Author Topic: Formulas, for the beardy sorts out there  (Read 1918 times)

0 Members and 1 Guest are viewing this topic.

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Formulas, for the beardy sorts out there
« on: July 22, 2010, 11:40:39 AM »
http://www.fortunecity.com/silverstone/chrysler/45/formulas.htm

and from another source:

Cylinder Swept Volume (Vc):
where:

            Vc= cylinder swept volume [cm3 (cc) or L]

            Ac = cylinder area [cm2 or cm2/100]

            dc = cylinder diameter [cm or cm/10]

            L = stroke length (the distance between the TDC and BDC) [cm or cm/10]


BDC = Bottom Dead Center
TDC = Top Dead Center

* Increase the diameter or the stroke length will increase the cylinder volume, the ratio between the cylinder diameter/cylinder stroke called “bore/stroke” ratio.

- “bore/stroke” >1 is called over square engine, and is used in automotive engines

- “bore/stroke” =1 is called square engine

- “bore/stoke” <1 is called= under square engine, and is used in tractor engine

 

Engine Swept Volume (Ve):

where:

            Ve = engine swept volume [cm3 (cc) or L]

            n = number of cylinders

            Vc = cylinder swept volume [cm3 (cc) or L]

Ac = cylinder area [cm2 or cm2/100]

dc =  cylinder diameter [cm or cm/10]

 

* The units of cylinder swept volume is measured in (cm3, cubic centimeter (cc), or liter)
- Ve  for small engines, 4 cylinder engines is (750 cc:1300 cc)
- Ve for big engine, 8 cylinder engines is (1600 cc:2500 cc)

 

 

Compression Ratio (r):


where:

            r = compression ratio

            Vs = cylinder swept volume (combustion chamber volume) [cc, L, or m3]

            Vc = cylinder volume     [cc, L, or m3]

 

* Increase the compression ratio increase engine power

- r (gasoline engine) = 7:12, the upper limit is engine pre ignition

- r (diesel engine) = 10:18, the upper limit is the stresses on engine parts

 

 

Engine Volumetric Efficiency (hv):

where:

            hV  = volumetric efficiency

            Vair = volume of air taken into cylinder [cc, L, or m3]

            Vc = cylinder swept volume [cc, L, or m3]

 

* Increase the engine volumetric efficiency increase engine power

- Engine of normal aspiration has a volumetric efficiency of 80% to 90%

- Engine volumetric efficiency can be increased by using:

(turbo and supper charger can increase the volumetric efficiency by 50%)

 

 

 

Engine Indicated Torque (Ti):




where:

            Ti = engine indicated torque [Nm]

            imep = indicated mean effective pressure [N/m2]

            Ac = cylinder area [m2]

                L = stroke length [m]

            z = 1 (for 2 stroke engines), 2 (for 4 stroke engines)

n = number of cylinders

θ = crank shaft angle [1/s]

 

 

Engine Indicated Power (Pi):

 

,                       

where:

            imep = is the indicated mean effective pressure [N/m2]

            Ac = cylinder area [m2]

            L = stroke length [m]

            n = number of cylinders

            N = engine speed [rpm]

            z = 1 (for 2 stroke engines), 2 (for 4 stroke engines)

            Vc = cylinder swept volume [m3]

            Ve = engine swept volume [m3]

            Ti = engine indicated torque [Nm]

            ω = engine angular speed [1/s]

 

 

Engine Mechanical Efficiency (hm):

 

 

where:

            hm = mechanical efficiency

            Pb = engine brake power [kW]

            Pi = engine indicated power [kW]

            Pf = engine friction power [kW]

 

 

Engine Specific Fuel Consumption (SFC):

 



where:

            SFC = specific fuel consumption [(kg/h)/kW, kg/(3600 s x kW), kg/(3600 kJ)]

            FC = fuel consumption [kg/h]

            Pb = brake power [kW]

 

 

Engine Thermal Efficiency (hth):

 

 

where:

            hth = thermal efficiency

            Pb = brake power [kW]

            FC = fuel consumption [kg/h = (fuel consumption in L/h) x (ρ in kg/L)]

            CV = calorific value of kilogram fuel [kJ/kg]

            ρ = relative density of fuel [kg/L]

 

« Last Edit: July 22, 2010, 11:48:13 AM by Darrell »
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

GTMaster

  • Super Member
  • ***
  • Posts: 809
  • Karma: 2
  • Na most a tuti- tuti- tuti
Re: Formulas, for the beardy sorts out there
« Reply #1 on: July 22, 2010, 07:22:46 PM »
Had to learn these at tech. school.... was never good at math, still have the formulas in my exercise book :)
"One more drink, Lacikám?"

All about car restoration can be found in the song
"Got my mind set on you" by George Harrison...

Jan-in-UK

  • Super Member
  • ***
  • Posts: 533
  • Karma: 5
Re: Formulas, for the beardy sorts out there
« Reply #2 on: July 22, 2010, 07:58:21 PM »
I think my life is WAY easier without having to know what it all means :) :) :) :) :)
Such a thing as Fiat 126p will never happen again to this planet... Love it.
www.fsoclub.co.uk

Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
Re: Formulas, for the beardy sorts out there
« Reply #3 on: July 22, 2010, 08:24:35 PM »
 :oops: :oops: :oops: Will there be an end of term test , I do not want to fail & be thrown off the forum  :cry: :cry: :cry:
I was trying to fit the 1908, 16 litre, 4 cylinder, ITALA into that set of figures . Is 4 litres per cylinder a big or small engine  ???