Hoping someone can tell me where I am going wrong, or confirm if am measuring this right.
I have been trying to calculate the offset of a late 126 aircooled rim
- I've measured a 126 rim width at 170mm. (This is the gross width and not the 'J' value stamped on the rim.)
- dividing this by 2 gives a centrline of 85mm
- backspace (inboard mounting face to inboard rim) = 140
- offset = backspace - centreline
- = 140 - 85 = 55mm
Using the same method I worked out the offset of a mk1 punto rim to be 68.5mm
I've found a few lists online that supply this data and while none of them can be verified, they all claim a punto should be between 30-40mm which makes a bit more sense to me.
Can anyone shed any light?