Author Topic: Heat Resistant Paint  (Read 1701 times)

0 Members and 1 Guest are viewing this topic.

ciccio

  • Member
  • *
  • Posts: 15
  • Karma: 0
Heat Resistant Paint
« on: April 03, 2010, 05:16:46 PM »
Hi Guys,

Happy easter to everyone..................

Am about to start building my 650 cc engine.Have removed the sump and was going to have this powder coated along with the cowlings but may just prep and paint with a heat resistant paint.
Can anyone advise of a good paint or does anyone have any other suggestions?

Many thanks
Ciccio

Amateb8

  • Subscribers
  • Super Member
  • ****
  • Posts: 2148
  • Karma: 8
  • Location: London
Re: Heat Resistant Paint
« Reply #1 on: April 03, 2010, 08:22:10 PM »
Halfords sell heat resistant paints in different colours.

bobblehead

  • Super Member
  • ***
  • Posts: 224
  • Karma: 1
  • monkeys on the move ..
    • my fiAT 126 PICK UP
Re: Heat Resistant Paint
« Reply #2 on: April 04, 2010, 07:46:56 AM »
ive used bbq paint in the past on bikes .. only comes in black though ?

can be brought from most diy shops .

halfrauds also sell high temp paint, infact i think i saw some glow in the dark colours he he

i guess a good prep is the key , as i think has been said before some high temp paints are better than others, but most tend to burn away and flake .. ( making your eng look worse than when you started )


good luck keep us posted
if i have asked for help .thanks in advance for helping and giving me advice .. all the very best to you all .. respeck monkeymoves .......

stuey

  • Subscribers
  • Super Member
  • ****
  • Posts: 1409
  • Karma: 14
  • Location: kings lynn
Re: Heat Resistant Paint
« Reply #3 on: April 04, 2010, 08:38:47 AM »
personally I'd go with powder it wont cost much more to powder a part like that than to buy some decent hi temp paint. To get it to stick and look good for any period of time youll really need it blast cleaned to get a decent key...just powder them once and be done with it- painted stuff just rusts again in a few months especially when it hangs off the bottom of the car..

heres my bis engine tins I had done for £50 (they where as rusty as hell when I handed them over) 6 months later they are still as good as this-



one resprayed and another arrives- double trouble BIS style!!

neilW

  • Member
  • *
  • Posts: 29
  • Karma: 0
Re: Heat Resistant Paint
« Reply #4 on: April 30, 2010, 09:27:43 AM »

Powder coat = Pristine finish, already heat treated (this is part of the process), greater selection of colours, cost effective/cheap, chemically treated and either blasted or orbital sanded before powdered.

Heat paint = bitty finish, expensive, chance of flaking and peeling if metal is not prior treated.

POWDER COAT!! [-/