Club126UK
Fiat 126 Chat => Fiat 126 Chat => Topic started by: taz24v on November 04, 2011, 05:03:39 AM
-
my 82 air cooled?
thanks
http://www.ebay.co.uk/itm/300615458378?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
-
:cry:
-
They look like they should, but being aftermarket you could do with asking the seller the PCD and the center bore, just to be sure. PCD should be 4x98, and I *think* the centre bore is 58.1mm.
-
Seems a bit strange having Japanese wheels that will fit a Fiat but if they were fitted to a 600 then I would guess they would fit a 126 but it might have been a "wobble bolt" fixing. Also if you see the guys revision on rim width 3.5J is Fiat 500 size and 0.5 inches narrower that a standard 126 rim :$
-
Many thanks for your help. I'll give them a miss & wait for something else to come up.
-
These wheels are from a SEAT, cant remember the model name. Pretty sure the PCD would be the same, not sure about offset, rim width and centre bore though. The 3.5 seems very skinny for an alloy rim. As Rusty said if they came off a 600 then they should fit. You could always ask for photos of them fitted to the 600! ;)
-
SEAT Marbella maybe? Based on the old Panda?
-
well they fit but still not sure what they are, any idea's?
(http://i40.photobucket.com/albums/e234/samuellister/1-2.jpg)
(http://i40.photobucket.com/albums/e234/samuellister/2-1.jpg)
(http://i40.photobucket.com/albums/e234/samuellister/3-1.jpg)
(http://i40.photobucket.com/albums/e234/samuellister/4.jpg)
-
Well thats got me stumped :o I dont know of any japanese cars with a 98 pcd, so they well may be a 100 pcd. But I could be wrong again. :$
-
Sorry to crash a thread again! But these are the correct fitment for the 126 BIS are they?
http://www.ebay.co.uk/itm/FIAT-OE-STEEL-WHEEL-RIM-SET-4-NEW-13-4X98-ET35-SEICENTO-PUNTO-PANDA-UNO-/260891411715?pt=UK_CarParts_Acc_Wheels_tyres_Trims_Car_Rims_ET&hash=item3cbe570503
I want a new set like this, not sure they'll arrive safe from Poland though, what do you think?
-
They look like standard Panda (new) steelies to me (ET35 is too big to be Seicento), they'll fit a BIS no bother and I dare say you'd get them cheaper from a scrapyard in the UK.
-
They look like standard Panda (new) steelies to me (ET35 is too big to be Seicento), they'll fit a BIS no bother and I dare say you'd get them cheaper from a scrapyard in the UK.
New pandas aren't 12". Also 3.5 j's are thinner than a Fiat 500, never seen them before, very unusual!!
-
They look like standard Panda (new) steelies to me (ET35 is too big to be Seicento), they'll fit a BIS no bother and I dare say you'd get them cheaper from a scrapyard in the UK.
New pandas aren't 12". Also 3.5 j's are thinner than a Fiat 500, never seen them before, very unusual!!
I was replying to DraigFlag, rather than the OP ;)
-
Should have paid more attention!!
I have a set of mk1 punto wheels. They look identical.
I got mine for £35 with a good set of tyres on them. Paint is nowhere near as good, but I can sort that out myself.
Thing I've found with steel wheels is when you need a set, you can easily pay too much, but if you can wait until someone needs rid of a set, then the price will be much better.
-
I've been looking for over a year for any kind of set, i'm not even fussy, just anything better than those plastic hub caps! Ideally though, something in perfect condition to match the rest of the car, that's why i thought those steelies would be ok. But yea, they are too dear
-
I've been looking for over a year for any kind of set, i'm not even fussy, just anything better than those plastic hub caps! Ideally though, something in perfect condition to match the rest of the car, that's why i thought those steelies would be ok. But yea, they are too dear
Get a cheap set of Cinq/Sei alloys or steelies for now, take the plastic caps off of your original steelies and get them chromed and polished :)
-
Sorry to crash a thread again! But these are the correct fitment for the 126 BIS are they?
http://www.ebay.co.uk/itm/FIAT-OE-STEEL-WHEEL-RIM-SET-4-NEW-13-4X98-ET35-SEICENTO-PUNTO-PANDA-UNO-/260891411715?pt=UK_CarParts_Acc_Wheels_tyres_Trims_Car_Rims_ET&hash=item3cbe570503
I want a new set like this, not sure they'll arrive safe from Poland though, what do you think?
Is £79 too expensive? Where else could you get a cheaper set band new?
-
I was thinking that too. I'm just a bit sceptical as to whether they would arrive at all, and if they did, what kind of shape would they be in...
-
Yes! Didn't notice they were from Poland till after I posted!
-
Well i've put a bid in for those Steelies from Poland! Wish me luck! ???
-
the wheels are Subaru, came off a Rex :)
-
Subaru Rex, nice name!
Oh i bought those steel wheels from Poland. They are nice, brilliant quality, they have FIAT LANCIA stamped on the outside so they match the BIS engine :) They have a bit of primer on them but i think i'm going to spray them Silver.