Author Topic: Pauls BIS'n'Bits stage 5 fitting reverse lamp and fog (Read 8000 times)

James · « **Reply #1 on:** July 29, 2007, 06:17:27 PM »

had a second there trying to work out what those holes in the back were. just wondering ae you planning to cover them up or fill them? not that they look bad or anything.

Paul Clough · « **Reply #2 on:** July 29, 2007, 07:38:00 PM »

:?:
Hi James,
That is a real Dilema.... There are holes in the doors too where I took off the Bumper strips...

I am currently painting the bumper strips to put back on but it may look a little untidy with tiny crome bumpers...

Any ideas would be welcome? maybe a few Arbarth badges?
ha ha
:roll:

Pete126 · « **Reply #3 on:** July 29, 2007, 08:09:45 PM »

Hi paul i also removed the side bump strips, tapped the square holes in with a ball point hammer, used glass fibre on the back of the holes and then filled them with pod,

but i suppose its just how far you want to go

Paul Clough · « **Reply #4 on:** July 29, 2007, 09:17:57 PM »

:roll:
Hi Pete!!!

Love the handy work!!! I was hopeing for a smooth finish though!! looks like your body work abilities are as good as mine!!

Love it....

126dave · « **Reply #5 on:** July 29, 2007, 09:24:48 PM »

check out my 87 fsm in the garage,all holes closed,looks good IMHO.. :cool:

meuton · « **Reply #6 on:** July 29, 2007, 09:27:52 PM »

yeah i like the clean look too and will be welding up the holes in the doors but as i am going to replace the fron twing i shall simply put earlier wings without the holes on there, Car looks great with chrome bumpers, I always fancied molding a set of carbon ones if was to have bumpers on it for that "double look" affect lol

cheers Doug

Pete126 · « **Reply #7 on:** July 29, 2007, 09:32:34 PM »

aaaah this is what it looks like when its its been painted

126dave · « **Reply #8 on:** July 29, 2007, 09:34:56 PM »

doug,you cannot fit early wings to a bis or late a/c,they have a more flared lip and will not fit.

hey pete,good work,but why did you not get shot of the bumper pressings too???

Paul Clough · « **Reply #9 on:** July 29, 2007, 09:46:58 PM »

:shock:

WOW that looks great!!

meuton · « **Reply #10 on:** July 29, 2007, 10:09:24 PM »

Quote from: "126dave"

doug,you cannot fit early wings to a bis or late a/c,they have a more flared lip and will not fit.

hey pete,good work,but why did you not get shot of the bumper pressings too???

Dave

trust me you can, anythings possible with a little sweat and graft he he he

cheers Doug

bis13 · « **Reply #11 on:** July 30, 2007, 11:07:44 AM »

if you are going to go to the lengths of making ac wings fit the bis it would be easier to just fill the bumper holes on the originals as it will be more stressfull the other way round , but if its what you realy wish to do then good luck and dont forget some "anadin" for during and some "stella" for after you have finished the job

nathan126 · « **Reply #12 on:** August 03, 2007, 09:00:40 PM »

Ive just seen this on ebay, how come you're selling so soon? :sad:

Paul Clough · « **Reply #13 on:** August 04, 2007, 07:58:25 AM »

:

:
Hi Nathan,

Kinda personal really. We found out on monday that my wife is expecting another baby.... Which we are both very pleased about, but unfortunatly she suffers from a condition called "hyperemises" which in the past has hospitalised her from the 7th week of the pregnancy. Its a bit like the most severe morning sickness you can imagine... Anyway she will no doubt have to give up work again soon and this means I need the money to pay the bills and support my boys. Very sad but there you have it...

I hope to be back in 12 months or so...

Paul

nathan126 · « **Reply #14 on:** August 04, 2007, 08:21:03 PM »

ah, well i hope all goes well!

im sure you'll be 126ing again in no time :cool: