Club126UK
Fiat 126 Chat => Fiat 126 Chat => Topic started by: kev126 on July 24, 2013, 01:17:36 PM
-
I understand some members have theirs on their BIS, where can you get them from? I've checked out 500mania website but there only seems to be one and it's the fiat 500/aircooled 126.
Any links would be great!
-
They are all the same so a 500 one would fit, but there is a cheaper option to lower the front by modifying the standard spring. I`ll put some more info up laters.
-
Hi mate, I know all about flipping and retampering the standard spring, it'd just be nice to have a fresh new one with the eyes already reversed :)
And the 500 ones don't fit unfortunately
-
Who said the 500 one doesn`t fit? I`m pretty sure I swapped them around before :$
Here are few pics.
(http://imageshack.us/a/img534/7273/gybz.jpg)
This is how it`s done on the CCZero.
(http://imageshack.us/a/img194/8674/phu9.jpg)
How it looks. Much straighter than standard.
(http://imageshack.us/a/img94/3113/gtsn.jpg)
And this is how the 126 sits with it fitted + lowered alloy blocks and rear shocks.
Not mega low, but it`s fine for me and the car doesn`t bottom out.
I know some guys tried the reverse eyed leaf spring, but the car hasn`t actually dropped that much. This is a straight forward and cheap option.
-
I read that Pete bought one and it was too short. They don't fit the polski air cooled either! But many thanks for the pictures, the more the merrier as I've not played with leaf springs as of yet.
-
Might have been the other way round and I fitted a 126 leaf on a 500. Can`t remember.
The 126Fan guys also do a reverse eyed leaf spring.
Here is the link.
http://www.126fan.sk/eshop/index.php?main_page=product_info&cPath=10_30&products_id=829&language=en
-
As said in my first post I can only find the reversed eye spring for the older aircooled 126 and 500 (the spring fits both)
What I'm after is one for the BIS which will be much wider but I can't find one anywhere
-
The BIS and AC should be the same. The track on both cars is identical.
-
I bought mine from priotetti's - it was for a 500 fitted fine on my bis- no tools other than hand tools,stands, trolley jack and some brute for and ignorance- fitted just fine!
-
May have to take a risk! Then again retampering is free :P I spent a fair sum on the AC rear shocks so we'll see :) many thanks chaps
-
Stueys car is about 3and a half inches lower than mine (we put them nose to nose and measured), he knows how to do it.
Marc
-
The rear shocks are different on the bis. I think Steyr Puchs use the same if you want some fancy ones.
-
They're for the front to replace the longer BIS standard ones :)
-
put A/C rears on when you lower it- thats what I did...see my thread for all the shennanigans- http://club126uk.co.uk/smf/index.php?topic=1022.30
-
.....just a note re leaf spring , removing is okay but reinstalling you must pre tension the spring before offering up to the car and bolting on. Dont expect to bolt it on without doing it or the ride height/ handling will be somewhat interesting. Mike.
-
I'm in the process of trying to lower and stiffen up the suspension (and eliminate lift off oversteer above 90!) on my Bis so am at a similar stage to you. I've read up loads and from what I have found I am going for a 5 leaf reverse eye front leaf with rear shocks fitted to the front, then new rear shocks with 17cm springs. I'll be fitting 13x5.5 wheels at the same time (as well as disc conversion!) so if it isn't sat low enough I'm planning to cut the front mounting blocks. I'll let you know how I get on!
-
I fitted the reverse eye spring on my Bis but to be honest i think i would have been better taking the original spring to a specialist re-manufacturer who can flatten the spring to reduce the ride height as 126 owners do in Poland,
I bought the spring from 500 mania and although it may fit the 500/126 aircooled it produces allot of positive camber on the Bis and does not lower the car to what i wanted, The only way i can get the front end down is by putting some weight in the front boot, there are mods you could do to sort out the positive camber and that's to weld the hole in the top suspension arm and then re-drilling the holes further in on the arm to create negative camber ;D
-
as pete top arms can be easily modded to effect the camber- i also lost a leaf from mine to get it lower...
-
Just dropped my leaf off to an engineering firm in Portsmouth today. I'll let you all know how I get on with them and their work in due course.
-
I posted this link a whiie ago, I think this is how Steve (Smallcox) lowered his 126 Turbo
http://www.jalopyjournal.com/forum/showthread.php?t=90824
-
I have that bookmarked :)
Question - you have to cut off the clamps at either end of the spring to take it apart. What do you use when you put it back together? Or do you just leave them off?
-
You got to remove the clamps Kev, if you go back 1 page, look at the cc zero and you'll see an alternative :thumbup
-
I never even noticed! And that's exactly what I had in mind to do :) cheers mate