Club126UK

Fiat 126 Chat => Fiat 126 Chat => Topic started by: Hazey-n-Marc on March 23, 2013, 08:29:23 PM

Title: wheel fitment chart
Post by: Hazey-n-Marc on March 23, 2013, 08:29:23 PM
I am planning to put a wheel fitment chart together, any info on offset and centre hole size would be great, also, what year did they change to 4x98, and what was the pcd before?

Cheers

marc
Title: Re: Re: wheel fitment chart
Post by: eben80 on March 23, 2013, 09:04:09 PM
4 x 190
Title: Re: wheel fitment chart
Post by: Hazey-n-Marc on March 24, 2013, 11:12:16 AM
Cheers Eben.

Right, I know 4x100 will fit with wobble bolts, but will 4x95.25 or 4x101.6?
I also need to know the biggest wheel possible without modifications (width, height and offset), the height will be limited by tyre sizes.

Found this!! http://www.automobile-catalog.com/tire/1988/717935/fiat_126_bis.html
Title: Re: Re: wheel fitment chart
Post by: eben80 on March 24, 2013, 12:43:27 PM
I'm sure Pete or someone else would know that. I'm still contemplating a move away from 4x190 at the moment :)
Title: Re: wheel fitment chart
Post by: JonW126 on March 25, 2013, 09:49:01 PM
Using the link.... Am I to assume I couldn't fit a set of Mini Classic 175 50 13's to the 126 ??
Title: Re: wheel fitment chart
Post by: gason on March 25, 2013, 11:06:20 PM
That is one purchase I dont want to get wrong buying the wrong tyres or wheels  ;D
Title: Re: wheel fitment chart
Post by: JonW126 on March 25, 2013, 11:43:52 PM
That is one purchase I dont want to get wrong buying the wrong tyres or wheels  ;D

I know ..... Where is the help when you need it !?!

Title: Re: wheel fitment chart
Post by: kev126 on March 25, 2013, 11:48:47 PM
As long as you know the width (J) and offset (ET) and tyre size of the wheels you want to check, visit www.willtheyfit.com

HOWEVER you'll need to know your cars current wheel width and offset

Standard wheels for Fiat 126 BIS

4J (four inches wide)
ET +31
PCD 4x98

Hope this helps
Title: Re: wheel fitment chart
Post by: gason on March 26, 2013, 12:32:26 AM
Cheers Kev until they are on the car I wont be happy
Title: Re: wheel fitment chart
Post by: Hazey-n-Marc on March 26, 2013, 09:12:18 AM
I am putting something together to help with wheel fitment, the above link gives you tyre fitment, but obviousl;y you have to have wheels on it first that actually fit.
Title: Re: wheel fitment chart
Post by: JonW126 on March 26, 2013, 06:45:22 PM
As long as you know the width (J) and offset (ET) and tyre size of the wheels you want to check, visit www.willtheyfit.com

HOWEVER you'll need to know your cars current wheel width and offset

Standard wheels for Fiat 126 BIS

4J (four inches wide)
ET +31
PCD 4x98

Hope this helps

Good man ..... Cheers for sharing your knowledge.
Title: Re: wheel fitment chart
Post by: Hazey-n-Marc on April 03, 2013, 12:33:28 PM
What is the biggest wheel anyone has fitted without modification? Need the offset, width, and diameter. would also be great to know the full tyre sizes as well.
Actually, any non standard wheel and tyre sizes ( J, ET, Inch) and full tyre size would be great, as well as spacer, wobble bolt info and what car they were meant for. The more info I get the better my chart will be, and the less "will this wheel fit?" threads should be needed.

Cheers

Marc