Author Topic: Steering Idler Box & Arm  (Read 1766 times)

0 Members and 1 Guest are viewing this topic.

Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
Steering Idler Box & Arm
« on: September 16, 2010, 07:08:16 PM »
Today's little task was to fit a new steering idller box & arm. Meaningless to you rack & pinion Guys  ;D
Anyway turned out a lot easier than I thought even though I just had the car front raised slightly with a bottle jack. Turned out that the one I removed had good bushes but the main bolt (or pin) was free to move when it should have been locked tight so the play was between arm & pin rather than worn bushes.
So poked a camera down there for the record , can you spot the little problem that I only spotted when I saw the picture on my computer  ??? :oops: ???

michaelodonnell500

  • Super Member
  • ***
  • Posts: 758
  • Karma: 7
Re: Steering Idler Box & Arm
« Reply #1 on: September 16, 2010, 09:41:39 PM »
The wonders of modern technology!!
Rust does not discriminate

Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
Re: Steering Idler Box & Arm
« Reply #2 on: September 17, 2010, 01:20:04 PM »
No eagle eyed guys out there then  :o

Eklipze3k

  • Super Member
  • ***
  • Posts: 632
  • Karma: 2
Re: Steering Idler Box & Arm
« Reply #3 on: September 17, 2010, 01:40:00 PM »
This stupid work PC won't let me see the full picture, I'll have a gander when I get home ;D

smallcox

  • Super Member
  • ***
  • Posts: 433
  • Karma: 4
Re: Steering Idler Box & Arm
« Reply #4 on: September 17, 2010, 03:43:51 PM »
 

Let me see, yes that's it, what a shame. no no. poor dude your NUTS are rusty, Rusty :oops:

air cooled, gt15 garret turbo with intercooler, 14x9" wheels with 225/40/14 toyos, front arb and disc brakes

Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
Re: Steering Idler Box & Arm
« Reply #5 on: September 17, 2010, 04:28:53 PM »
 :no: No wrong answer , get back on the naughty step  ;D
No rust on the nuts I used , as there is a lot of exposed thread on the captive mounting studs I did the same as on my exhaust to manifold nuts and used stainless stud connectors , also found some heavy duty stainless washers then after greasing the studs I sealed the end of the nut with a short stainless grub screw. Cost of fixings about £4 but I know they are safe & there will be no corrosion problems  [-/

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: Steering Idler Box & Arm
« Reply #6 on: September 17, 2010, 10:55:43 PM »
Oh my! I'd be very cautious of mentioning greased studs around heavy duty washers!! :oops:

I noticed it seems to be a 500 thing to have those long studs on the idler, can't think why they did that...
Sounds like a good plan you made there Rusty ;)
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)