Club126UK
Fiat 126 Chat => Fiat 126 Chat => Topic started by: Emin on June 09, 2012, 08:45:24 PM
-
Hi mates,
I am in the final decision process of buying an aircooled 126. Funding will be hard, explaining to wife is much harder but we'll see.
The car appears to be in good nick and to be cared for. The only thing stops me is that i have to drive it nearly 300 miles to bring it home. The owner says with breaks every 60 r so miles it would make it. Tinkering with this i remembered the engine lid may be kept open during the journey using VW-fashioned lid spacer thingy to run cooler and need lesser breaks. Anyone had experience?
-
Emin I drove 470 miles from Glasgow to Dover with only 1 or 2 stops and had no problems with over heating. It is common on the Continent for 500's and 126's to have the boot lid open to aid cooling this is mainly for the modified ABARTH type cars.
Ralph
-
Many Many 126 have been driven from Poland to the UK with no problems. there is a devise made to keep the boot open, personally I don,t know if it makes a lot of difference. One member drove from Kent to Northampton with no boot lid at all, then stripped the engine down in a field to check the cam. ;D
-
Many thanks!.. The owner looks erratic about the price and wifey is not happy. I have some more hours to think. We'l see.
-
no!!! dont open hood!!!
-
and drove home on one cylinder!!
-
and drove home on one cylinder!!
;D ;D ;D ;D
-
I think i'll wait for the sale season to end, then look for a car closer but a bit more expensive. The adventure would worth it anyway.
-
when open hood you are change reculkulation of air... and this is worst....
-
when open hood you are change reculkulation of air... and this is worst....
Have you tried it before? I think VW-type gaitor would look cool.
-
ni I didnt try but iwas read few newspaper article in polish papers and everyone say dont open....
-
ni I didnt try but iwas read few newspaper article in polish papers and everyone say dont open....
I'll keep in mind. Thank you mate.
-
How can keeping the lid open be bad? Surely the more exposure to air, the better the cooling process is, therefore making the engine run more efficient?
-
The way i understand it is by keeping the engine lid open while the engines is running, the fan is pulling air from the back and the LHS of the engine bay, By closing the lid the airflow's through the vents in the lid but also across the engine compartment cooling the carb, exhaust and other ancillaries on the way. If it was necessary to make the vents bigger due to overheating problems they would have designed larger vents in the back panel. Once the engine has stopped running it would be OK to to open the lid a little to help dissipate the heat quicker :)
-
In my opinion it's good to be open only in a traffic jam or let's say in town at low speed.
When the speed is higher the out coming hot air would struggle with the turbulence. Well, the open lid will make the car less aerodynamic (hm, "less", is that possible in our case).
At high speed behind the car there is plenty of vacuum that pulls out the hot air trough the vents.
Maybe the optimal upgrade is to open the upper half like that:
-
Found the pic below.
Also found the correct name for the thing: standoff.
It seems vw scene has no common decision if it's good or not. For me it looks cool anyway. :)
-
In my opinion it's good to be open only in a traffic jam or let's say in town at low speed.
When the speed is higher the out coming hot air would struggle with the turbulence. Well, the open lid will make the car less aerodynamic (hm, "less", is that possible in our case).
At high speed behind the car there is plenty of vacuum that pulls out the hot air trough the vents.
Maybe the optimal upgrade is to open the upper half like that:
I have noticed this in my Bis, at err high speed the car is much cooled but in traffic and driving round toen it heats up much quicker. I can drive the half an hour to work and the rad fan never cuts in but if I drive round town it comes on within 15 mins!
-
In fact the beetle got a bit different hot air escape - the fan blows it beneath the car.
(http://upload.wikimedia.org/wikipedia/commons/thumb/7/72/K%C3%A4ferk%C3%BChlung.svg/420px-K%C3%A4ferk%C3%BChlung.svg.png)
Porsche 911 Turbo also has it's secrets (http://www.wired.com/cars/coolwheels/news/2007/09/porsche911_review) :$
Temperatures inside the cabriolet’s variable-turbine geometry engine approach 1,000 degrees Celsius. For the engine to handle such extreme temperatures, Porsche says it has tweaked it material composites for enhanced heat resistance, while bolstering radiator cooling with a combination water- and air-cooling system. At speeds of 186 mph, the air-intake vents feed about 4,000 liters of air per second through the heat exchangers for the radiator. Engineers have housed a fan directly above the engine in the back for additional active cooling.
(https://w48.dlsaccelerator.com/webasp/uploads/carimages/721488_840870.jpg)
Well, in the A/C 126 the only right way to go is the oil cooler with thermostat and an electric fan. Also bigger oil sump. That's something already commented around. :)
Greetings!
-
Anyone else having visions of a 126 with a 911 whale tail spoiler? :D lol
-
(http://i7.photobucket.com/albums/y284/dajwid/spoliler1.jpg)
Corrrrr !!!! Super Cool. Who cares about the cooling, I bet this baby handles better now.
-
Sure, because of the extra weight over traction wheels. I guess it dissipates heat via dual exhaust pipes which means even better performance.
-
Sometimes my sarcasm is simply wasted ;D
-
it looks like a baby carriage with three handles!!!
-
Well. I asked a friend of mine, who is running his bug with the lid open and he said that it has a great effect. Now in BG is about 35*C and the engine maintains 95*C. When closed ... 115*C oil temperature. Also said that the air gets into the engine bay. Then I felt a bit suspicious about the 20* improvement, and found how the air comes from outside to the turbine... So, completely different story...
You can see on top of the engine room the vents:
(http://www.volksworld.com/imageBank/i/IMG_1789.jpg)
And how the cool air enters the turbine... straight form the engine room:
(http://www.modifiedcars.com/gallery/2009/VolksWorld_Show/11.jpg)
Conclusion! The bug style doesn't work in 500/126 case. We need the warm air to run out, not to put cool air in the engine bay ;)
Some more ideas. Also Porsche 911 Turbo style for low flying airplanes hihihihi :P
-
I think it's the exhaust that produces a lot of excess heat, so I will be putting exhaust wrap on mine once I get to the stage of fitting the sports exhaust, will reduce heat in the engine bay and increase heat in the exhaust itself wich leads to a better flow of exhaust gasses and an increase in performance.
-
hmmm I feel a science experiment coming on.....
-
I don't know much about it myself, but I can tell you two things from experience with the Italians/Sicilians.
1. My wife's '72 500L had the lid opened up like the Abarths and the locals liked it. "Va bene."
2. I tried it with my 126 and the locals looked at me like I was an idiot. "No bono."
I'm not very good at taking hints, but I'm guessing my lid will stay in the "down" position.
I am interested in an electric fan to help push out the hot air, if anybody has a link?
-
Has anyone had overheating problems with a standard aircooled ?
-
never....
-
I have not heard of any apart from very highly tuned engines.
-
Me neither. ;)
I've never had a 126. Second hand car prices have been sky-high during summer so i won't have overheating problems when i buy a 126. :(
-
;)
-
The group 2 rally cars never had the lid open, they would have if it helped
-
Not needed doesn't mean not better. :) They were to lazy to cut the upper half :P If in 500 it's way better what's the difference in 126!? Easy to prove with an accurate oil temperature gauge. If you gain 5*C less - that's good enough. Let say if running at 60mph for long. The normal is 90-110*C, critical 120*C. The oil cooler makes about 20*C lower temperature.
This is the Gr2 replica. It's a bit strange if we got the air filter like this and the lid closed... (David Vizard would say "not good") ;D So, not everything we see is the best.
(https://sites.google.com/site/sherif063/_/rsrc/1257103483249/PhotoEnginecompleteLrez-custom-size-644-483.jpg)
For rally the open hood means mess in the engine room, maybe a good reason to keep it closed.
-
Surely on the car shown, having the missing heat shield in place and wrapping the exhuast would have more effect.
We have a saying " If it ain't broke , don't fix it " ;)
-
Improvements on the cheap are always welcome. Wrapping the exhaust sounds promising for instance. When i buy a 126 i will be looking for ways of improving airflow and other means to stretch dhe distance between cooling breaks. Everyone here says every 100 to 200kms car needs a break to cool some. Maybe it's due to climate here or bad maintenance. I've had lots of food for thought here in this topic.
-
You could always fit an oil cooler. Not sure how, but someone will know, they normally come off of the oil filter mounting, but the 126 doesn't have that type of oil filter.
You might be best asking smallcox, the guy is a 126 genius.
-
When i lay my hands on an oilpan i'll try to figure out a way to fit some aluminium cooler which is commonly used for electronic amplifiers etc. If the base of the oil pan is straight or can be straightened or there is sufficiently large straight area it may work. İmporting ready-made one is out of sight for now.
There is also another saying there: first thing first. Need to buy a 126.
Thanks for all input. :)
-
Reading this has opened my eyes as to why my 500 died. :o I was unaware these engines needed a cooldown period after a while. I tried going from New Orleans to Pensacola (4 hours at 70-75mph) in one shot not even thinking about this. In front engine cars, keeping the air flow is paramount. In the rear engines, you don't have that same amount. Good thing this didn't happen to both my cars... Thanks for the eye opener!
-
4h at 75... :o you must be jokin :$ 75mph/120kmh is a good topspeed, but... 65mph/105kmh is pretty OK and that's why the factory rates it as a max. speed at 4800 rpm (a little bit more than the max.power at 4500rpm).
They say: permanent speed of 90kmh/56mph is not a problem for the 126, in spite of the small engine...
Also: you can shift gears at 5300-5600rpm when accelerating...
Well, 5500rpm is kind of ceiling or about 75mph/120kmh, but have mercy ??? 8)
Something more, you say 500... All models except 500R (8/39 like in 126 all models incl. 600cc) got final drive 8/41. Imagine the rpm at 75mph/120kmh if it can reach em at all, no matter what the clock says.
"Cooling down period" means that we are tormenting the machine or something inside is going wrong - bad mixture, ignition, oil, belt, thermostat... Climbing mountain road at high gear and low rpm... So what means to stop every 50-100-200km, and how to know when exactly? This is good only for the tin in the engine room, so the rubber gasket of the rear window doesn't convert to a bubble gum :$ Insulating the engine bay is also a good step, cos in a certain moment the walls are just a heat accumulator... ;) That's how the whole theme started - the open lid :)
Emin, the oil pan is air-cooled as well :) So no alu-radiators will be worth. Well, here is good to say that is good to make sure that the gap in the bottom of the sump is clean and not filled of oil-dusty mess or smashed... Bigger displacement 3.5-4l aluminum pan is other thing.
Have fun, guys! :beer: