Club126UK

Fiat 126 Chat => Fiat 126 Mechanical Problem Solving => Topic started by: 126redbomb on January 02, 2012, 11:22:41 PM

Title: bis thermostat
Post by: 126redbomb on January 02, 2012, 11:22:41 PM

Happy New Year to all. 
I want to change the thermostat on my bis but I need to know if it only come as a complete unit or can I buy just thermostat. I think mine hasnt been changed for quite sometime and Im not to sure if its working properly ( it could have a blockage).  Does anyone know where to buy one from.

Title: Re: bis thermostat
Post by: jokke on January 04, 2012, 03:43:19 PM

https://webshop.fiat500126.com/index.php/katalog/artikelinfo/2800-1-thermostat_repair_kit.html

http://www.ricambio.co.uk/133-thermostat--fiat-126-

Title: Re: bis thermostat
Post by: 126redbomb on January 04, 2012, 04:14:24 PM

Cheers for that.
 I think I need to test the thermostat and probably do a compression test.  I just hope the head gasket hasn't gone.

Title: Re: bis thermostat
Post by: ChrisRLewis on January 04, 2012, 04:57:13 PM

Most Bis owners remove the thermostat completely, the thermostat can cause problems due to poor design, that's what I have been told. ::)

Title: Re: bis thermostat
Post by: Darrell on January 06, 2012, 04:37:19 PM

Take it out before is sticks and ends up making tea  :P

Title: Re: bis thermostat
Post by: Hazey-n-Marc on January 06, 2012, 05:44:27 PM

I recently bought a thermostat and housing off of the internet for about twelve quid all in. needed a small bit of filing to make it fit as the shoulders holding the thermostat in place were a bit too proud, fine otherwise.

Marc

Title: Re: bis thermostat
Post by: 126redbomb on January 06, 2012, 10:05:35 PM

I've been looking everywhere on the net and 40+ quid is the best I can find, so £12 is WOW.  This might sound really thick but what do I need to do to plug the hole of the thermostat. :$ :D

Title: Re: bis thermostat
Post by: Hazey-n-Marc on January 06, 2012, 10:21:52 PM

Ebay, will try to find where, the box is still about somewhere. It is a complete unit, think you would have to
break the thermostat to remove it from the housing (not 100 percent on this).
Not sure why or which hole you want to block

Marc

Title: Re: bis thermostat
Post by: 126redbomb on January 07, 2012, 08:31:44 AM

Sorry about the hole! It was late last night when I asked the question, after doing nights and having no sleep from the thursday my head was in a fog. ::)
 So I just have to pull the old thermo out of the housing?
Thanks for having a look for the box H n M, if you can get back to me that would be great.

Title: Re: bis thermostat
Post by: Amateb8 on January 07, 2012, 08:42:30 AM

There has been a lot of debate regarding to retain or remove the thermostat. I have kept mine. As long as the cooling system is regularly maintained, the current set up should be fine. If it takes a while for the engine to warm-up, then the thermostat needs looking at.

The thermostat allows the engine to warm-up quickly reaching its operating temp before allowing the coolant to flow through. By letting the engine warm up as quickly as possible, the thermostat reduces engine wear, deposits and emissions.

Title: Re: bis thermostat
Post by: Hazey-n-Marc on January 07, 2012, 09:53:16 AM

found the box, but only has minimal address on it, willtry to find out more.

Marc

Title: Re: bis thermostat
Post by: Hazey-n-Marc on January 07, 2012, 11:16:07 AM

http://www.1asiandirectory.co.uk/FIRELA_MOTORS-354-356-CLAPHAM-ROAD-LONDON-LONDON-SW9-9AR-UNITED-KINGDOM-p-323035.html

This is who is registered at that address.

Marc

Title: Re: bis thermostat
Post by: Darrell on January 18, 2012, 12:51:34 PM

On average a BIS does like 30000 miles before dying in a cloud of steam.

Get rid of the thermostat, you have been warned 8)