Club126UK
For Sale & Wanted => Wanted: => Topic started by: dread on June 14, 2011, 11:32:14 PM
-
hi guys well hope some one can help me out, or point me in the direction of parts i need.
haynes manual calls them
blind bush
friction washers x2
spring
washer
and circlip
its all the small parts that hold your rear shoes onto the carrier pins
i am biulding a trike (took over a part done one). and have today discovered that all but the slaves shoes and long springs are missing :cry:
any help in getting these bits be it second hand or new, would be great. cheers all.
oh i need both sides by the way. and not too sure about the hand brake mechanism the plates are there ,but nothing else... ::)
-
The last set of locating springs, pins and washers I bought from Halfords.
Ralph
-
really, well i have one near by, so well worth a shot then. i shall report back. thanks.
-
It might depend upon the age of your 126 as on later ones, some of the rear brake components- drums, shoes cylinders etc are common / same as on 128, uno/yugo & early punto, panda? perhaps other too.
Should be able to find a wrecker somewhere ?
-
right i bought some shoes off ebay and the seller says they have the bits with them.
but i still need to locate the handbrake parts that are in the hub and backing plate. as well as a pair of flexi hoses.
i have rang my breakers yards near to me. narda!
flexi's i can get in ebay i know. but even the ones being broken on ebay will /are not interested in selling me the handbrake bits.
:(
-
Hi its Jack off ebay, still have the bits you need, will try my best to remove them tommorow!
-
hello bud, hoaky doaky ...
remember brake lines from master to rear of slaves and the handbrake parts, cheers. 8)
-
still needing these HAND BRAKE INNER HUB PARTS PLEASE, so bumperety bump people.