Author Topic: Stripping Gearbox  (Read 1396 times)

0 Members and 1 Guest are viewing this topic.

Adzdum

  • Member
  • *
  • Posts: 30
  • Karma: 0
Stripping Gearbox
« on: September 04, 2009, 04:13:21 PM »
Hi all, hope everyone and their little machines are doing well!

I was just wondering if there is a good guide that will aid my mission?..

Basically my BIS has oil leaks (mainly around the drive shafts) so having obtained a 'gearbox seal pack' from Holland I now need to preform the messy task of replacing them.

Never stripped one of these boxes before so any/all help is greatfully recieved!

Cheers,
Adz
« Last Edit: September 04, 2009, 04:32:59 PM by Adzdum »

Pete126

  • Administrator
  • Super Member
  • *****
  • Posts: 3369
  • Karma: 35
  • Location: West Yorkshire
Re: Stripping Gearbox
« Reply #1 on: September 04, 2009, 08:58:21 PM »
Hi Adz, Be careful when you disconnect the drive shaft coupler, There is an anti-rattle spring in the end of the drive shaft that can disappear very quickly somewhere under the car or drive ;D

There is a full manual in the subscriber section [-/ 
Pete.      il cavallo piccolo