Club126UK
Fiat 126 Chat => Fiat 126 Chat => Topic started by: Android 360 on January 15, 2006, 07:16:01 AM
-
the guy just brought the car around for me to see.
got some rust in the bottom of the nose cose other than that its pretty straight, engine runs allright etc, not as slow as i expected.
very small, fun for me as i am almost 6' 2".
the gears are funny, but i will get used to them, becuse they are a linkage system they arent as direct as im used to..
i've put a bid on it for $951 and it ends in a few hours.
Can't wait :)
-
GOOD LUCK :D
-
yeah i think ill need a bit of luck getting used to it haha
hey if i got a new gear linkage would it make the gear positions more defined? im thinking that maybe the linkage in there is worn which would explain why the gears are somewhat difficult to locate..
-
hi android
it's worth checking the rubber linkage connection for wear also the bolts sometime come loose!
(http://www.freepgs.com/fiat126clubuk/photos/gboxlinkthumbs.jpg)
-
superb diagram Chris!
might be worth us all checking the gear box's, my gear box has a small rattle, but i think its a chracteristic, it comes from below the gear stick, the gear sticks are quite long, so probably all move around a little.
welcome to the forum Android.
regards
Chris
-
Hello chap's the gear change is like a wooden spoon in a bowl of porridge (to the novice) :lol: but when you get used to it it's quite slick(well I think so)
-
its 100% better tnan a pandas! also reckon its better than a lot of modern fwd cars too.
-
haha maybe a european fwd..
wooden spoon in a bowl of porridge sounds quite like it! ok, when i take delivery i will get underneath, check the rubbers and make sure everything is tight.
cheers for the diagram!!
-
hi Paul, your right in a sense, i find the gears more fun than in a modern car, you have to think about what your doing!!
hope your well m8
Barry, panda gears arnt as good?
-
panda gearbox is dreadful, i honestly think the 126 box is easy and pleasant to use, never found it awkward on any ive driven.
-
quite shocked at that, the latter models have a 5th gear or did they all?
is the panda generaly not as nice to drive? or the contrary?
regards
Chris
-
my panda is a 5 speed box, its really notchy and vague, as they all seem to be... generally I much prefer the 126 to drive, the Panda is not as solid feeling, doesnt hold the road as well, is noisier but obviously more spacious.. but.. I love them for that, very basic and really fun.
-
ok i took delivery this arvo so ive had a proper look.., its basically impossible to get this thing in reverse!
correct me if i am wrong, but there is a small metal bracket to the right that should stop you going in reverse unless you push down on the gearstick.
when i push down the stick and put it in its right-most position i always get fourth!
i am thinking that maybe an engine mount has sagged therefore putting the whole thing on an angle which makes the gear stick hit the bracket before it can get across enough to reverse..
the linkage and everything seems ok..
maybe i just need to chop off the bracket and be careful not to go in reverse :p
-
Right there fella,don't panic,check the two mount's at the gearbox (rectangular block's) they could be bust,or the rubber mount on the rod (as illustrsted earlier) these can become dosed with oil contamination.This might sound mad but if you send me a private message I'll send you my number and you can give me a buzz :D
-
ive taken a look and the two mounts and the rubber on the linkage seem fine!
the engine does move around when u change gears tho, so maybe they have just gotten too soft?
the engine should have side mounts instead of just the one on the front i reckon.. oh well..
-
The wee engine is mounted on a spring at the front so it will bounce round like a banshee :lol:
-
thats insane!
can you tighten down the spring somhow so it doesnt bounce as much, i think that my problem may be due to the engine moving too much..
ive bought new rubbers etc too, we'll see how those go
-
hi my air cooled had a problem with going in reverse also.just underneath the gear stick under the carpet are 2 bolts you can ajust it backwards or forwards.i pulled mine backwards slightly to allow it to go in reverse easier.this did the job,just remember that even the slightest ajustment makes a big deal.hope this helps
-
hi,try this,on that rubber link that joins the remote linkage to the gear box.
the bolts are shouldered,and can wear,(that leaves the nut tight against the shouldr and not tight against the rubber thingy!)so even tho they are tight, when you try for reverse by twisting the shift rod,(as you move your shifter to the right)the gear box end wont move as it should,(have a look while someone trys for reverse,had this prob on my bis,could'nt get reverse at all.
take them out and replace,or fit a small washer in to take up the slack.
hope its as simple as that for you mate. :cool:
-
hey guys.. ok taken another look tonight..
the linkage seems fine, the rubber is a bit spongy but doesnt seem to be flexing all that much..
ive tried the forward and back adjust ment but it makes no dif..
heres a pic:
(http://img7.imageshack.us/img7/6480/pic042622gk.th.jpg) (http://img7.imageshack.us/my.php?image=pic042622gk.jpg)
that is in fourth gear, see how its right up against that bracket? it cant go into reverse because of that.. so is there any sort of sideways adjustment?? i cant see to find any..
cheers
-
mmmmnnnn....Hi,it still looks just like my bis shifter problem,are you sure there is really no movement at those little bolts?,it doesnt need much to defeat reverse selection.....its worth taking them out and replacing with normal nut and bolts or shimming them so the rubber thingy is really clamped to the shift rods........
reverse is selected by twisting,so moving the gearshift back and forth wont do much,we tried that before finding the VERY small amount of play in those bolts.
good luck!
-
ok, on saturday i will pull it apart and have a play..
ill let u no how it goes
-
If there is not enough sideways movement, it may be that something's been bent (someone leaning hard on the gearstick?)
If any gears are jumping out or hard to locate here's advice I got from the late Brian Rylance and it worked a treat for me:
Slacken the bolt at the gearstick end of the flexible link
Put into reverse gear (as best you can)
Now remove the slack bolt altogether and push the gearbox control rod as far as it will go into the gearbox so that reverse gear is properly selected
Slacken the gearstick screws next to the seat and, holding the gear stick in reverse gear, knock the screws until the gearstick rod lines up with the linakage correctly.
Tighten the gearstick screws back up, double check alignment again and then refit bolt into linkage. Hopefully all gears will now slect and hold. If they still jump out its probably wear in the gearbox.
If the gearstick rod and linkage won't line up then double check the gearbox mounts. If they are okay, it points to either the central tunnel being out of place (unlikely) or the rear crossmember of the car is bent, pushing the gearbox forward or back Straightening accurately may be awkard and it might be easier to lengthen the slots for the gearstick screws to give more scope for adjustment.
Hope this helps
-
this is interesting, look between the gearbox and the crossmember, there are chopped up tyres or something held there with zip ties, the gearbox is lying on em..
(http://img55.imageshack.us/img55/5044/pic042674xj.th.jpg) (http://img55.imageshack.us/my.php?image=pic042674xj.jpg)
(http://img55.imageshack.us/img55/5056/pic042680md.th.jpg) (http://img55.imageshack.us/my.php?image=pic042680md.jpg)
(http://img55.imageshack.us/img55/3491/pic042692xn.th.jpg) (http://img55.imageshack.us/my.php?image=pic042692xn.jpg)
ive just taken apart the front too and seen why there are so many cracksin the front paint, someones cut some steel out of the front, siliconed some galvo steel on the back then bogged over.. maybe they ran into the back of someone and their towball went thru the front or something? its pretty bad tho..
-
Ok fella,let's start from the beginning change the two rubber block's at the gearbox then,disconnect the linkage at the box and select reverse at the gearbox if that work's then work your way back toward the gear lever.Hope this help's a bit :D .
-
It looks quite negelcted. The gearbox mounts cost very little so a bodger has had the car. Front panels are widely available and often replaced on 126s - so don't worry too much about that. I'd give the car a total 'service' as you don't know what else has been bodged or neglected. The state of the king pins and bearings are often a good indication of the how well the car has been cared for. Obviously, check the brakes have linings etc before tearing around too much.
-
so the rubbers under the box are the actual mounts?
-
They are indeed if they go it cause's all sort's of trouble including gear selection. :roll: