Club126UK
Fiat 126 Chat => Fiat 126 Chat => Topic started by: nrg19uk on January 30, 2012, 07:46:44 AM
-
Looks like a worth while investment rather than those crappy aluminium blocks looks easy to fit
http://www.motomax.pl/eng/index.html
Ricambio sell them for £55 I think that's each.
Here's the fitting distructions
http://www.motomax.pl/eng/fiat126/instr_126p/instr_126_eng.html
-
They look like a good idea, and I was also thinking about these couplings on the CCZero.
The 126Fan guys sell the whole kit now for 130 Euros.
http://www.126fan.sk/eshop/index.php?main_page=product_info&cPath=10_25&products_id=780
-
I fitted them to my Gamine after replacing 3 on a round trip to Garlenda 3000 miles. Had trouble fitting to one side, had to drop the swing arm, but have had no problems since. You can also get them for the output shaft from the gearbox. I bought mine direct from the factory.
Ralph
-
Puddle jumper you kept that quite any mods that can help out surely should be advertised! :P where's the direct link from the factory?
-
Here: http://motomax.pl/eng/index.html
The units are 91 euro plus postage, if you go to ebay italy or Germany they come up regularly. The postage from Italy is generally cheaper. The first photo shows the tri housing unit attached to the stub axle nyloc nut on in reverse. The second shows the problem I had, look at the previous post showing the installation for the difference. I know of other fitted to 500's which were straight forward.
Ralph