Club126UK
Fiat 126 Chat => Your Restorations => Topic started by: madbaz on January 03, 2013, 08:37:55 PM
-
hehehe love this thing!
Got lucky with a spot from a friend on rero rides and picked her up nice and cheap, been looking for a little while for a dead cheap one to fix up, but one that was more or less complete and ran. ( Seen alot of dogs )
Well I hit the jack-pot with this one.
(http://sphotos-c.ak.fbcdn.net/hphotos-ak-prn1/740006_550566101620318_1181917404_o.jpg)
(http://sphotos-b.ak.fbcdn.net/hphotos-ak-ash3/736072_550354644974797_1124799940_o.jpg)
(http://sphotos-c.ak.fbcdn.net/hphotos-ak-prn1/531909_10151235384353842_87224160_n.jpg)
The fella i got it from was kind enuff to throw in almost a whole other car in the form of spares into the deal ( most of which will be sold once iv sorted through it all! )
So far things are looking pritty good, only a small amount of welding , a gear box mount, a exhaust swap, and small timing adjustment being all thats needed to make my little car roadworthy again.
-
Welcome, Enjoy :D
Quote. 'a exhaust swap'. The fun begins ::)
-
Hi and welcome , :) very nice looking car/ project , keep us informed of progress and a list of spares that are up for grabs hint hint Pete
-
The exhaust doesnt look that hard ???
(http://sphotos-e.ak.fbcdn.net/hphotos-ak-ash4/739842_10151240896908842_1917759059_o.jpg)
Most of this has got to go, and i have 2 sets of bumpers in good nick Iv no need for!
Still digging through it - most the interior too as i dont want it :P
-
welcome to the forum ;D
-
welcome to the forum ;D
Hellooo! - have read your build thread many times these past few months while looking for a car!
I shall be picking your brain soon ;D
-
Hello and welcome to the forum!! The car looks in good condition. I look forward to the finished product!!
-
Hi welcome to the forum
Looking forward to problem finding. Watch that exhaust ;D
Is it going to be a restoration or a modification
-
Hi welcome to the forum
Looking forward to problem finding. Watch that exhaust ;D
Is it going to be a restoration or a modification
2nd person to point out the exhaust? Should I be worried?
And tbh - bit of both , looking at fitting a bike engine at some point over the summer. 1st jobs to get it on the road again. I have 2 other cars so its kind of a side project/toy , just want it as a cheap run about. Tho i think iv fallen in love.
-
The exhaust it doesn't last that long and it a sod to get on small gap and it just doesn't fit around the end of the engine I think it would be easier to take the engine out to fit it
I'm restoring one at the moment i think the car is fun without changing anything
Good luck
-
ahhh fantastic it sounds like a bundle of fun lol - perhaps ill make my own up!
Idealy id like to swap the leaf spring out and drums out on the front but thats hopes and dreams lol :)
-
The exhaust doesnt look that hard ???
(http://sphotos-e.ak.fbcdn.net/hphotos-ak-ash4/739842_10151240896908842_1917759059_o.jpg)
Most of this has got to go, and i have 2 sets of bumpers in good nick Iv no need for!
Still digging through it - most the interior too as i dont want it :P
I may want the relays :-) and some wiring.
-
The exhaust doesnt look that hard ???
(http://sphotos-e.ak.fbcdn.net/hphotos-ak-ash4/739842_10151240896908842_1917759059_o.jpg)
Most of this has got to go, and i have 2 sets of bumpers in good nick Iv no need for!
Still digging through it - most the interior too as i dont want it :P
I may want the relays :-) and some wiring.
That's do'able! Think thats a full loom there and the one on the cars fine! Open to offers or swaps on anything ^^
-
how much for the loom?
-
how much for the loom?
You tell me, whats it worth? Apperes to be in good nick and looks to be tagged up. Ill drag it out for more photos if you like?
Sent from my MB526 using Tapatalk 2
-
Done a little bit more of the strip down to see what im playing with...
(http://sphotos-h.ak.fbcdn.net/hphotos-ak-ash4/740956_10151240896993842_1367705609_o.jpg)
(http://sphotos-b.ak.fbcdn.net/hphotos-ak-ash4/740774_10151240896968842_139093679_o.jpg)
I need a headlight (fittings broken at the back) apart from that it looks like just TLC to me.
-
Hi would be interested in drivers seat /no splits and front and rear bumpers also both wing mirrors cheers Pete
-
Hi would be interested in drivers seat /no splits and front and rear bumpers also both wing mirrors cheers Pete
I need the seats pete! Wing mirrors and bumpers are a go - tho the rear bumper wont have any lights.
-
Only one photo as im a little peeved.
Got lots of rust treated, changed engine mount, decided to clean up the dizzy a bit and tweek the timing since the engine was over running slightly .... and guess what - wont start. Turns over ok, got fule got spark choaks moving freely but no starty :( going to have to retime the engine when i can be bothered and work out whats happening. Not what i wanted to be doing tbh.
(http://sphotos-b.ak.fbcdn.net/hphotos-ak-prn1/47718_10151245696903842_845956764_n.jpg)
Back ends sitting nice , not got round to the front yet.
-
If the car has been sitting for a while fuel goes stale, all I can say is when I first got mine I changed the battery and the fuel and it started strait away
-
(http://sphotos-b.ak.fbcdn.net/hphotos-ak-prn1/47718_10151245696903842_845956764_n.jpg)
Back ends sitting nice , not got round to the front yet.
back end looks good! how did you lower it?
-
Itll be fine, just needs a little time and tinkering. Focusing on the body work to stave off the rot before the weather gets bad again!
Sent from my moblie with my thummy wummys.
-
(http://sphotos-b.ak.fbcdn.net/hphotos-ak-prn1/47718_10151245696903842_845956764_n.jpg)
Back ends sitting nice , not got round to the front yet.
back end looks good! how did you lower it?
The cheap and nasty way, cut the springs! Going to weld in spring holders so the arms dont droop. :)
Sent from my moblie with my thummy wummys.
-
Got my backside in gear and retimed up the engine - think it'll fire up now :$
(http://sphotos-e.ak.fbcdn.net/hphotos-ak-snc6/703888_10151250605408842_2113065581_o.jpg)
Yet to try it as im going to change the exhaust next so i thought i'd leave it for the moment.
(http://sphotos-g.ak.fbcdn.net/hphotos-ak-ash3/736505_10151250605348842_1142795129_o.jpg)
Looking a littleugly at the moment. :(
-
(http://sphotos-e.ak.fbcdn.net/hphotos-ak-prn1/68656_10151258446483842_1720148035_n.jpg)
(http://sphotos-h.ak.fbcdn.net/hphotos-ak-snc6/309656_10151258446418842_184227409_n.jpg)
(http://sphotos-b.ak.fbcdn.net/hphotos-ak-ash3/406069_10151258446453842_234359670_n.jpg)
-
Very low, very cool!
-
lol yeaaahhhhh wont go lower with out tubbing the arches i dont think/.
How to the mounting blocks for the front leaf come off the car anyone? One of the bolts isnt looking to clever and im worried its going to sheer.
-
Got some free wheels - just need smaller tyres 175/70 surprizingly doesnt fit! :$
(http://sphotos-h.ak.fbcdn.net/hphotos-ak-snc6/705628_10151265279633842_1073872761_o.jpg)
-
How did you lower the front? I've heard removing the second leaf or simply just reversing it does the trick?
-
This was the plan (to reverse the leaf) I then decided to grind the mounting blocks down. I did this and refitted the set up but to be honest with you because it all looked so sorry for its self iv decided to revise the whole front suspention set up - when the snow clear and i can get working on it ill post some photos.
Bare in mind im doing all the work my self on this and the budget is no more then a few ££ for the whole car at the moment.
Update :- wishbones and shocks have been ordered along with some tyres that should fit, so im now pending weather :(
-
Cheers mate :) I know how you feel - I have next to no money to do mine up so need to do it cheaply! Keep up the good work, got my eye on this one!
-
If you decide to lower it id save up for alowered leaf spring - and get afew people to help you fit it , its not easy.
I'll pop up lots of photos when i get into the build. Very tempted to do discson the front ATM too. Damn snow!
Meanwhile heres my other car
[youtube]http://www.youtube.com/watch?v=K57A06BxEgw&feature=youtu.be[/youtube]
[youtube]http://www.youtube.com/watch?v=ZacH3ZRlFbg&list=UUOUY8b2M0ndxCthV0hszmZA&index=4[/youtube]
-
Nice!!!
-
go to the blacksmith he can straighten spring (cold!!). each feather individually and on equal height ..
http://rezerwa126p.pl/forum/viewtopic.php?t=4278
here is in polish but use translator and will be fine
-
Coilovers turned up today mmmm multi-adjustable :P now the measuring begins! :cry:
-
:o the tiny shocks i have might be too big! ??? mental lol
I may have miss judged how small this car is ^^ , im glad they didnt cost alot, ill mount them and see where the car sits first i think. So now its only my wishbones im waiting on - very much doubt ill get them before sunday now which is a shame as it means i cant do all that much. On the upside the snows now gone and 2 of my tyres have turned up so at the very least i can get the back end sat level.
Sunday will now be spend making repair sections to weld on and painting the footwells up i think.
-
I think the front axle weight is about 200kg's, so 100kg's a corner minus the unsprung (brakes wheels tyres etc) so you probably need springs and shocks suitable for 80 to 90 kilos. Some people have had issues getting springs and shocks that actually work with such a small load.
-
Thats exactly why iv elected to use ones from a quad - tho i still think these will be too long!
With the fact that there is no rollbar inplace ( and i wont be fitting one!) you need a slightly higher spring/shock rate then 90kg otherwise you'll havea flobberly rolly boat of a car. Iv gone for 175lb...and a 300mm shock. Just looking at it i think i needed a 120lb and a 250 shock but we'll see!
-
The suspension needs to be a little soft on the front, otherwise you will just end up with the front end tramping across the road all the time, mate of mine did that to a beach buggy, pants were filled! Suspension is there to keep all of the wheels on the ground.
-
madbaz for a reason ;)
-
I recently fitted a reverse eye leaf spring to my car. It was the one with 6 leafs(a pain in the ...), so wasn`t as low as I was hoping it will be and used rear shocks on the front as they are shorter. I don`t know how the car is going to behave yet as I haven`t driven it, but it feels very hard. We`ll see.
How did you get the rear so low? Did you just cut the springs?
I only cut one turn and used shorter shocks, but I`m not happy with it. It feels a bit bouncy and I think I`ll have to use some of these.
http://www.ebay.co.uk/itm/300825438667?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Sometimes it`s better to invest in a proper set up to make sure it all works as it should.
-
I recently fitted a reverse eye leaf spring to my car. It was the one with 6 leafs(a pain in the ...), so wasn`t as low as I was hoping it will be and used rear shocks on the front as they are shorter. I don`t know how the car is going to behave yet as I haven`t driven it, but it feels very hard. We`ll see.
How did you get the rear so low? Did you just cut the springs?
I only cut one turn and used shorter shocks, but I`m not happy with it. It feels a bit bouncy and I think I`ll have to use some of these.
http://www.ebay.co.uk/itm/300825438667?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Sometimes it`s better to invest in a proper set up to make sure it all works as it should.
Iv taken 2 coils out to work out the height id like. ill see how it rides but as their the standard springs im expecting in to be pants - how ever now i know the height id like i can either get somthing made up or come up with another solution , becuase ATM where the spring its self is so short they come away from the mounting points on A arm extention...which no one likes to see! :o
-
cant seem to inbed my vid here so have a look at this link.
http://www.facebook.com/photo.php?v=10151281668348842&set=vb.500443841&type=2&theater
-
Had my hammer out again! Wishbones AND shocks are now here and im pleased to say they seem to line up to one another quite nicely, just a case of modding little red a little to accept them in the way id like it too. Can't exactly judge much untill i get the wishbones mounted to the car , and for that i need to fit the smaller tyres i have so i can get the bloody wheels in the arches *sigh* If...big if, the weather lets up a bit in the evenings, ill crack on with the cutting/welding a bit and show you what im doing, untill then im working in the wet/dark for a few hours at a time *shivvers*
-
any pics on this setup :P
-
(http://sphotos-h.ak.fbcdn.net/hphotos-ak-ash3/857279_10151355008048842_1170596225_o.jpg)
(http://sphotos-b.ak.fbcdn.net/hphotos-ak-frc1/860619_10151355008078842_1311842430_o.jpg)
???
-
More details!
-
:o
damned weather!
Iv been busy non-the-less, fronts no where near as finished as i want at this point, and iv no got my tyres fitted yet so i cant finalise anything which annoys me but,...well make your mind up i like it...
Look at all the f****s i give 8)
(http://sphotos-c.ak.fbcdn.net/hphotos-ak-frc1/883651_10151406160468842_2097823024_o.jpg)
(http://sphotos-b.ak.fbcdn.net/hphotos-ak-prn1/882734_10151408310003842_1229427309_o.jpg)
(http://sphotos-c.ak.fbcdn.net/hphotos-ak-frc1/901763_10151408303843842_1208907947_o.jpg)
(http://sphotos-g.ak.fbcdn.net/hphotos-ak-frc1/902229_10151410951108842_1039841119_o.jpg)
(http://sphotos-a.ak.fbcdn.net/hphotos-ak-prn1/905260_10151426551678842_417299950_o.jpg)
(http://sphotos-g.ak.fbcdn.net/hphotos-ak-frc1/902487_10151426548303842_2053965486_o.jpg)
-
what are those steels off of? Are they 14's? I like them.
Marc
-
13"s from a vw bora - the tyres on them are way too big atm but yeh i realy like the wheels so their staying
-
(http://sphotos-d.ak.fbcdn.net/hphotos-ak-frc1/906717_10151438969103842_2110805077_o.jpg)
-
More pics!
Baz, would you be so kind and tell us exactly what you've done to the suspension? Ill be lowering mine soon :)
-
???
fronts not finished yet...and theres not alot of metal or spring left on the rear :$
Iv slotted the frame at the back for more clearence (rear - welded a inverted box in where there used to be a lump ) and at the front iv welded up some mounts.
extended chassis forward and down then welded up points to bolt wishbones to which i got from a quad bike, Iv also bitted another cross memeber to brace them as well as a top strut brace. Once i worked out the lengths iv lowered the car at the front to see where the coilovers (also from a quad) will need to sit and that made up mounts for the shocks to sit. The bottom of the shocks dont sit at the top of the wheel hub carrier on my car anymore, they are mounted behind it with my own custom mounts made from 4mm steel and bolted to the carrier. Been alot of work and needs alot ofgrinding back and tidying up in places ( hence no photos as im quite embarrised by it atm. The drivers side it almost complete bar one of two more bits of bracing and the passenger side isnt far behind.
The front will come down another inch or so by the time im done.
(http://sphotos-h.ak.fbcdn.net/hphotos-ak-ash3/537192_10151438974373842_1460875982_n.jpg)(http://sphotos-b.ak.fbcdn.net/hphotos-ak-prn1/71491_10151438973253842_1053790541_n.jpg)
As you can see - the passenger side wishbone i orignaly made was toooo long lol :) Iv solved that on the drivers side and need to go back over it - hours work at most.
Iv got 4 more holes to weld in the floor when thats done, a cracked brake line, then fit no'plate lamp at the back , adjust handbrake, spray the inside, and buy a hub for my wheel , other then that little list shes ready to rock ( will probably fit a big shiney chrome bike can out back and make some polly mounts for the gearbox as im not happy how much it all moves! )
...then buy a VFR engine ::)
-
oh yeh and its got one 145 tyre and 3 175 tyres on at the moment , hence it looking rather wird lol
-
This is great stuff!! :thumbup
...then buy a VFR engine ::)
Looking for a VFR engine? :secret:...
(http://farm9.staticflickr.com/8106/8659114292_1c7bd4cfde_c.jpg)
-
Some top work there mate! I'm a big fan! Can't wait to see the finished article and hopefully some pics of the set up in the neat future :thumbup
-
Oooo
Sent from my moblie with my thummy wummys.
-
tum ti tum , ill just leave this here....
(https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-frc1/902691_10151444729963842_306558203_o.jpg)
-
8)
(https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-ash4/415358_10151448083843842_1336738975_o.jpg)
Almost happy that i can show you guys some photos of the underneath....assuming i can get the jack in/out ;D