Club126UK
Fiat 126 Chat => Tuning & Customising 126 Models => Topic started by: t66 on March 22, 2011, 04:51:32 PM
-
My little project is creeping along well, thought I would share it here. While not a purist 126 , I chose the 126 as a base for my car as I love the Italian autoslalom cars.
Power comes from a supercharged Honda Blackbird engine.
Ps Who is best supplier in the UK of 126 lights/headlights etc ? I also have various 1974 aircooled parts for sale. Engine/Interior etc if anyone is interested. All available soon.
(http://i582.photobucket.com/albums/ss270/T66bucket/_1258055529207.png)
(http://i582.photobucket.com/albums/ss270/T66bucket/25102010673.jpg)
(http://i582.photobucket.com/albums/ss270/T66bucket/25102010667.jpg)
(http://i582.photobucket.com/albums/ss270/T66bucket/2010_11250007-1.jpg)
(http://i582.photobucket.com/albums/ss270/T66bucket/2011_01140009.jpg)
(http://i582.photobucket.com/albums/ss270/T66bucket/2011_01140006.jpg)
(http://i582.photobucket.com/albums/ss270/T66bucket/2011_02250013.jpg)
(http://i582.photobucket.com/albums/ss270/T66bucket/2011_02250007.jpg)
(http://i582.photobucket.com/albums/ss270/T66bucket/2011_02250018.jpg)
-
I have a set of brand new ones or a used set in fairly good condition.
PM me if interested.
Note RHD lights are hard to find, LHD fairly easy (you can carefully remove sealed units and change though, if you have good RHD lenses)
-
Hi
dont often get onto this site, thanks for the lights offer but it appears I had a good set already.
The engine & gearbox are now sold - but I do have
1) Front and rear seats in black vinyl - bit dusty but will clean up well
2) Black bakelite steering wheel & horn push
3) Dark red seatbelt kit - fixed Britax type (no rips or fraying but need a clean)
4) Distributor - 1974 aircooled
5) Speedo cable
6) Gearstick & linkage complete
7) Heater cables & lever controls
8) Bis - Bootlid in light blue, good nick.
9) Heater vent & channeling
10) Pair of BIS front wings
11) Speedometer & cowling
12) Various trim items
13) Voltage regulator
I have no doubt there is more, I just cannot remember. All for sale please to reasonable and sensible offers.
Some parts in Northumberland & some in Leicestershire.
email [email protected] please - I have missed a few messages here.
Thanks
Ivan
-
That is mental !
Please keep the updates coming.
-
Hi I like the suicide doors, what hinges did you use did you modify the oiginals?
Ralph
-
An amazingly simple solution to the doors not opening over the wide sill, hats off to Retropower who resolved it....
The hinge panel from the leading edge of the os door was cut out, along with its linkage & handle, and likewise so was the ns hinge set.
Then the os hinge set was welded into the rear of the ns door and vice versa, the door handles moved to the leading edge with their respective linkage still operative.
Failing that gullwings were a possibility, but Im not really a fan of them. The suicide doors are far more retro and in keeping with the Fiat badging.
Car will be finished in white, and have some discrete Abarth badging - eventualy ! but thats a long way off.
-
Love it that is very cool carnt wait to see it finished
-
Thanks for that - The car is still with retropower, and I just need to find the time to collect it, My garage has been empty too long....
-
have you still got original steel wheels and if so how much?
bob
077 333 53 117
-
would be interested in purchasing seat belts and stalks with bolts if still available 07952906759 thankyou tim
-
Ivan
Many many thanks for the interior, fantastic condition. Came up perfect.
(http://i673.photobucket.com/albums/vv95/fronty4sale/DSC05108-1.jpg)
Suprised whoever won it on Ebay gave you hassle. Idiot, sadly Ebay is full of them.
As you said the guys at Retro Power are a great bunch of guys, very friendly, I could have chatted and browsed all day :$
Your car looks fantastic, an amazing amount of work has gone into the car.
-
http://www.retropower.co.uk/projects_126_Blackbird.htm
Found this by chance.
-
Thats her.
-
#MonsterMouse is now home, and the DIY part of the build has begun. I dont build fast, but your welcome to follow on twitter, where I post up build pictures as Im going. - Search for #MonsterMouse
Biggest change since I last posted, is the rear axle which was replaced with a Quaife Powertec axle.
Got a ton of work to get on with, hope you like.
http://ivanskis-garage-blog.blogspot.co.uk/
(http://i582.photobucket.com/albums/ss270/T66bucket/038-1.jpg)
(http://i582.photobucket.com/albums/ss270/T66bucket/P1010001.jpg)
(http://i582.photobucket.com/albums/ss270/T66bucket/P1010049.jpg)
-
Pleased to see the build is still going on, car looked fantastic when I saw it. Good luck I will be following the build.
-
Nice build but don't get me wrong - you did this to a 1974 Fiat 126? :o
-
All parts were sold, The interior went to a very good home.
-
Will follow on Twitter
-
Looks awesome!
Quick question, what engine and box combo did you end up using? :P
-
TTS built Honda Blackbird Rotrex engine, dry sumped, balance shafts removed, JE pistons, dyno run at 330bhp.
Axle is a Quaife Powertec the same as a Radical SR3, mine actually came from a Darrian T9.
Has a reverse gear on it too, and a spare set of lower ratio gears too.
(http://i582.photobucket.com/albums/ss270/T66bucket/P1010001.jpg)
(http://i582.photobucket.com/albums/ss270/T66bucket/P1010010.jpg)
-
Dry sump tank bracketed & fitted. Chargecooler mounted on the chassis back legs.
Ps I have the old steering column from the car on Ebay if anyones interested.
(http://i582.photobucket.com/albums/ss270/T66bucket/c5a1e418.jpg)
(http://i582.photobucket.com/albums/ss270/T66bucket/76cc65ad.jpg)
-
330hp in what 500kg car ? GTFO :o
-
330hp in what 500kg car ? GTFO :o
It has a DTA ecu which I understand can run two maps, so I am rather hoping to have a max power setup and also a sensible one, if thats possible with this car. The original plan was to use a Hayabusa or ZX12 engine, then this very special Blackbird engine appeared. So what started as a bonkers project, took a twist I wasnt expecting. But I go with the flow....I will be happy with 600kg
Im messing on with cardboard mock up fuel tanks at the moment, looking for 25-30litres. Home grown alloy tank, positioned on the O/S/R of the car. Foam filled, baffled with internal swirl pot.
The exhaust manifold will be a stainless 2" system, 4-1 with cat, lambda sensor bung & egt probe. The silencer will lie horizontally across the back of the car, inside the cars floor line behind the lower edge of the bootlid. The related oil coolers will sit above that. Eventually the car will run with the lid open Abarth style on stay rods.
The engine bay is taking good shape, and I have an idea in my head where most of it is going to fit. The water methanol injection kit came with a big tank, so will need swapping for a smaller one.
(http://i582.photobucket.com/albums/ss270/T66bucket/b71f933d.jpg)
(http://i582.photobucket.com/albums/ss270/T66bucket/f3bb049f.jpg)
(http://i582.photobucket.com/albums/ss270/T66bucket/57530a51.jpg)
(http://i582.photobucket.com/albums/ss270/T66bucket/13c08371.jpg)
(http://i582.photobucket.com/albums/ss270/T66bucket/d3dd9d81.jpg)
-
Very nice... has anything progressed since 2012 I wonder... Thanks for the link Pete :D
-
same question here, i'm sure we are all intrested to se any results.
Mike
-
Very nice... has anything progressed since 2012 I wonder... Thanks for the link Pete :D
Send T66 a PM you don't no you might get an answer :D