Author Topic: Fire  (Read 1913 times)

0 Members and 1 Guest are viewing this topic.

andyzeetec

  • Subscribers
  • Super Member
  • ****
  • Posts: 533
  • Karma: 5
  • 126 BIS
  • Location: East Sussex, Uk
Fire
« on: August 06, 2014, 01:03:34 PM »
I'm glad I replaced my fuel pipes.

poor chap..
http://www.carandclassic.co.uk/car/C523032

 :o

Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
Re: Fire
« Reply #1 on: August 06, 2014, 01:24:50 PM »
Very unusual for a Bis to have a fire. It is usually the air coolers due to the higher temperatures in the engine bay but amazingly people still fit plastic on-line fuel filters between the fuel pump and the carb despite all the warnings  :o

baron_matt

  • Super Member
  • ***
  • Posts: 173
  • Karma: 0
Re: Fire
« Reply #2 on: August 06, 2014, 04:36:45 PM »
That car could be an easy project, looks pretty sound otherwise.

I don't really understand, why give up on that car as the current owner seems to have? It is mint and just needs a few easy to source parts and a touch of paint on the rear flank.

It seems mad to ditch the car for £950 when it would be well worth saving and keeping.

« Last Edit: August 06, 2014, 04:41:30 PM by baron_matt »

andyzeetec

  • Subscribers
  • Super Member
  • ****
  • Posts: 533
  • Karma: 5
  • 126 BIS
  • Location: East Sussex, Uk
Re: Fire
« Reply #3 on: August 06, 2014, 10:08:09 PM »
Very unusual for a Bis to have a fire. It is usually the air coolers due to the higher temperatures in the engine bay but amazingly people still fit plastic on-line fuel filters between the fuel pump and the carb despite all the warnings  :o

Where or what are the warnings Rusty, I'm guessing common sense would dictate fitting the filter in a cool place nearer the fuel tank?

I recently fitted a facet electric pump prior to getting the car on the road, but have noticed it gets very hot within the engine bay, might try and fit it closer to the tank if I get time, also checked out manufactures pump operating temp which is 80deg/C, so should be ok.

Any idea what petrol will boil at in a plastic inline filter or what the temp reaches in the engine bay on a bis, I see there is a hot air exit route out via the wing plastic vent/louvres. Mines got the hot air pipes missing on the exhaust, not sure if that effects anything. Anyway I will stop waffling now.
« Last Edit: August 07, 2014, 01:07:51 PM by andyzeetec »

poxxxy

  • Super Member
  • ***
  • Posts: 527
  • Karma: 0
Re: Fire
« Reply #4 on: August 06, 2014, 11:04:03 PM »
Hmmm yes that engine looks like it could go in mine  : 8) lol
My 1991/2 Fiat 126 BIS Restoration: http://club126uk.co.uk/forum/index.php?topic=8559.90