Club126UK
Fiat 126 Chat => Your Restorations => Topic started by: MeelisV on November 24, 2011, 07:23:13 PM
-
Hi
I´m Meelis and from Estonia - that is the first note - my language is´nt english
But story is next:
once there was friend with another friend and idea "lets bring car for another friend as a birthday gift"
(no one there wasnt me - yet)
once when friend were in Poland they had one more idea - lets buy one car more - then they had someone else in mind - yes it was me in their mind.
first there was SMS with pic. in that time i didnt know that there was my car
(http://img577.imageshack.us/img577/9238/pilt0057.jpg) (http://imageshack.us/photo/my-images/577/pilt0057.jpg/)
next time car was in here (the lighter colored car was birthday gift)
my car is Polski Fiat from 1997 and 650 AC engine
(http://img694.imageshack.us/img694/6770/20111024093055.jpg) (http://imageshack.us/photo/my-images/694/20111024093055.jpg/)
although from outside the car is almost OK
but under the car there is horror - whole floor is only rust and not only floor
(http://img39.imageshack.us/img39/1453/20111104093914.jpg) (http://imageshack.us/photo/my-images/39/20111104093914.jpg/)
first boughten thing was Haynes Owners workshop manual
next faund rims not 4x98 but 4x100 and not 12" but 13" they need work but its not problem
(http://pilt.delfi.ee/show.php?mode=2&id=13193279&salt=oqQoq7.jpeg)
first real part for car i receive was both side sill´s inside and outside
(http://pilt.delfi.ee/show.php?mode=2&id=13193281&salt=bVkcIw.jpeg)
from ricambi there is order for full floor panel and mounting plate for front spring
and from 126fan.sk there is order waiting for many parts ander the car - front and rear axle parts, steering parts and ...
lets see how its going next
there is work to do, parts for order and waiting.
edit: made pics smaller
for bigger pics look in my album http://pilt.delfi.ee/album/226675/
-
Good luck with the restoration, lets keep these lil 126s alive!!
marc
-
today we replaced one sill
new sill´s from Poland dont fit 100% - need to cut/bend/hammer and then they will
(http://img151.imageshack.us/img151/8487/20111126145327.jpg) (http://imageshack.us/photo/my-images/151/20111126145327.jpg/)
(http://img828.imageshack.us/img828/8707/20111126160128.jpg) (http://imageshack.us/photo/my-images/828/20111126160128.jpg/)
(http://img405.imageshack.us/img405/6463/20111126162928.jpg) (http://imageshack.us/photo/my-images/405/20111126162928.jpg/)
(http://img259.imageshack.us/img259/9330/20111126171925.jpg) (http://imageshack.us/photo/my-images/259/20111126171925.jpg/)
(http://img444.imageshack.us/img444/7047/20111126184738.jpg) (http://imageshack.us/photo/my-images/444/20111126184738.jpg/)
(http://img814.imageshack.us/img814/1782/20111126192012.jpg) (http://imageshack.us/photo/my-images/814/20111126192012.jpg/)
(http://img580.imageshack.us/img580/4820/20111126191945.jpg) (http://imageshack.us/photo/my-images/580/20111126191945.jpg/)
edit: made pics smaller
for bigger pics look in my album http://pilt.delfi.ee/album/226675/
-
Nice work :)
-
Rims got sandblasted
(http://img267.imageshack.us/img267/6476/20111130105647.jpg) (http://imageshack.us/photo/my-images/267/20111130105647.jpg/)
rims are so called phonedials and made by ATS in Germany
-
and powdercoated
(http://img24.imageshack.us/img24/9950/20111201132933.jpg) (http://imageshack.us/photo/my-images/24/20111201132933.jpg/)
(http://img27.imageshack.us/img27/3092/20111201132943.jpg) (http://imageshack.us/photo/my-images/27/20111201132943.jpg/)
(http://img7.imageshack.us/img7/3504/20111201132954.jpg) (http://imageshack.us/photo/my-images/7/20111201132954.jpg/)
-
New pics in album
now car is turning/rolling and we can weld under the floor
removed all parts in front axle
(http://pilt.delfi.ee/show.php?mode=0&id=13224707&salt=Ltqb0D.jpeg)
-
ordered some parts from 126fan.sk
(http://pilt.delfi.ee/show.php?mode=0&id=13282015&salt=QALsRs.jpeg)
there is
4 x brake bleed nipples
2 x brake cylinder front - new model
2 x brake cylinder rear - new model
2 x Brake shoes new model
2 x front brake hose
2 x rear brake hose
1 x rear brake shield L NT
1 x rear brake shield P NT
1 x plate of front stop right
1 x front shock absorbers- one pair
1 x rear arm left
1 x rear arm right
1 x rear shock absorbers - one pair
2 x rubber of suspension pen
2 x stop of front wheel
1 x vertical pins - set
2 x ball pin internal long
2 x ball pin outer short
1 x middle of steering
2 x set of bearings - rear wheel
-
That list does look familiar... (for when I repaired mine ;D)
-
today recived second package
there was
(http://www.fiat500ricambi.be/beheer/fotos2/PW1146_normaal.jpg) (http://www.fiat500ricambi.be/beheer/fotos2/PW1076_normaal.jpg)
(http://www.fiat500ricambi.be/beheer/fotos2/PW1016_normaal.jpg) (http://www.fiat500ricambi.be/beheer/fotos2/PW1015_normaal.jpg)
Now there ise few days for christmas and new year celebrations and then starts big welding job 8)
-
new year and new parts THANKS for 126Fan - nice when there is someone who helps and give you some gifts too :D
(http://pilt.delfi.ee/show.php?mode=0&id=13339647&salt=nYvIwP.jpeg)
there was more - 4 tyres 165/55R13
(http://pilt.delfi.ee/show.php?mode=0&id=13339661&salt=1Hkk1w.jpeg)
and some bling-bling from "126Fan"
(http://pilt.delfi.ee/show.php?mode=0&id=13339685&salt=BjPgw5.jpeg)
And car is upside-down :P
(http://pilt.delfi.ee/show.php?mode=0&id=13338925&salt=Bgcj6c.jpeg)
-
Fantastic restoration work!! I can't wait to see the finished product. Nice alloys too!!
-
got finaly wobble bolts
(http://pilt.delfi.ee/show.php?mode=0&id=13352027&salt=NQOxDt.jpeg)
and painted the engine parts
(http://pilt.delfi.ee/show.php?mode=0&id=13352459&salt=2Vpk5H.jpeg)
-
modified for rims inside dimension 57,1 mm
(http://pilt.delfi.ee/show.php?mode=0&id=13355477&salt=Yx7QO5.jpeg)
-
today replaced floor-panel.
more pics in album 3. and 4. page
http://pilt.delfi.ee/album/226675/?page=3
First cut
(http://pilt.delfi.ee/show.php?mode=0&id=13361123&salt=dqTjw9.jpeg)
bad corner
(http://pilt.delfi.ee/show.php?mode=0&id=13361127&salt=wEt09W.jpeg)
(http://pilt.delfi.ee/show.php?mode=0&id=13361133&salt=MWJB9l.jpeg)
second cut
(http://pilt.delfi.ee/show.php?mode=0&id=13361135&salt=9o9oAr.jpeg)
first fit
(http://pilt.delfi.ee/show.php?mode=0&id=13361145&salt=aWPhaf.jpeg)
ready for floor
(http://pilt.delfi.ee/show.php?mode=0&id=13361159&salt=uO1QID.jpeg)
OOPS
(http://pilt.delfi.ee/show.php?mode=0&id=13361163&salt=ahqtDv.jpeg)
floor welded
(http://pilt.delfi.ee/show.php?mode=0&id=13361173&salt=hcPBYi.jpeg)
-
now there past some time
new parts from 126fan.sk
(http://img32.imageshack.us/img32/294/20120201131302.jpg) (http://imageshack.us/photo/my-images/32/20120201131302.jpg/)
and inside warm room killed some time
cant work with body because garage is without heater and we have here -20...-29C
and in weekend they say that -35c can be aswell.
(http://img215.imageshack.us/img215/9317/20120203131143.jpg) (http://imageshack.us/photo/my-images/215/20120203131143.jpg/)
new piston rings and big end bearings
(http://img198.imageshack.us/img198/7598/20120203112725.jpg) (http://imageshack.us/photo/my-images/198/20120203112725.jpg/)
-
:o -35 deg. cel. . -15 and -20 was cold (brrrr i remember those winter nights :) )
You really are going to have a new 'old' car when you finish :)
-
FAB - I wish I could weld!
-
engine is coming together
(http://img198.imageshack.us/img198/1699/20120204212128.jpg) (http://imageshack.us/photo/my-images/198/20120204212128.jpg/)
(http://img829.imageshack.us/img829/3040/20120204212102.jpg) (http://imageshack.us/photo/my-images/829/20120204212102.jpg/)
and yes we have cold here - in my town we had two nights -27C but ~100...150 km away(to south) there was -35C.
-
after some
cuting
(http://img197.imageshack.us/img197/4711/20120205165535.jpg) (http://imageshack.us/photo/my-images/197/20120205165535.jpg/)
testing
(http://img822.imageshack.us/img822/5694/20120205173124.jpg) (http://imageshack.us/photo/my-images/822/20120205173124.jpg/)
and welding
(http://img189.imageshack.us/img189/4950/20120205201904.jpg) (http://imageshack.us/photo/my-images/189/20120205201904.jpg/)
-
not much done
little more from engine
(http://img210.imageshack.us/img210/4158/20120221151550.jpg) (http://imageshack.us/photo/my-images/210/20120221151550.jpg/)
nothing from bodywork
its winter and there was cold
hope that in this weekend there is time to make some progress with car
helpful garage made the kingpin renewal - now there is only little welding, paint, undercoat and assemble front axle and steering.
-
piece by piece
front end - under body welding is done
coated with Dinitrol ML
assembled steering with new rods/ends
new brake bads and sylinders
(http://img406.imageshack.us/img406/6236/20120223083615.jpg) (http://imageshack.us/photo/my-images/406/20120223083615.jpg/)
(http://img535.imageshack.us/img535/5415/20120223180648.jpg) (http://imageshack.us/photo/my-images/535/20120223180648.jpg/)
(http://img210.imageshack.us/img210/606/20120224181406.jpg) (http://imageshack.us/photo/my-images/210/20120224181406.jpg/)
-
Get a lot of that undercoating and underseal stuff on to it as you wouldn't want rust coming through soon after so much work :thumbup
-
some news in pictures
(http://img138.imageshack.us/img138/3841/20120321135850.jpg) (http://imageshack.us/photo/my-images/138/20120321135850.jpg/)
(http://img718.imageshack.us/img718/382/20120321135914.jpg) (http://imageshack.us/photo/my-images/718/20120321135914.jpg/)
(http://img836.imageshack.us/img836/7572/20120322104937.jpg) (http://imageshack.us/photo/my-images/836/20120322104937.jpg/)
(http://img263.imageshack.us/img263/1808/20120321142210.jpg) (http://imageshack.us/photo/my-images/263/20120321142210.jpg/)
(http://img51.imageshack.us/img51/6180/20120321142220.jpg) (http://imageshack.us/photo/my-images/51/20120321142220.jpg/)
(http://img528.imageshack.us/img528/5938/20120322105028.jpg) (http://imageshack.us/photo/my-images/528/20120322105028.jpg/)
(http://img849.imageshack.us/img849/9885/20120322105036.jpg) (http://imageshack.us/photo/my-images/849/20120322105036.jpg/)
-
You are getting there step by step... ;)
-
Amazing! It is all coming together! It will look better than when the car was new! I wish I had the skill, your patience and perserverance!!
-
i dont have skills i make what i think is right and what i can do - is it right or wrong we will see
i know that next car will be made different ways.
but some new pics too
(http://img821.imageshack.us/img821/8750/20120328083053.jpg) (http://imageshack.us/photo/my-images/821/20120328083053.jpg/)
(http://img580.imageshack.us/img580/6184/20120328083119.jpg) (http://imageshack.us/photo/my-images/580/20120328083119.jpg/)
(http://img824.imageshack.us/img824/4685/20120328084413.jpg) (http://imageshack.us/photo/my-images/824/20120328084413.jpg/)
(http://img192.imageshack.us/img192/7688/20120328084341.jpg) (http://imageshack.us/photo/my-images/192/20120328084341.jpg/)
-
nice to see the floor finished. Good work :D
-
cleaned the gearbox and changed all gaskets in it
(http://img534.imageshack.us/img534/9103/20120329142233.jpg) (http://imageshack.us/photo/my-images/534/20120329142233.jpg/)
(http://img7.imageshack.us/img7/536/20120329142245.jpg) (http://imageshack.us/photo/my-images/7/20120329142245.jpg/)
-
I´m back ;D
OK there was some time when i didnt even look my fiat
because my attention was finish my teardrop trailer :P
and after small trip from Estonia to Slovakkia and visit Martin´s place 126fan.sk
(https://lh5.googleusercontent.com/-2caa3yXVEdw/UgCzy0W9ScI/AAAAAAAAB7A/Rkfa_9e8ijw/s640/IMG_8972.JPG)
(https://lh3.googleusercontent.com/-0AHDkkNdAbg/UgCz7X4dXNI/AAAAAAAAB7M/wRhPeAN2PPU/s640/IMG_8989.JPG)
(https://lh5.googleusercontent.com/-vTWoLs4_9qs/UgCz-vHG02I/AAAAAAAAB7U/o9CAHPBzJHg/s640/IMG_8999.JPG)
there is no option that i have to finish my 126 too
so i went to garage after year or so :$
and there she was
(https://lh5.googleusercontent.com/-_p-AjDcaWpE/UftWyWkkkfI/AAAAAAAABmQ/4dtr0b_ZSyY/s640/%255BUNSET%255D.jpg)
steering wheel was growing but nothing else
(https://lh5.googleusercontent.com/-g3xQW6q9AHM/UftW2lCrA0I/AAAAAAAABmY/0WicZSW9vR0/s640/20130801_134450.jpg)
after some struggle - we got her on trailer
(https://lh3.googleusercontent.com/-FIHbUvXHkJ0/UftXCMbz-kI/AAAAAAAABmg/SZ6DTMDjQo0/s640/20130801_150742.jpg)
hope that after some short time like month or two i can drive again 8)
-
Hey!!, back on the job! You've done some amazing work so far! :thumbup
-
little welding job
(https://lh3.googleusercontent.com/-3J5aFqlmRTk/Uiy5jkXsa9I/AAAAAAAACAQ/UaJ0RBK4Lk0/s640/%255BUNSET%255D.jpg)
(https://lh4.googleusercontent.com/-dBpOTLLp1ZI/Uiy5q0EQAGI/AAAAAAAACAg/AmkWodD-aTc/s640/%255BUNSET%255D.jpg)
(https://lh4.googleusercontent.com/-aTS7p9qgJKU/Uiy5npf9aeI/AAAAAAAACAY/4Qu-6U0N2lI/s640/%255BUNSET%255D.jpg)
(https://lh6.googleusercontent.com/-WSVzux-4ZRU/Uiy5s3FaeSI/AAAAAAAACAo/3NeZw2F4tFc/s640/%255BUNSET%255D.jpg)
cutouts
(https://lh4.googleusercontent.com/-2RnOxRNRoPc/Uiy5wRdyX6I/AAAAAAAACAw/q5yWUe7FD8w/s640/%255BUNSET%255D.jpg)
and after grinding
(https://lh3.googleusercontent.com/-8oLoLW0op50/Uiy595Z_97I/AAAAAAAACBw/TV6yJlr0H5s/s640/%255BUNSET%255D.jpg)
(https://lh4.googleusercontent.com/-ZEsQNPFStYk/Uiy58FJfbeI/AAAAAAAACBo/RQ2bA9JTfxY/s640/%255BUNSET%255D.jpg)
(https://lh4.googleusercontent.com/-OrFni4lV7Eg/Uiy56HKnCxI/AAAAAAAACBg/x6s1Hng1sS8/s640/%255BUNSET%255D.jpg)
(https://lh5.googleusercontent.com/-sERzRE9G5G8/Uiy51uam0mI/AAAAAAAACBI/ii1Qk02AIqA/s640/%255BUNSET%255D.jpg)
-
Some great work there! I have a rusting spot at the bottom of my windscreen too :(
-
i think most of them have those "spots" or holes like i had.
only need to order this
http://www.126fan.sk/eshop/index.php?main_page=product_info&cPath=20&products_id=215
and make some cut&weld :P