« previous next »
Pages: 1 [2]

Author Topic: engine components  (Read 8365 times)

0 Members and 2 Guests are viewing this topic.

Chris Lakin

  • Super Member
  • ***
  • Posts: 2105
  • Karma: 0
    • http://www.fiat126.co.uk
engine components
« Reply #15 on: November 19, 2005, 06:33:45 PM »
hi toz, i got your email about hosting pics, i replied but the email came back to me as undelivered email the pics to me m8 and i will host them for you.

regards

Chris
Logged
+ SKYPE USERNAME: fiat126.co.uk
+ CLUB (ENQUIRIES): [email protected]

richard

  • Super Member
  • ***
  • Posts: 424
  • Karma: 0
engine transplant
« Reply #16 on: November 20, 2005, 07:47:51 PM »
the engine is in , now forgot to take some crucial photos.... but all seems to be well .

i need a little screw, i will get one from halfords,  and then tomorrow i am going to test it see if it fires and runs etc etc ?

i do however have some wiring issues under the bonnet , please see pictures at :  
 http://uk.pg.photos.yahoo.com/ph/riche100/album?.dir=/5ea9&.src=ph&.tok=phydl7DBPNaLKsgy


and tell me if this is what its meant to look like under the bonnet ??  and if so is anything missing ??  as i have a connecter that comes from both side lights/ or indicaters left and right side . to a plug  .. but then nothing for the plug to go into ???


im confused, pleas eget in touch

reguards

richard

p.s see you in the chat room tonight
Logged

richard

  • Super Member
  • ***
  • Posts: 424
  • Karma: 0
engine transplant / problem
« Reply #17 on: November 20, 2005, 07:54:12 PM »
also before i forget, i have a wire from the distributer ....

where on the coil does it attach ?

the opposite end to the other wire ???

its a black wire ? and seems to be the olny one from the dizzie ?

any help would be great
Logged

richard

  • Super Member
  • ***
  • Posts: 424
  • Karma: 0
problems
« Reply #18 on: November 21, 2005, 08:18:19 PM »
hello there, i tested the engine today after installing it ??

serveral problems : it blew fuse number 7 ??

it turned over but was very noisy and sluggish on turn over ?

could it be starter? or if starter was faulty wouldnt it turn??

it didnt really fire ? but not sure if the other problams were stopping that ?

there was power at the alternater even with igition off ( is this normal) and it was sparking (or seemed to be shorting out for some reason) ????? .. i did put copper seal on the thread so the bolt wouldnt seize i future could this have been the trouble ?

the battery isnt too good atall, so cpould this be the reason behind the sluggish turn over ? still doesnt explain the noise does it ?


has anyone got any ideas atall please?

as honestly if i do not get the little devil going i am afraid my fiance has told me it has to go , and i would rather keep it ..
Logged
Pages: 1 [2]
« previous next »