Club126UK
Fiat 126 Chat => Fiat 126 Chat => Topic started by: sam126 on December 12, 2012, 11:17:28 PM
-
Hi does anyone know if these are too wide to fit in the arches of my aircooled ?
http://www.minisport.com/mini-spare-parts/Revolution_Black_5___x_12___Wheel.html
-
It`s not a straight fit as the PCD on the Mini wheels is different to Fiat(4x98).
I can`t remember what the Mini is, but if it`s 4x100 you can probably get them fitted with some "wobbly" bolts.
The size itself shouldn`t be a problem, but it depends on the offset of the wheels.
There are some easier alternatives and you probably be better of going for a Fiat fitment.
-
Yh i think the mini wheels are 4x100 so i was going to use wobble bolts, as for fiat wheels struggling to find a nice set of alloys i like :(
-
Have a look at this?
http://www.ebay.co.uk/itm/271070980073?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
-
Yh i think the mini wheels are 4x100 so i was going to use wobble bolts, as for fiat wheels struggling to find a nice set of alloys i like :(
mini pcd is 101.something and anything over 2mm is too much for wobblies I'm afraid... you may haave to look elsewhere...
-
I wanted those wheels a while ago but the stud pattern on my 126 is 4x98 so they wont fit :( daym! have you tried putting mini wheels on then with wobble bolts?
-
I am selling these alloys. Let me know if you are interested.
-
Mini wheels will not fit safely with wobble bolts, if at all.
-
The Fiat x1/9 O.Z`s look great on the 126 and they do come up on eBay time to time.
Like this.
http://www.ebay.co.uk/itm/Fiat-X1-9-X1-9-Grand-Finale-Alloy-Wheels-Set-of-4-Used-/300830782626?pt=UK_CarParts_Acc_Wheels_tyres_Trims_Car_Rims_ET&hash=item460ae974a2
Even better some classic Cromodoras. They are nice and light and will never loose they value as long as you can find a straight set.
-
How much would you be looking for for those wheels? will they fit straight on ?
-
Those ones in the link haven`t sold(they aren`t mine), so you might be able to make a cheeky outside eBay offer on them.
Just check with the seller if they are 6j as in he states in his listing as in this case they will be to big. The ones I`ve seen before were 5 or 5,5J which should be all right.
This car had the same wheels fitted, just to give you an idea of how they look on a 126.
I think you`ll need some slightly longer wheel bolts.
http://club126uk.co.uk/smf/index.php?topic=6518.0
-
Cromodora Abarth alloys that will fit 126s but will need a lot of tlc.
http://www.ebay.co.uk/itm/CROMODORA-ABARTH-CD30-RIMS-FIAT-500-600-124-131-mirafiori-850-127-126-X1-9-X19-/170951240833?pt=UK_CarParts_Acc_Wheels_tyres_Trims_Car_Rims_ET&hash=item27cd7cec81
-
NB!!! 3,9kg ;) Lighter than the original 4J12.
-
so those Cromodora alloys will fit straight on to my air cooled with out any modifications to the arches?
-
How much would you be looking for for those wheels? will they fit straight on ?
Make me an offer!
-
are they real minilites or replicas ?
-
I think they are replicas, but not I am not sure. These are 12 inches in diameter. The alloys will come with tires which are in relatively good condition. I bought the car with the alloys installed. I have opted replace the minilites and recently bought Cinquecento Sporting 13 inch alloys, so this set is surplus to requirements.
-
well i would offer you £100? but also liking the look of those Cromodora CD30s if they fit
-
Those Cromodoras are in Greece with a postage cost of £180 ;D
-
yh i know :( to pricey for me!! so might go for the Cromodora CD30 replicas but what i really need to know is will they fit!!!! before i spend all that money back and front??
-
I never seen them fitted to a 126, so can`t say for sure.
Here is how they look on a 127.
http://www.flickr.com/photos/18205248@N07/3892478904/in/photostream
Have you found some replicas then?
-
yh seen that picture before they look cool, personally i think they will look awesome on a 126!! :D and yh i have seen a few, still quite expenisve tho but still wont cost as much as those original Cromodoras because they are gunna have to be restored aswell as buying them and that £180 p&p!!!
http://www.ebay.it/itm/Fiat-Alfa-Romeo-5-5x13-4x98-ET7-TUV-Cromodora-CD30-Cerchi-Alufelgen-approval-TUV-/221166051786?pt=Ricambi_automobili&hash=item337e8621ca
-
Nice wheels Sam ;D but too expensive, Just keep an eye out on greedybay they will turn up eventually :D
-
They look so good!! i want them :( thats a bis tho isnt it so they can take the bigger wheels? or are the arches the same on the aircooled?
-
well i would offer you £100? but also liking the look of those Cromodora CD30s if they fit
Just one thing. The set of alloys does not include the wheel bolts. Is that fine with you?
-
yh thats fine, am i gunna need to get wobble bolts to fit them or will the original bolts hold them on? also are the wheels in good nick and tyres road legal ?
-
There is a lot of thread left. It looks in good nick. There are some minor cracks. It will probably okay for short distances. Probably best to replace the tires but it is your choice.
-
ok sounds good to me :) where abouts you based in london? because im actually coming up to london on boxing day
-
The set of alloys is at my friend's Alfa Romeo garage. I'll be at the garage this weekend, so will try to get them removed them from the car. I'll keep you posted.
-
ok cheers :thumbup
-
any news on those wheels ?
-
Apologies. I've busy at work and then doing some last minute shopping. Just went to the garage yesterday to drop off some presents for the mechanics and completely forgot about the alloys. I am not sure whether the garage is open on Monday, the 24th. I will try to ring them. Please accept my apologies. Hopefully, I can get someone, or I will remove the alloys myself, that is, if it is accessible.
-
No worries, will sort it out in the new year, heres my number 07775743588 just drop me a text when the wheels are off the car :)