Club126UK
Fiat 126 Chat => Fiat 126 Chat => Topic started by: fei on May 18, 2012, 08:54:06 PM
-
Hi the rubber is coming off the wiper blades and are going to ruin the windscreen
GOne through the old threads apparently mini ones might fit? but they are 10" and not for LHD ??? ???
FIAT 500 ones look similar but much shorter, do I need 12" to be perfect?
Ideally i want a pair same as that on the car it reads "Made in Hungary 3E" if it means anything...
Please help!
Will these works?http://www.ricambio.co.uk/295-wiper-blade-x2--chrome
(http://uk.mg6.mail.yahoo.com/ya/download?mid=2_0_0_1_13685972_AEHci2IAAMSqT7alJwxK3j%2BHzJk&pid=2&fid=Inbox&inline=1)
(http://i111.photobucket.com/albums/n123/KINWOLEE/Fiat%20126/securedownload.jpg)
-
(http://uk.mg6.mail.yahoo.com/ya/download?mid=2_0_0_1_13686660_AJHci2IAAGEPT7arCggHF1i3Hwg&pid=2&fid=Inbox&inline=1)
-
My Bis wipers use 13" size wiper blades.
-
go down to halfords and buy the replacement blades they just slip on and if they are too long trim them or even easier pay for a halfords bod to do it for you.
-
go down to halfords and buy the replacement blades they just slip on and if they are too long trim them or even easier pay for a halfords bod to do it for you.
Yeah you can just buy the rubber bit and replace :D
-
I sometimes think that I'm an engineer ;D
-
go down to halfords and buy the replacement blades they just slip on and if they are too long trim them or even easier pay for a halfords bod to do it for you.
Yeah you can just buy the rubber bit and replace :D
Oh right do you mean take the rubber bit out and fit onto the original metal blade?
-
yep
-
go down to halfords and buy the replacement blades they just slip on and if they are too long trim them or even easier pay for a halfords bod to do it for you.
If you can take the arm in with you, there is at least one size that is twice the length of the 126 ones. slice to size with a stanley knife then you get 4 blades rather than 2.
-
If you can take the arm in with you, there is at least one size that is twice the length of the 126 ones. slice to size with a stanley knife then you get 4 blades rather than 2.
Spoken like a True Scotsman Micheal ;D
-
hard times. and all you need to save.....
-
ha ha!!
you can take the boy out of scotland, but you can't take scotland out of the boy!
-
go down to halfords and buy the replacement blades they just slip on and if they are too long trim them or even easier pay for a halfords bod to do it for you.
If you can take the arm in with you, there is at least one size that is twice the length of the 126 ones. slice to size with a stanley knife then you get 4 blades rather than 2.
LOL!!
I managed to got a pair of universal 13" off ebay for £1.99 and replaced the rubber onto the old blade!
Thanks!