Hi it's really easy. First you undo the lock nut on the gearbox end of the cable and wind it off completely then pull the cable though the clutch arm. Then go under the car and unhook it from a clip on the gear box. Next go into the car and remove the plastic centre trim (the one around the handbrake) and then the metal cover at the front and also the one at the rear.
Next up unclip the cable from the pedal end by simply unhooking it from the top. Go back out side and pull the whole lot out from the back of the car.
To replace it just fit it in reverse order to how I've explained - insert the new one from the gearbox end through the hole in the body work and guide it though from inside the car hooking the cable hook on the pedal end and pushing the other end through the clutch arm then refit the lock nuts, interior covers and trims and re fixing the cable to the gearbox.
Then adjust the clutch pedal height by unscrewing the lock nut in or out to rise or lower the pedal to approximately 20mm below the brake pedal
