Club126UK
Fiat 126 Chat => Fiat 126 Mechanical Problem Solving => Topic started by: Dom.kelltt on January 13, 2015, 04:52:50 PM
-
Right guys, how hard is it to swap the pcd of my hubs? As I'm sure some others of you have also found it quite difficult to find some decent looking wheels? Or does anyone know somewhere that does a wide range of wheels?
Thanks Dom
Ps I know it's not mechanical but thought this slot in the forum was best thanks
Sent from my iPhone using Tapatalk
-
There's loads of nice wheels around for the 4x98 PDC Just type it into ebay and see :D but if you must you can get away with 4x100 on the fiat hub so long as you use wobbly bolts. I don't like them personally but othes use them with success :)
-
Ahh right ok then, what about going about swapping to another pcd? Have you heard of any stories to which it has worked? Thanks anyway I'll have a look cherr
Sent from my iPhone using Tapatalk
-
It's not been known to swap them to another although in theory it could possibly be done if you machine new holes in the hub flanges but you'll need precise engineering equipment to do this. I've never seen conversion adaptors either.
-
I've found some woooooop! However I've now found some great looking wheels that are very rare for a 126 so I think I shall be saving for those :) thank you for your help too gadge :)
Sent from my iPhone using Tapatalk