Club126UK

Fiat 126 Chat => Tuning & Customising 126 Models => Topic started by: thepuddlejumper on April 16, 2011, 12:49:31 AM

Title: 126 turbo kit
Post by: thepuddlejumper on April 16, 2011, 12:49:31 AM
Anyone seen the 126 turbo kits seems awfully cheap

 http://stores.ebay.co.uk/E-Sales-Race-Distribution/Turbocharger-Kits-/_i.html?_nkw=fiat+126&submit=Search&_fsub=8442110&_sid=366108297


Ralph
Title: Re: 126 turbo kit
Post by: AlleyNiki on April 16, 2011, 06:37:25 PM
It says you still need the oil lines and blow off valve. Sold seperately, apparently.

Wouldn't the little engine you know, shake to bits? I was thinking you might need a special head for this.

Alastair
Title: Re: 126 turbo kit
Post by: smallcox on April 16, 2011, 06:42:42 PM
You all know me and if turbo charging is your thing don't buy this junk. these are an asortment off ? that will not bolt straight onto your car. the turbos are dated by todays standards and all that other stuff you will not need. They should rename them junk kits
Title: Re: 126 turbo kit
Post by: thepuddlejumper on April 16, 2011, 08:43:03 PM
Thanks for the insight, I thought it was to good to be true. Even by american prices it was cheap.  I am looking into converting the engine to 800cc via vw liners and pistons and thought adding a turbo to boost it even more.  So just gathering info at the moment. I will start with the 800 conversion first.

Ralph
Title: Re: 126 turbo kit
Post by: AlleyNiki on April 17, 2011, 05:36:08 AM
I've seen exactly the same kit marketted for other cars..

Are there any out there tailor made for the 126?
Title: Re: 126 turbo kit
Post by: smallcox on April 20, 2011, 01:36:39 PM
I don't believe so, But I have a shopping list off what you my need if considering it.

You would need to have parts made but if your half handy
 with a welder there not to difficult to do.

I sourced most off my parts second hand and the first time round cost just under £150 notes to do but that was making manifold and exhaust myself :cry:
Title: Re: 126 turbo kit
Post by: thepuddlejumper on April 21, 2011, 12:09:17 AM
A shopping list would be good for me as I am a novice at this turbo thing.  I am proficient at welding and have access to a turning laith.

Ralph