Club126UK

Fiat 126 Chat => Fiat 126 Mechanical Problem Solving => Topic started by: Bruce on May 12, 2006, 09:22:02 PM

Title: Question about the guttering...........
Post by: Bruce on May 12, 2006, 09:22:02 PM

this is not strictly a mechanical problem more one about body work. a part of the gutter moulding on my bis was missing so i went to my local fiat dealers and got new mouldings. the guttering though comes in 2 straight mouldings, my old ones where glued in place and had gone brittle. I suspect they where only glued on after the car was resprayed as there is no mention of glue in the manual. also the guttering looks as if it will stay put without glue. what my question is when putting it on will it bend around the corners at the top of the front and rear screens or should i aply a bit of heat (will have to use my wifes cooking blowtorch as i have no power at my garage)?

cheers

Title: Question about the guttering...........
Post by: 126dave on May 12, 2006, 10:02:04 PM

hi bruce,all three of my 126's had some kind of glue in place to hold the mouldings,but i have replaced only (original) the aircooled ones and have not used glue.they hold very well,
as mine were pr used,they were already formed to shape,i guess you will have to gently heat them to fit,i would not bother with any ''gunk'' to fit them,its good to remove them time to time and wax the inner gutters.

Title: Question about the guttering...........
Post by: Chris Lakin on May 12, 2006, 10:51:07 PM

the early 126's didnt have any plastic guttering trim did they?

also Bruce can i ask how much you paid, you have a super local fiat dealer, if i went to mine aqnd asked for that stuff they would laugh at me!!! :lol:

regards

Chris

Title: Question about the guttering...........
Post by: Bruce on May 12, 2006, 11:09:33 PM

my old italian built 126 did not have any, the new ones i got were £17.15 for the pair, i gave the parts guy the part number and they showed as being in stock. when i went in ealier they could not find the part number, so i got it myself from a 2003 parts catalogue i got off ebay.

Title: Question about the guttering...........
Post by: dajwid on May 13, 2006, 06:17:13 AM

Stick them in hot water and they go soft. just rub them them in place till hard.
 (I know what you are thinking, kep it clean) :???:

As was said, the early ones had no guttering.

Title: Question about the guttering...........
Post by: Bruce on May 13, 2006, 01:00:32 PM

no access to hot water at my garage, and i would need a pretty big container to get them in.

Title: Question about the guttering...........
Post by: dajwid on May 13, 2006, 06:00:55 PM

Just pour the boiling water over them, thats how I did mine.

take a flask :lol:

Title: Question about the guttering...........
Post by: Bruce on May 14, 2006, 01:15:33 AM

good idea, i may try that