I was about 1km from home and suddenly smelt a strong fuel smell. Pulled over and found a small fire in the engine bay. Whipped off my shirt and put it out. The brass fitting and fuel return line had come loose and was resting on the exhaust. Luckily it didnt burn thru (just) but fuel was still dribbling out of the carb and flaming up on the hot exhaust. Found a small twig and stuffed it into the fuel return hole, cable tied the burnt fuel return line to the engine hoist bracket, said a prayer all the way home, and got there with no dramas.
Have just fixed it and taken it for a run and all is well. I applied loctite to the brass fitting, cut the burnt bit of line off and reconnected it. I gave the carb a good clean while i was there as it was a carb off job.
I would recommend anyone with a 28IMB weber (std niki) check their brass fittings for a tight fit. A teltale sign is leaks around them and fuel puddles on the rear of the base plate. The potential for disaster is enormous.