Club126UK

Fiat 126 Chat => Fiat 126 Chat => Topic started by: mintex on May 19, 2015, 09:30:43 PM

Title: tyre sizes
Post by: mintex on May 19, 2015, 09:30:43 PM
do you think my tyre sizes are a little to big? and how much will they be affecting the gear ratios bearing in mind its a standard engine and i have no plan on changing it.

At the moment it has 165/65/13 and although they do fill the arches nicely but going by the manual i have standard size is 135/70/13, is that right?

Cheers  :)
Title: Re: tyre sizes
Post by: Pete126 on May 19, 2015, 10:01:53 PM
Most of us with wide rims 5.5j x13 are running 165x55x13 checkout the chart below
Title: Re: tyre sizes
Post by: mintex on May 19, 2015, 11:12:45 PM
ah ok cheers pete  they look like my next buy then  :good:
Title: Re: tyre sizes
Post by: mintex on May 23, 2015, 06:28:03 PM
Are my standard 13" fiat wheels 5.5 wide?
Title: Re: tyre sizes
Post by: Pete126 on May 23, 2015, 08:21:41 PM
Standard steel wheels are 4j X 13" ;)
Title: Re: tyre sizes
Post by: mintex on May 23, 2015, 09:51:48 PM
ah, so i cant replace my 165/65/13 with  165/55/13's as they will not fit ?  
Title: Re: tyre sizes
Post by: mintex on May 24, 2015, 09:38:13 PM
This is how it looks with the 165/65/13's on .

(http://i128.photobucket.com/albums/p161/suzuki998/Fiat%20126/20150524_210922_zpse3s2hbfg.jpg)

(http://i128.photobucket.com/albums/p161/suzuki998/Fiat%20126/20150524_210915_zpse3adoyjx.jpg)
Title: Re: tyre sizes
Post by: mintex on May 24, 2015, 10:30:11 PM
Found this calculator and if i have it right i think they will fit but what do you think, yes or no??

Title: Re: tyre sizes
Post by: Pete126 on May 25, 2015, 09:12:41 AM
If they don't rub inside the wheel arch especially on full lock or weight in the car leave them on, I presume you were going for the Mud Plugger look :P
Title: Re: tyre sizes
Post by: mintex on May 25, 2015, 12:01:21 PM
I presume you were going for the Mud Plugger look :P

haha  :lol: no they were on when i bought the car and thats when i checked what the standard size should be.

They don't rub, but  they get very close when turning and with weight in the car and as you say, looks like a 4x4 lol, think i will change them for some lower profile  ;)
Title: Re: tyre sizes
Post by: Pete126 on May 25, 2015, 02:13:57 PM
With standard rims i would stick with 135x70/80x13's with standard tires fitted the ride will be allot softer than the 165x65x13's that are fitted,  if you fit Cinquecento/Seicento (fitment) 5.5j alloys the max size without body mods is 165x55x13's

http://club126uk.co.uk/smf/index.php?topic=2332.0
Title: Re: tyre sizes
Post by: mintex on May 25, 2015, 06:05:34 PM
cheers bud, i will pop to the local tyre shop and have a word  :)

The main reason i want to change them is the gearing as these tyres have a larger rolling radius  :D