Club126UK

Fiat 126 Chat => Tuning & Customising 126 Models => Topic started by: smallcox on July 21, 2011, 09:28:18 PM

Title: Tune up on dyno
Post by: smallcox on July 21, 2011, 09:28:18 PM
Hi Gang,

Just booked the little yellow peril in for a tune up on a dyno for Thursay next week, just a little worried about blowing the engine. I will try to video it if posible and let you know how many ponies its running over, I mean putting out :-
Title: Re: Tune up on dyno
Post by: Kipster on July 22, 2011, 06:16:38 AM
Fingers crossed for your crankshaft  ;D.
Title: Re: Tune up on dyno
Post by: eben80 on July 22, 2011, 08:11:27 AM
Hi Gang,

Just booked the little yellow peril in for a tune up on a dyno for Thursay next week, just a little worried about blowing the engine. I will try to video it if posible and let you know how many ponies its running over, I mean putting out :-

Yes please  :D
Title: Re: Tune up on dyno
Post by: 1973/126 on July 22, 2011, 12:42:09 PM
 Exciting. Would be interesting to know how much hp the little beast is putting out.
 Perhaps we should have a guess. ;D
Title: Re: Tune up on dyno
Post by: dajwid on July 22, 2011, 12:59:44 PM
Fifty one.
Title: Re: Tune up on dyno
Post by: 1973/126 on July 22, 2011, 04:31:58 PM
  My guess is 47.5
Title: Re: Tune up on dyno
Post by: Eklipze3k on July 22, 2011, 04:45:51 PM
I'll be optomistic and say 63 :)
Title: Re: Tune up on dyno
Post by: GTMaster on July 22, 2011, 09:21:34 PM
How about 80hp  :)
Title: Re: Tune up on dyno
Post by: thepuddlejumper on July 23, 2011, 12:41:45 AM
Hi I think with all the mods 55bhp
Title: Re: Tune up on dyno
Post by: smallcox on July 28, 2011, 05:41:14 PM
OK,

So got up early and headed down to the dyno shop, after tea the car was straped down (I quess they think it will blow away in the breaze).

1st run was way to lean so was aborted for a richer needle.
Then on the 2nd run it was ignition time as this was way to advanced so i was told. The ignition was plotted out at different revs, and then a power run to 5000rpm happened. I told the operator Allen not to take it over 5500 as we all know what happens.

A couple off surprises was found by all myself and Allen, as the power the car was putting out did not seem correct so tyre size and calculations checked, double checked and trippled checked and was advised to carry a box for when it goes bang.

Now I see you all had a quess from 47.5 to 80bhp (80 was you serious), but are you talking wheel bhp or flywheel bhp as standard 24bhp was at the engine about 18bhp at the wheels?

By the way the boost was set at 15psi to keep the engine from bending another crank before, "she's moaning ill come back to this"
Title: Re: Tune up on dyno
Post by: smallcox on July 28, 2011, 05:58:49 PM
Back to the dyno,

Ok Guys who want's a second quess and quote either flywheel or at the driven wheels so theres no cheating,        Ps standard 650cc is about 18bhp at the back wheels :D
Title: Re: Tune up on dyno
Post by: Rusty's Uncle on July 28, 2011, 06:08:43 PM
You little teaser you , what are you like. You will have us texting a premium rate number to get the result  :P
But as I understand it you have not got all of the wicks turned up yet so this is just an interim finding. So I reckon 58 at the flywheel  :D
Title: Re: Tune up on dyno
Post by: smallcox on July 28, 2011, 06:18:41 PM
Hay Rusty, the winner gets a big kiss from me :P
Title: Re: Tune up on dyno
Post by: 1973/126 on July 28, 2011, 06:45:18 PM
 Now I`m not sure if I want to get this right... :P
 I know the 126 Fan guys are running a pretty tuned up engine with panda head, twin choke twin port, etc.. and they got 38.5 PS on the flywheel and 23.6 PS on the wheels.
 Not sure what the cc of your engine + you've got a supercharger and a turbo, sooo
 I guess it`s gonna be round the 50 mark on the flywheel, but I stick with my first guess.
 Come on man tel us what it was.
Title: Re: Tune up on dyno
Post by: smallcox on July 28, 2011, 07:12:00 PM
Ok I'll tell all.

the bhp at the wheels was.............28 no, 38 no, ....................... ;)
Title: Re: Tune up on dyno
Post by: 1973/126 on July 28, 2011, 07:24:14 PM
 :o
 Whaaaat???

 
Title: Re: Tune up on dyno
Post by: GTMaster on July 28, 2011, 08:03:29 PM
60hp at the flywheel  :D (in the land of Gran Turismo 80hp is achievable :)  ;D )
The way i know it is the power loss through the drivetrain and wheels is about 10-15%?
Title: Re: Tune up on dyno
Post by: smallcox on July 28, 2011, 08:40:25 PM
OK, I'am sorry.

the little engine was putting out 80bhp at 5500rpm with 70lb of torque registering from 3500rpm from the wheels, quite a wide power band. This is approx 96 at the flywheel 8)
Title: Re: Tune up on dyno
Post by: 1973/126 on July 28, 2011, 08:51:09 PM
 I`m shocked. This is crazy man.
 Well done to you for all the hard work put in to the car. :thumbup :thumbup :thumbup
Title: Re: Tune up on dyno
Post by: Rusty's Uncle on July 28, 2011, 09:22:22 PM
Outstanding man and well done for a work of art and performance  ;D
No kisses for me then  :$
When you have the time you should write a potted history of the car as I think that it is a great story so far and I believe that there are a few more chapters to come  :)
Title: Re: Tune up on dyno
Post by: smallcox on July 28, 2011, 09:53:18 PM
Thanks all for the ongoing support and hope to see those who are attending Retro rides ;)
Title: Re: Tune up on dyno
Post by: nrg19uk on July 28, 2011, 09:55:20 PM
Wow  ;D that is some massive figures!!!
Title: Re: Tune up on dyno
Post by: landyman on July 28, 2011, 10:13:40 PM
hi well done need a bigger body shell now ? hero status and larger head wont fit standard 126 :D how do you feel about selling tuned engines for us normal muppets !!! pm me a price. great to see a 2cyl engine bolted in the back of these babys. have considered the 40bhp kit from nanni ricambi but can't make mind up :thumbup
Title: Re: Tune up on dyno
Post by: 1973/126 on July 29, 2011, 08:04:36 AM
 He`s got a fold back sun roof, so will be alright with the big head :P
Title: Re: Tune up on dyno
Post by: Darrell on July 29, 2011, 09:12:03 AM
Proper job
Title: Re: Tune up on dyno
Post by: DEYAN IYI on July 29, 2011, 11:51:49 AM
140hp per liter !?!?!  :o

Tell us it's still a joke! Please... :$

Well done!!!
Title: Re: Tune up on dyno
Post by: hudsonhenry on July 29, 2011, 11:52:24 AM
Amazing power form the twin, an excellent result, what are your plans with the gearbox to help it cope with that sort of power?

Nigel
Title: Re: Tune up on dyno
Post by: nrg19uk on July 29, 2011, 08:03:29 PM
The new fiat 500 twin air 900cc only produces 85 bhp@ 5500rpm and 107lbft @ 1900rpm. ???
Title: Re: Tune up on dyno
Post by: Kipster on July 29, 2011, 09:00:42 PM
 8) 8) 8)
A feat of your own engineering.
Title: Re: Tune up on dyno
Post by: GTMaster on July 29, 2011, 09:25:32 PM
 :thumbup
Title: Re: Tune up on dyno
Post by: smallcox on July 30, 2011, 08:44:36 PM
 GT Master you get the kiss, but ill have to post it to you :$

114 bhp per litre when I worked it out, but this power was limited due to crankshaft failure. I quess with time power kits will be avalible for the twin air to get more power as you mentioned.

I was surprised myself and so was the operator off the dyno, as he quoted "turbos seem to like 2 cylinders". As for the gearbox, at present I drive it with respect. ie no wheel spinning.

I still have to build a distributor advance curve that is needed, so that hopefully will happen next week.

Again, thats for the kind word from all, and yes my head was big on the way home from the power session.
Title: Re: Tune up on dyno
Post by: Amateb8 on July 30, 2011, 09:53:44 PM
I'm speechless. Well done. I have not seen anyone do to their 126 what you have done to yours. I said previously at the RR last year that what you have done was an amazing engineering feat but you have gone a couple of notches further. I very much look forward to see you and the yellow peril at the RR.
Title: Re: Tune up on dyno
Post by: dajwid on July 31, 2011, 10:18:37 AM
Blimey!!!  Well done.

When will these upgrade kits be available? :D
Title: Re: Tune up on dyno
Post by: KAL SPL on July 31, 2011, 11:41:00 AM
Do you have a build thread for this car , I looked but couldnt find anything ?
Title: Re: Tune up on dyno
Post by: thepuddlejumper on July 31, 2011, 12:30:59 PM
Wow, phenominal power from an aircooled twin.  I thought of going down the vw 1600cc route for more power but shied off when I found out about the machining I would have to do to get it to work.  An amazing feat of engineering.  Hats off :o :o

Ralph
Title: Re: Tune up on dyno
Post by: smallcox on July 31, 2011, 08:58:28 PM
Sorry KAD SPL,

I buildl't this car long before I new this club excisted, :$
Title: Re: Tune up on dyno
Post by: Amateb8 on July 31, 2011, 09:53:56 PM
Your car should be featured in Auto Italia magazine or something.
Title: Re: Tune up on dyno
Post by: Draigflag on August 01, 2011, 08:05:08 PM
Good figures there, well done. Who did the custom bodywork? It looks mean! You have a similar BHP per litre to my Abarth 500, and that's a new car with modern turbo etc!