« previous next »
Pages: [1]

Author Topic: Few bits to clear up left over from the BIS  (Read 3845 times)

0 Members and 1 Guest are viewing this topic.

poxxxy

  • Super Member
  • ***
  • Posts: 527
  • Karma: 0
Few bits to clear up left over from the BIS
« on: December 24, 2015, 02:33:55 PM »
Ok... I have a few things i've been holding onto but don't really need right now that I bought for the 126. I have the following available:
Boxed New Rear Fog Light (Polish made). £5 + P&P.
Boxed New Reverse Light (Polish made). £5 + P&P.
Bagged New Rear Number Plate bulb holder. £4 +P+P.
Brand new but no longer in original box Fiat 126 BIS water junction on the top of the engine. - £20 + P&P - sold to gadge
Brand new copper head gasket from Piotrek Krzyśków £20 inc shipping. - sold to 126blackbird
Driveshaft rubber boots and inner seals brand new. £20 inc shipping. - sold to Chris Hutton
Used Fiat 126 BIS engine lid £10 + shipping.
Marelli contact and points - unused but open boxed. - £4 inc shipping. - Sold to calumcosse
I do still have an engine lying around which I believe at least has good pistons/crank etc in there and was removed from a running car. I was planning on playing with in in the nearish future as I finally have somewhere I can start to fabricate the turbo manifold up but if anyone wants it £70 and you can take it away.
« Last Edit: January 10, 2016, 08:40:04 PM by poxxxy »
Logged
My 1991/2 Fiat 126 BIS Restoration: http://club126uk.co.uk/forum/index.php?topic=8559.90

126blackbird

  • Super Member
  • ***
  • Posts: 173
  • Karma: 5
  • Location: Maldon Essex
Re: Few bits to clear up left over from the BIS
« Reply #1 on: December 28, 2015, 11:47:51 AM »
Hi, I may be interested in some of the parts you have for sale, what is you location.
 
 Graham
Logged

poxxxy

  • Super Member
  • ***
  • Posts: 527
  • Karma: 0
Re: Few bits to clear up left over from the BIS
« Reply #2 on: December 28, 2015, 02:12:57 PM »
Hi Graham, its Lee that mailed you the other day about the blackbird project. I am near J12 of the M6. The driveshaft inner/outer boots i've promised to Chris. Everything else is still currently available.
Logged
My 1991/2 Fiat 126 BIS Restoration: http://club126uk.co.uk/forum/index.php?topic=8559.90

poxxxy

  • Super Member
  • ***
  • Posts: 527
  • Karma: 0
Re: Few bits to clear up left over from the BIS
« Reply #3 on: December 31, 2015, 09:38:18 PM »
Just to update... I have sold the carburettor to Daniel Ligeza, and the driveshaft bits to Chris :). Due to be picked up Saturday by everyones favourite my hermes for cheapness!

Looks like I may be breaking the engine...

I think I have sold a couple of my remaining BIS wheels that I was holding onto as a souvenir and also the alternator from the engine to someone localish in Birmingham who has a project almost back on the road. so there will most likely be pistons/cylinder head/block/crank/inlet/dizzy etc available if anyone is interested.
Logged
My 1991/2 Fiat 126 BIS Restoration: http://club126uk.co.uk/forum/index.php?topic=8559.90

Elson

  • Newbie
  • *
  • Posts: 3
  • Karma: 0
  • Location: ALFRETON, derbyshire, united kingdom
Re: Few bits to clear up left over from the BIS
« Reply #4 on: January 03, 2016, 12:28:48 PM »
Radiator??
Logged

dadandlad

  • Super Member
  • ***
  • Posts: 298
  • Karma: 8
  • Location: Halifax West Yorkshire UK
Re: Few bits to clear up left over from the BIS
« Reply #5 on: January 03, 2016, 04:45:52 PM »
I may have a spare radiator for a Bis just need to look in garage to confirm
Logged

poxxxy

  • Super Member
  • ***
  • Posts: 527
  • Karma: 0
Re: Few bits to clear up left over from the BIS
« Reply #6 on: January 08, 2016, 01:11:04 AM »
So I sold the wheels I had left over, I sold the copper head gasket, the points... I have remaining:

Brand New Bis Top Water Junction - sold to gadge
BIS Engine Cover (Rear boot floor) - £10 + p+p
New Rear Reverse Light and Fog Lights -  £4 each + p&p
Air Filter housing top £5 + p&p
Numerous Corteco engine seals, cam cover gasket, oil filter cap seal, inlet manifold gasket, some gearbox gaskets, orings. - sold to gadge
A bag of plastic capped screws for the light lens's to housings (the ones that break when you try to undo them). They are all clear plastic coloured. - sold to gadge
New Rear Number Plate bulb holder and harness.
Weber 32 ICEV carburettor.
Bis Engine with flywheel. - Pending collection Wednesday from calumcosse
Bis Starter Motor. - tried to fire it up today and doesn't seem to want to go but not sure on the connections exactly... - £10 + p&p
Bis inlet manifold. = £10 inc p&p

It would be nice to cut it down a little more if anyone is after anything :).
« Last Edit: January 10, 2016, 08:42:29 PM by poxxxy »
Logged
My 1991/2 Fiat 126 BIS Restoration: http://club126uk.co.uk/forum/index.php?topic=8559.90

DeVilleChris

  • Subscribers
  • Super Member
  • ****
  • Posts: 1217
  • Karma: 7
    • Club 126 UK
Re: Few bits to clear up left over from the BIS
« Reply #7 on: January 08, 2016, 06:25:05 PM »
Recieved mine thanks! :)
Logged
1979 Fiat 126 DeVille
1979 Fiat 900T Amigo

Gadge

  • Subscribers
  • Super Member
  • ****
  • Posts: 1353
  • Karma: 15
  • Location: Warwickshire
Re: Few bits to clear up left over from the BIS
« Reply #8 on: January 10, 2016, 09:18:48 AM »
PM sent :)
Logged
FOR LACK OF A BETTER NAME

GET SOCIALBLE.  Instagram me on _gadge_ ;D

poxxxy

  • Super Member
  • ***
  • Posts: 527
  • Karma: 0
Re: Few bits to clear up left over from the BIS
« Reply #9 on: January 10, 2016, 01:12:01 PM »
Replied
Logged
My 1991/2 Fiat 126 BIS Restoration: http://club126uk.co.uk/forum/index.php?topic=8559.90

poxxxy

  • Super Member
  • ***
  • Posts: 527
  • Karma: 0
Re: Few bits to clear up left over from the BIS
« Reply #10 on: January 10, 2016, 08:43:45 PM »
So i'm left with just the boot/engine lid cover... some lights and an air filter housing top, a weber carb that would need some modding to fit perhaps an aircooled, and a seemingly knackered starter motor. Any takers? :).
Logged
My 1991/2 Fiat 126 BIS Restoration: http://club126uk.co.uk/forum/index.php?topic=8559.90

dadandlad

  • Super Member
  • ***
  • Posts: 298
  • Karma: 8
  • Location: Halifax West Yorkshire UK
Re: Few bits to clear up left over from the BIS
« Reply #11 on: January 10, 2016, 09:53:15 PM »
Hi
Is the carb the single barrel version
Logged

Gadge

  • Subscribers
  • Super Member
  • ****
  • Posts: 1353
  • Karma: 15
  • Location: Warwickshire
Re: Few bits to clear up left over from the BIS
« Reply #12 on: January 26, 2016, 01:05:02 PM »
Completely forgot to reply - thanks for the bits :thumbup they arrived safe and sound :)
Logged
FOR LACK OF A BETTER NAME

GET SOCIALBLE.  Instagram me on _gadge_ ;D
Pages: [1]
« previous next »