Club126UK

Fiat 500 Chat => Fiat 500 Chat => Topic started by: philjones on March 14, 2006, 11:38:15 AM

Title: Remove oil filler cap
Post by: philjones on March 14, 2006, 11:38:15 AM
Here's a suitably naive question from a new Fiat 500 (126 engine) owner  :oops:.  The oil filler cap turns (marginally) but does not seem to want to come off.  What am I missing? :???:

Thanks
Title: Remove oil filler cap
Post by: paul harbinson. on March 15, 2006, 07:50:39 AM
An extra shreaded wheat :lol: Use a bit of elbow grease,they can be tight (that's what you want anyway).
Title: Remove oil filler cap
Post by: Chris Lakin on March 15, 2006, 02:29:59 PM
hi Phil, welcome to the forum, ive never had this problem myself, i think ive heard of someone else though. There quite nasty things to grip with your hand, you could try heating it up to expand the metal i supose? but i think paul is right.

regards  :lol:

Chris
Title: Remove oil filler cap
Post by: 126dave on March 15, 2006, 07:41:44 PM
yep,paul's right,they are tight to come off,they are even worse on after market alloy valve covers...........
Title: Remove oil filler cap
Post by: PaulB on March 15, 2006, 10:58:58 PM
I wouldn't heat it - it might ruin the seal and will probably not help. Try pushing down hard when turning to compress the seal and help the lugs on the cap get past the flanges on the filler neck. Regular use will make it looser.
Title: Remove oil filler cap
Post by: paul harbinson. on March 16, 2006, 07:40:02 AM
Another tip Phil is extra leverage,I would use an oil filter remover (the type with long handle's and look like plier's).I use them every day to take the expansion bottle cap's off the Jag's(they can be as tight as two coat's of paint).
Title: Remove oil filler cap
Post by: gregs656 on March 16, 2006, 09:12:12 PM
pair of mole grips and a hammer