Guys,
How important is the oil thrower in the oil filter? The reason I ask is that I know my engine does not have one fitted. So far I haven't had any signs of low oil pressure or dirty oil. The oil pressure light goes out within 0.5 secs of the car starting.
Looking at the diagram in the Haynes manual, the flow through the filter is depicted as going from outside of the crankshaft to the outer edge of the pulley then flows inward into the hollow crankshaft. I would expect this to be operating in a flooded condition and as such this thrower to me looks more like a flow restictor more than anything if the depicted flow is correct. If this is such I'm guessing this ensures some oil flow to the cam shaft rather than total flow to the crankshaft.
Considering that the engines are doing between 2500 - 4500 rpm most of the time while driving, I wouldn't expect the centrifugal force to be high (in relative terms). Should I be thinking about finding one to re-install? The pic below is from the oil filter cleaning guide on here showing the thrower in question.