Author Topic: Steering on Bis  (Read 2384 times)

0 Members and 1 Guest are viewing this topic.

ciaoflyer

  • Super Member
  • ***
  • Posts: 1325
  • Karma: 3
Steering on Bis
« on: July 09, 2009, 08:21:30 PM »
Hey!

Our Bis seems to have heavy steering.  When I am driving it and turn right it then pulls right.  Then turn left it then pulls left.  Also get some clunking noises when turning.  The steering has got heavier after fitting alloys it is a little better on the standard wheels!

Anyone got any advice on how to rectify this.

Thanks in advance [-/
Ciao4Now

Gordan

  • Subscribers
  • Super Member
  • ****
  • Posts: 1689
  • Karma: 8
Re: Steering on Bis
« Reply #1 on: July 09, 2009, 08:43:01 PM »
all i know is that my steering got a lot easier when i lubricated the kingypingys, try that...
oh and what size are your alloys, ive changed from stock to alloy and noticed no difference
PLEASE FOLLOW MY PROGRESS ON IG: https://www.instagram.com/fiatbis/

bis13

  • Super Member
  • ***
  • Posts: 2749
  • Karma: 39
Re: Steering on Bis
« Reply #2 on: July 09, 2009, 09:46:51 PM »
if its clunking when your turning that normally means you have wear in the kingpins lowering along with wider wheels places more stress on these parts and so wear quicker did you alter the camber and toe in when you put the wider wheels on?

ciaoflyer

  • Super Member
  • ***
  • Posts: 1325
  • Karma: 3
Re: Steering on Bis
« Reply #3 on: July 09, 2009, 10:01:41 PM »
I have not lowered but do have wider wheels, I did not mod the camber or the toe in.
Ciao4Now

bis13

  • Super Member
  • ***
  • Posts: 2749
  • Karma: 39
Re: Steering on Bis
« Reply #4 on: July 11, 2009, 04:18:11 PM »
grease the king pips up and check for play in them and also check for play in the wheel bearings .

ciaoflyer

  • Super Member
  • ***
  • Posts: 1325
  • Karma: 3
Re: Steering on Bis
« Reply #5 on: July 23, 2009, 07:50:24 PM »
Thanks for all your help, Greased the pins and it now steers like a new car! :D
Ciao4Now

Chris Lakin

  • Super Member
  • ***
  • Posts: 2105
  • Karma: 0
    • http://www.fiat126.co.uk
Re: Steering on Bis
« Reply #6 on: July 23, 2009, 10:27:39 PM »
good advice Mick!

nobody bothers greasing the Kings Pins but its as important as changing teh engine oil!! Costs a fortune to replace them  and a pain.

i carry my grease gun around with me!

Regards

Chris
+ SKYPE USERNAME: fiat126.co.uk
+ CLUB (ENQUIRIES): [email protected]

phreak97

  • Super Member
  • ***
  • Posts: 576
  • Karma: 2
  • Niki!
Re: Steering on Bis
« Reply #7 on: August 09, 2009, 01:53:43 AM »
what's the process for greasing the kingpins? is there a grease nipple on them?
--
phreak97