Club126UK
Fiat 126 Chat => Tuning & Customising 126 Models => Topic started by: ten_pence on July 07, 2013, 01:16:24 PM
-
hi everyone, what turbo engine can i put in my 126 ? was thinking honda civic turbo? also what box would i need?
any help would be gratefull as i want to turbo my 126. i have standard engine in the mo and engine is so sweet and runs lovely is it possible to put turbo on standard engine and just bore it out and upgrade cam etc??? would this be possible ( water cooled engine )
-
Is your car air or watercooled?
If you want to do the work any engine can be made to fit. Someone has a v12 Lamborghini engine in an original 500.
Marc
-
Is your car air or watercooled?
If you want to do the work any engine can be made to fit. Someone has a v12 Lamborghini engine in an original 500.
Marc
Mine is water cooled. Can I have bigger pistons put in and have it bored out and different cam? Also su carb with a turbo
Many thanks Simon.
-
I don't think they can bored out much. The only possible cam swap I can think of would be from the 704 cinquecento, but the engine turns in the opposite direction so the profile is probably wrong. There is very little that can be done to a BIS tuning wise.
Marc
-
well now im scratching my head, can anyone recommend a engine swap and what gearbox would I need? and driveshafts? will a punto gt engine fit? or punto gt turbo engine fit? with punto gearbox? I know everyone saying any engine but advice on which way to go would be gratefull
-
:$ http://club126uk.co.uk/smf/index.php?topic=7448.0 :D
-
You wuold probably be best searching the forum for engine swaps, the BIS engine bay isn't as tall as the aircooled so will need more cutting about to get most engines in. I would personally look at mounting a bike engine on the standard gearbox, then you have reverse and less faffing with the drivetrain. You might be better off going for a torque engine as opposed to a bhp engine. I would quite like to stick a Harley twin in an aircooled.
Marc
-
You wuold probably be best searching the forum for engine swaps, the BIS engine bay isn't as tall as the aircooled so will need more cutting about to get most engines in. I would personally look at mounting a bike engine on the standard gearbox, then you have reverse and less faffing with the drivetrain. You might be better off going for a torque engine as opposed to a bhp engine. I would quite like to stick a Harley twin in an aircooled.
Marc
that sounds a nice idea any suggestions on bike engines?? for the gearbox??
-
I would always look at a twin or a single, maybe a triple but they have cooling issues. A four pot will probably be too wide to fit with the crank inline to the gearbox.
-
The possibilities seem endless, depending on your bravery... :P
Aprilia RSV 1000
http://club126uk.co.uk/smf/index.php?topic=7467.0
[youtube]http://www.youtube.com/watch?v=5P6m0SuNmfQ[/youtube]
Suzuki GSX-R
[youtube]http://www.youtube.com/watch?v=m3C08khXc6o&feature=endscreen[/youtube]
Yamaha R1
[youtube]http://www.youtube.com/watch?v=-d1tZfRmeTA[/youtube]
BMW K75
[youtube]http://www.youtube.com/watch?v=kp0oO-rEkiI[/youtube]
-
TBH I think you need to get in touch with the guys at Retro Power, they will be able to advise you what is necessary to build a UK legal conversion! Not many members have attempted a project like this.
http://club126uk.co.uk/smf/index.php?topic=5582
-
How about something within these lines?
http://www.ebay.de/itm/Fiat-126-500-127-600-mini-cooper-Giannini-Abarht-Tuning-Breiitbau-55-Ps-novitec-/281132064817?pt=Automobile&hash=item4174c6e031
I`m not a big fan of the bike engine conversions and can`t imagine it will work well with the standard gearbox anyway, unless you go the whole way and do something like Pete put a link to, but it`s not much of a 126 anymore.