Club126UK
Fiat 126 Chat => Fiat 126 Chat => Topic started by: Darrell on May 12, 2006, 12:11:53 AM
-
Took a bit of doing but my 126 BIS is through it's MOT after some welding, king pins, but nothing else...
5 years according to the records it has been idle and amazingly the brakes are still ok, lights etc etc.
So now came the road tests..
As one does, I decided it worth my while to let the little girl prove herself to me, and for me to prove myself a worthy tuning assistant!
Well she's got into a habit of not wanting to pump fuel when hot!
I suspected there might be a need for a new fuel pump however, through desparation I removed the pump on the side of the road only to discover that fuel was pumped in abundance once I worked the pump by hand!
The fault it seemed lay with the mechanism which consisted of a rod which appears from the inner engine. Could this rod be too short? All I know is there is a bit of a clatter like a loose tappet coming from the area so I am wondering if the rod was too short and has got shorter through a bit of knocking up and down over 31000 miles to the extent that it becomes just a little too short once the crankcase has done a little expansion!
I shall keep you posted on the outcome, however initial tests proved the ignition was too far advanced (pinking) but she is capable of 60mph easily.
She has not done any motorway work yet as I need to be confident she is up for it.
£14 fills her up and she did 145 miles on a tank which I am sure is a little lame as I have noticed she is performing alot better now that brakes and various tuning has taken place. I have also rectified a leak where the filler pipe connects onto the tank ( my fault as I thought it was on enough after replacing fuel gauge float).
My heart is crying out for more of this delightful little wonder and have decided to have a look at a few little extras, just a little something from me to her to say thank you for being mine and giving me such fun over the last few months.
Although she was meant to take me back to my youth when my first car was a fiat 500, I have found the 126BIS to be much better suited to every day traffic speeds.
The simplicity makes it such a joy to work on. If only every day life was as simple!!
I will certainly make every effort to make an appearance at your next meeting to bring her and me among friends.
Many thanks for the wonderful website.
Darrell :cool:
-
Congratulations on the pass. Don't let her stand idle so long next time, poor thing.
-
Keep er lit fella :D
-
congrats Darrel,
my BIs pinks i retarded the ignition timing but i still get a little bit of pinking, appaently we should use higher octane fuel "super unleaded" with 97-99 RON, this is supose to remove the pinking.
is it ok to run 97+ RON in a bis? :???:
-
congratulations by the way im in a history lesson there is only one way to make it fun and that is t5o go on the fiat 126 website
-
What are we learning about today William.I loved history at school.
-
:sad: oh no u have been historianified im studying castles
at the moment the mott and bailey castle is probbaly the best one
bet u dont know that mr historian
-
hi darell, well done on the mot pass.
you said you were having problems with your fuel pump,
if you hear a clatering noise from the fuel pump push rod then you may be right the rod may have worn. you may be able to fix this with a new gasket, they come in three different thiknesses get the thinnest one. check also that it isn't bent, failing that get new rod.
i have just done some welding on my bis, the driver side undersill, it looks a bit ruff at the moment but not bad for a first attempt and much cheeper than getting the so-called profesionals to do it. i just need to get some new stub axle and carrier units and then shes in for her mot.
-
neil have u got a bis or aircooled?
always advised to keep a road and pump witt you in the car as i found out :D
any more welding needed?
regards
Chris
-
Well now William we have an awful lot of castles over here,and the only complete walled city in europe(I think) :wink:
-
:lol: definetly historianified
-
Best days of yer life fella.Wish I was back at school with what I know now.Now that would be fun :lol: I loved maths and science.Bit of P.E especially the rugby and hockey.Then there was art,got an o level in that as well as maths,biology,english lit,computer studiesand history.Funny thing is I've more qualifications now than when I left school.Lots and lots of exams through work.So the moral of this story is keep the head down nubie and work hard it will pay off in the end :cool:
-
oh i know lots of maths and im good a t science
-
good lad
-
hi chris i have an F reg bis, shes lemon yellow and shes been my constant project for the past three years, i have spent an absolute fortune on it buying new bits from <gerstle>, my very first car was a 127 which i bought for 75 pounds and sold as scrap three months later for 50 pounds, i got a 126 after that which was in much better condition than the one i have now, but i'm sorry to say that my foolish antics put it in a big ditch, that was the end of that. my mum wasn't very understanding and would not allow it back home so it was taken by the scrappy hwo sold it to school kids. they made it into a buggy.
i have just about finished all the welding, i have not bought new panels, everything is just flat underneath so sheet steel was used should have all the jacking pionts remounted by the end of the day.
-
Hey Neil!
My Bis is an F reg ...might be twins!
Maybe I should come take a look at your project..in my BIS..hopefully.
Give me a shout by PM
Thanks for all the encouragement guys.
I have just been this Sat to Ricambio and bought a new rod and gasket bit. I figured I should just replace all and start afresh and will be fitting it tomorrow along with new points condenser oil and checking valve clearances.
The whirr turns out to be a wheel bearing which is also being done this weekend.
I am contemplating taking the thermostat out during the summer as the temp seems to go a little too far up before it wants to come down.
I was told by Ricambio they have a kit for £100 which solves this by moving the thermostat, alas I am in the dog's box for spending too much on it so that will have to wait, and I am trying to get-over the embarasment the wife felt while broken down on the side of the road with the fuel pump issue.
However all is forgiven as far as I am concerned for my little BIS and I shall persue ideas on cooling improvements.
PS I have no pinking whatsoever now so maybe I should check-out mine with a timing light. Maybe I have blundered into a solution for the pinking?
I also thought about alloys as a little treat for my baby however was told £100 per wheel so that will have to wait for later.
I have seen pictures of Cinquecento wheels on a BIS so figure that would look cool.
Also asked if a performance pipe could be aquired which the answer was no.
I Just thought it would be cool if it didnt sound so quiet.
I thought the 500 station wagon pipe might fit as I have removed the plastic bit under the bumper on mine. That bit of plastic looked a bit odd to me and thought it looks better off but may change my mind later.
If the plastic bit is gone... would a 500 station wagon pipe fit? and could I get a performance pipe?
Would a louder pipe give better performance?
I am sure I'll find out one way or the other.
But I just feel she is too quiet.
One needs a little noise to let people know there is a proper engine in it!!!
Besides if they can better the performance of the 500, we should be able to better the BIS and give the BIS credit for the advances made from the 500 design.
It has to be better, faster etc etc being water cooled and bigger!
So far it has proven it can be a fairly exciting drive up to 40 mph.
I am not expecting a Ferrari out of a few mods but maybe just something to make 500 owners a little envious..LOL