member
  • ***
  • Posts: 405
  • Karma: 0
Re: gearbox care!
« Reply #23 on: November 20, 2010, 10:59:50 PM »
Darrell, i still think its your cluster gear/bearings. If you whip out the box and have a look i'll bet that the main (biggest) gear on that shaft will have teeth missing, also the gear it connects to below will/might have teeth missing. This puts a shock loading on the bearings on that shaft and will make the whining noise in 4th.

It usually takes me about half a day to "whip" out my gearbox

BTW nice wheels, never seen jelly beans on a 126 before. Old Skool Cool Rools
The Good - White Niki all Std Daily Driver, The Bad - Black Niki GSXR1300 BMW diff & suspension, The Ugly - Red Niki quietly Rusting In Peace

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: gearbox care!
« Reply #24 on: November 20, 2010, 11:08:19 PM »
Thanks for that, will whip it out next weekend.

I have to confess that the big bearing on the shaft that drives the diff went....but it was a while ago now and cannot remember if it was this box or the previous box :oops:
This box has been very good and like I say done about 20000 on it and doesnt show any signs of weakness but this noise.
Today we did about 60 miles and I sat there thinking it would be mighty pleasant if that whine wasnt there...

So if it was this box that had the bearing go, it makes sense there might have been some damage to the gear.

A silent 4th...I'd be in heaven! It's only taken 20000 miles to decide to do something about it  :P
Also it'll give me a chance to check if I have a BIS diff or not :oops:
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)