i have a little experience with bog (filler stuff.. dunno if thats an australian product name or what) but i have never done the paint, nor worked with a hole that i couldnt get to the other side of.
so, what i have is rust under the back window which has been filled and now swolen out again, it doesnt look to bad, and i have already sanded it back a bit and i think it will be easy to just add more bog then sand and paint. i also have a dent where the drivers door was over-opened, so theres no hole, but it has rusted because the paint was scratched off. i think this could be repaired by filling it and sanding it, but i dont know how i would go about making the bog stay there and not fall off. also there are holes on either side under the windscreen which have had sheet metal put in and then covered, but the bog has fallen off both. also i have a couple of holes next to the windscreen where a second aerial was added, no idea why.. but now i have holes to fill, and these are the ones i cant get to the other side of.
so can anyone help me with what and paper to use and what type of paint to go for, also how to do the holes? what i was guessing ws that i should hammer around the edges so that when i sand it flat afterwards theres bog overlapping the edges still. the only real hole is only a cm or a little more in diameter.
basically, i wouldnt worry too much, except i have to take it for a roadworthy test before im allowed to register it, and i hear theyre pretty comprehensive and will pick on almost anything. so i want to do the absolute best job possible..
also, i have four seats and only one has all it's springs in tact.. however i clearly only need two seats, so im happy to swap some springs around, if someone will kindly tell me how. i really couldnt get the good springs out easily, or at all, from underneath the seat.. and taking the upholstry off looked pretty difficult too. then once out, how do i get everything back in place so itll stay there?
also if anyone knows of anything common that will stop a 126 from passing, please let me know.