Club126UK
Fiat 126 Chat => Tuning & Customising 126 Models => Topic started by: Bruce on May 06, 2006, 06:01:35 PM
-
when i had my de-ville i used a smaller steering wheel i picked out from a boot sale for ten bob, it was a 12 or 13 inch Mountney with a fake leather rim. i cut the spokes of the original wheel and used this as a hub with the default hornpush. with my latest i picked up a new 14 inch leather rimmed Mountney from a the bargin bin a few years ago and bought the proper boss for the 126 Bis, i was not happy the the default horn push though so recently i got hold of a Fiat bonnet badge and used that as the hornpush; i think it looks pretty cool:
(http://www.bruces-stuff.pwp.blueyonder.co.uk/126sw.jpg)
Recently I saw a 12" mountney with fiat 126 boss and an Old Fiat 500/127 Abarth steering wheel was sold on eBay, and i am sure i have seen pictures of 126s fitted with non-standard steering wheels. I wondered if the wheels from ebay went to users of this forum and any ather non-standard wheels that people have fitted, also anybody got any interesting gear lever knobs? please post any pictures you have of your wheels and knobs :)
Don't even think about it
-
:cool: Nice steering wheel ... sporty & classic !
-
ive got a leather on to go on its an astrali one, but its extremly dished will get a pic of it.
-
picked up a nice used mountney leather one with boss from ebay......only snag is the push button is for an early 126 not an fsm,got to sort that out at some point.
has anyone lowered there column?? i want too but have been to busy with motor etc to look,is it straight forward to drop it?? like a mini?.
gear shifter is a brake knob from a wheel chair,small and round.....with 2'' cut from shift lever....i can get these free if anyone wants one,we scrap ''ministry'' chairs every week.
-
I managed to get a boss for my Bis quite easily, not of the shelf granted but did not take long to order, i guess as the Bis was made by FSM the boss should also fit the FSM aircooled cars aswell.
-
(http://www.dropshots.com/photos/73614/20060507/024100.jpg)
(http://www.dropshots.com/photos/73614/20060507/024101.jpg)
this is my astrali steering wheel bought off ebay last year, which i will be putting on my aircooled. i think its too dished what do you think??
also the actual steering wheel seems a bit thick, but its leather and go kart like, so im happy
regards
Chris[/img]
-
:cool: Damn Chris ... it's a steering for a 126 dragster ...
you need now a "Simpson Bandit helmet" ! :lol:
(http://www.simpson-deutschland.de/rx8.jpg)
-
depends on how deep your boss is. if you cut the spokes off and drill the original it should be about right, my boss brings the wheel out a couple of inches. when i used the original boss on my de-ville with the mountnoy wheel which was no as deeply dished as yours i had to modifly the stalks so they did not foul my hands, that wheel should be just about right. only problem i can see is your speedo might be obscured, so you won't be able to see when you go into warp speed.
-
haha a dragster!!! :lol: :lol:
what speedo Bruce i only have a red light come on to tell me ive hit the 100mph mark :lol: :lol:
yer i hope it fits ok,
Chris
-
Mines fitted with a cinquecento wheel as standard along with cinq switches and windows
-
does the cinq steering wheel fit on or does it need a boss, as there are nice cinq wheels on ebay quite often? also how can you use cinq windows as surely they are a different shape?
-
The cars were re-styled in the mid ninties.They did away with the quarter windows in the doors and fitted the cinq mirrors.I think the wheel will fit earlier cars not 100% sure as mine has cinq switchgear (stalks).It should work.Sorry Bruce made a mistake meant to say door mirrors in first message not windows.
-
OK
-
:???: can a Fiat 500 "boss" and "steering wheel" can be install on a Fiat 126 ?
-
yer i believe so m8 i think they are the same, Bruce is the one to ask!
-
i think it depends on which 500 and which 126 you have. mine was for a bis it may also fit later aircooleds. i think italian built 126 shared the boss with the 127 and possibly the last 500s. If you get hold of a 500 wheel/boss and it don't fit it will be easy to sell it on on ebay. If you just get a wheel it may be possible to adapt a standard wheel to act as a boss; doing that also means you can use the standard horn push, thats what i did with my first 126.
-
I have a wheel for a 500L but the slalks(cinquecento) would need modified,as in do away with the self cancelling mechanism.
-
i think it depends on which 500 and which 126 you have. ....
I've got a 1989 - 126 Bis ...
:arrow: If some of you, saw on eBay a sporty steering wheel and boss than can fit a 126 bis let me know ... :wink:
-
:cry: who can tell me if you see a FIAT 126 BIS boss + steering wheel (like a Mountney) on eBay ??
-
there is a french company called Ector that do a universal boss that will take a wheel from most of the popular wheels such as mountnoy and Momo, you would probably be in a better position than most to contact them and see if they do one that will fit yout Bis. also Mountnoy definatly used to do a boss because i have one, also Momo may do one. Once you have your boss any wheel will do. You could even make a boss out of your standard wheel.
-
:cry: well Ektor dont have a 126 BIS hub boss ... if you see one for a Mountney on Ebay send me a MP :wink:
-
the boss and steering wheel that i have was advertised as for early 126,but they went straight on my fsm 650,only the hooter button electrics/ center cap did not fit...i used the mountney center cap and rewired the horn to another swtich...
-
there's an arbath steering wheel on ebay, it has what looks like a MOMO size centre so you will be able to modify your original wheel to take it if you cant get hold of a hub/boss.