Club126UK

Fiat 126 Chat => Fiat 126 Mechanical Problem Solving => Topic started by: andyzeetec on January 27, 2014, 01:19:29 PM

Title: Odometer not working?
Post by: andyzeetec on January 27, 2014, 01:19:29 PM
Odometer isnt working but the speedo is. To start off with I was thinking cable or drive, but the speedo is working fine?

Any ideas?

Thanks
 


Title: Re: Odometer not working?
Post by: grubscrew on January 27, 2014, 06:58:44 PM
Try extracting the inner cable, and if it looks shorter than the car, its broken. You could undo it at the gearbox end, should be easier.
Title: Re: Odometer not working?
Post by: Pete126 on January 27, 2014, 07:19:21 PM
Odometer isnt working but the speedo is. To start off with I was thinking cable or drive, but the speedo is working fine?

Any ideas?

Thanks
 

Well its not the cable, only thing to do is take the speedo out and check that a previous owner hasn't knackered the cogs
Title: Re: Odometer not working?
Post by: andyzeetec on January 27, 2014, 10:17:50 PM
Odometer isnt working but the speedo is. To start off with I was thinking cable or drive, but the speedo is working fine?

Any ideas?

Thanks
 

Well its not the cable, only thing to do is take the speedo out and check that a previous owner hasn't knackered the cogs

ok, thanks.
Title: Re: Odometer not working?
Post by: grubscrew on January 28, 2014, 05:35:51 PM
Odometer isnt working but the speedo is. To start off with I was thinking cable or drive, but the speedo is working fine?

Any ideas?

Thanks
 

Well its not the cable, only thing to do is take the speedo out and check that a previous owner hasn't knackered the cogs
Sorry I didnt read the post correctly. Mike
Title: Re: Odometer not working?
Post by: andyzeetec on January 28, 2014, 07:08:44 PM
Odometer isnt working but the speedo is. To start off with I was thinking cable or drive, but the speedo is working fine?

Any ideas?

Thanks
 

Well its not the cable, only thing to do is take the speedo out and check that a previous owner hasn't knackered the cogs
Sorry I didnt read the post correctly. Mike

no worries