Club126UK
Fiat 126 Chat => Your Restorations => Topic started by: Rory126bis on July 18, 2014, 02:48:30 PM
-
I recently went out and bought my self a nice little blue bis for £400. The car itself was on a sorn but did run and engine and gearbox were sound, the only fault being the body having a fair bit of rust and the usual repairs needing done (suspension, brake system etc).
Since purchasing the 126 I've put it up on a ramp taken all 4 wheels and hubs off, taken the front leaf off, stripped the interior and started to cut out all rotten parts of the body.
The end result (hopefully) will be a 126 that could be used as my daily driver.
-
Good luck Rory :) looking forward to your resto thread
-
Thanks for the kind words! I will try and figure out how to upload photos here without them being over the allowed file size do I can show you all my work so far!
I've managed to get a bit of pace on in regards to the work so if all goes to plan the 126 could even be running within 4 weeks!
-
Try downloading program called InfranView, that is what I'm using to resize my pictures, really works a treat.
-
If you don't mind me asking, how many miles has it done? I got the same, a yellow BIS rhd for £400 body is sound, like not even slight rust but there's a few problems with the engine, it's on 34k ATM, wandering how your getting on?
Sent from my iPhone using Tapatalk
-
Hi sorry for the delay in getting back to you ;D
My 126 is coincidentally on 34,000 too! I picked mine up for £500.
I'll try and get some pictues up tonight of the work so far!
-
Ah it's fine :) and that sounds like a very good price :)
Sent from my iPhone using Tapatalk
-
This is the latest picture, all welding done, new suspension, just a case of fitting the interior and a respray and I'll be hitting the roads of Aberdeen in the 126 :)
-
Some of the pics of early work/ when i first got the 126
-
The price was okay.. But its a drop in the ocean to what this is going to be costing me all in :o Couldnt resist having this rear engined, rear wheel drive car! Especially at 17 will be a good laugh! :P
-
i could have been doing with that lift FAIR PLAY TI YE YOUNGEN owen nw ;)
-
The 126 progress has been slow but it seems im finally reader for the MOT! ;D
Most of the works done just need to get the rear back plates on and it'll be ready to go! Disks also fitted on the front and all welding is done :o Hopefully ill get some pictures up this weekend!
-
bet its costing a least 5 times more than u thought owen nw
-
Thankfully I've managed to get a lot of the work done from the help of friends and family so its been okay so far Owen :D The only thing im dreading is the respray :cry:
Brakes will be bled and the car under sealed this week and that's it 99% there :)
-
keep it coming brillant owewnn w ;D
-
Long overdue photos of the fiat, thats the disks fitted, under sealed, waxoiled and through the MOT (First time!) Also fitted a 110psi quad air horn which is also fun :D
Just got to sort out the paintwork and a tiny bit of filling to be done! Had it out on trade plates and have to say its the most fun I've had driving a car!
-
More Photos
-
And before any mentions it the KE20 above in one of the photos is sadly not mine but my brothers haha..