Author Topic: Exhaust??  (Read 1958 times)

0 Members and 1 Guest are viewing this topic.

markymarc

  • Super Member
  • ***
  • Posts: 571
  • Karma: 0
Exhaust??
« on: November 02, 2010, 07:27:58 PM »
Hello there, me again,

I want to get an exhaust made for my BIS (local guy willing to help) But do not understand the set up!!
I notice there is a pipe going from the manifold to the air-filter box then another running to the top/back engine bay (rubber part)  Can I do away with these or are they an important part of ?? Cooling? Heating? Air-filter working right?

Need to have an idea before I see the exhaust guy ??

Many thanks
marc

PS does anyone have a haynes manual or know where I can get one?

dajwid

  • Subscribers
  • Super Member
  • ****
  • Posts: 2932
  • Karma: 14
Re: Exhaust??
« Reply #1 on: November 02, 2010, 07:59:52 PM »
There is a Bis on here  :D, I think, is it still there ??


markymarc

  • Super Member
  • ***
  • Posts: 571
  • Karma: 0
Re: Exhaust??
« Reply #2 on: November 02, 2010, 08:49:36 PM »
Can't find the manual!!

Need the info on the exhaust system before saturday, PLEASE

cheers

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: Exhaust??
« Reply #3 on: November 03, 2010, 11:54:14 AM »
I would have thought one of the BIS faithful would have replied to your post by now, however I'll jump in as you seem desparate.

Air-cooler to the rescue...

I had a BIS and the exhaust is fairly simple.
Two pipes emerge from the head to a silencer box then out the back in a single exhaust pipe.
Air is sucked past the one pipe to heat the air  that enters the carb. during the cold weather.
This air comes from an arrangement on the one exhaust downpipe , and is then piped to the airbox. On the airbox there will be a switch to change from a summer to a winter setting.
Purchasing a new BIS silencer should give you the arrangement fitted to the exhaust.
Be cautious when unbolting and fitting a new exhaust, use penetrating oil and be sure not to leave any bolts out of the supports adn it will simply rattle loose if any bolts are left out and be sure to re-instal all locking washers etc.

Go to the top of the page and click 'Home' and then look in the subscribers section on the left I think it is.

Hope this link works:

http://club126uk.co.uk/index.php?pid=10
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

Eklipze3k

  • Super Member
  • ***
  • Posts: 632
  • Karma: 2
Re: Exhaust??
« Reply #4 on: November 03, 2010, 02:40:18 PM »
Poor Mark isn't a subscriber Darrell  :oops:

bis13

  • Super Member
  • ***
  • Posts: 2749
  • Karma: 39
Re: Exhaust??
« Reply #5 on: November 03, 2010, 09:19:18 PM »
i had a bis sport box that i bought from germany (on kraut bay) they do turn up now and then but do not have the hot air gizmo.

markymarc

  • Super Member
  • ***
  • Posts: 571
  • Karma: 0
Re: Exhaust??
« Reply #6 on: November 03, 2010, 09:50:37 PM »
Cheers guys, many thanks, how do I subscribe then?

One extra thing (sorry) if i did away with the hot air - cold air set-up would this affect the carb/engine in any way?

Thanks again for the help guys, i've now hit another problem!!
Went for a service today and whatever twat put the alloys on run out of bolts (2) and forced in the wrong ones and stripped the thread!! Now need an front hub (the bit with the tapered bearing in?)
Any sugestions on where??!!

Sorry chaps to be a pain

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: Exhaust??
« Reply #7 on: November 03, 2010, 10:21:50 PM »
The hot air thing is just to make the car react better in the cold weather. Might use marginally more fuel.....

Try fitting studs instead of binning the hub. Longer studs may help with the alloys too, and cheaper :)
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

markymarc

  • Super Member
  • ***
  • Posts: 571
  • Karma: 0
Re: Exhaust??
« Reply #8 on: November 03, 2010, 10:44:09 PM »
Do need longer studs but the guy has totally f****ed 2 threads (not good) so suggested new hub or helicoil??
Any suggestions on that one guy?

Thanks again for all the help, want her back on the road quickly

cheers
« Last Edit: November 03, 2010, 10:48:29 PM by markymarc »

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: Exhaust??
« Reply #9 on: November 03, 2010, 11:27:29 PM »
Bin the bolts and put studs through like some cars where they stick out the hub.

Hellicoil is not the way to go with hubs, what if it worked loose :-X
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)