Club126UK
Fiat 126 Chat => Tuning & Customising 126 Models => Topic started by: smallcox on February 23, 2011, 09:25:47 PM
-
Hi you guys,
Well I sucked up to the wife and did loads off chores round the house and put my foot down a bit :oops:
The loving dear let me lose with the credit card and I ordered a 5 speed conversion kit for the fiat on Monday.
Hell it only turned up today thats 2 days and am excited, will try to fit it Friday [-/
Smallcox :D
-
good luck with the fitting of the five speed :) let me know how it goes as i am ashamed to admit i didnt know they did them.
OnlyNome
-
Definitely the best modification you could make to a 126- have a Nanni 5 speed conversion on my 500 (with Niki gearbox) and it transformed the car- unfortunately I think I need to fit one to my Giardiniera... ::)
Where did you source yours from and how much are they now? ???
Would love to hear your thoughts once it is fitted!
-
Saw this conversion on Axel Gerstl :)... any way of knowing what the ratios are?
[-/ **-
-
Hi gents,
going to have ago at fitting the kit tommorow :oops:
Got the kit from Bacci Transmision, they seem to do ebery thing you can want and more for all types of cars including a 6 speed for 4700 euros.
The kit looks very well made, and the service is good as e-mail where up to date from Bacci, the only thing I am not happy with is the casting case seems a little "crap" the hole that the selector arm passes through is not machined very well so I will fit bronze bushes for longer life but then this is
not the most expensive kit out there ::)
The kit was 580euros plus vat so all in very expensive with postage but I let you do the maths(626 pounds) but ive always felt that the standard 4 speed at 70mph at 4000rpm+ was, well let the car down so with plenty off power and now with the bis diff I calculated that at 3000rpm the speed will be 68mph so cruising at motor way speeds off modern traffic lets say 80mph will be aprox 3530rpm [-/ not even breaking into a sweat.
I'll post some pictures as I go
-
Sounds good, I'm very interested to know how you get on as I was thinking along the same lines.
I spoke to Colotti in Italy who wanted 6,000 euros or their 5speed conversion and lsd which I thought was a bit over the top!! They did however recon it would take up to 130bhp.
As a cheaper alternative I was thinking Bacci kit cryogenically treated might be the way to go.
Nigel
-
On Friday gearbox out and new 5 speed in. Very easy to do, just a little jiggling around to sort small detail problems I encountered, but now done I recon give yourself a day to do this one if considering. 2 parts will require machining at a machine shop for most. Also machined the rear cover and fitted phosphor bronze bushes as was not happy with the finished tolorance supplied where the selector shaft passes through [-/
-
You must be very excited about this. Let us know how you get on once you took it out for a spin.
What else did you have to modify, apart from those bushes?
-
Will do,
There are little adjustments but i quess you would expect that with a bolt on kit like this.
The reverse/5th selector forks did not line up so when tightened the sliding action binded. The rear casting rubbed (just) on 5th gear so a little grinding away was needed, and noted that the gearbox is now longer by 37mm in lenght so the rubber bushed link will need shorterning. but all easy stuff [-/
can't wait to get out on open roads, I let you kow how it goes but that will not be for a few weeks
-
Few weeks? I bet you are upgrading your engine again. What is it going to be this time?
Have you ever had it on a rolling road? Would be interesting to know how much hp it`s pushing out.
Keep up the good work [-/
-
Engine and gearbox fitted today, had a little trouble fittting a turbo filter to the engine so 4 hours later the engine went straight in and hopfully on Friday I will fire it up :-
-
We're kind of impatient... :oops:
-
Calm down,
Went for a good run today and wow how did I drive the car with out it. It's that good. another mod needing was to cut a hole in the steel plate that runs from the rear floor pan to the gearbox suport frame as the new casting supplied is bigger.
Off to Santa Pod tommorow so may give it some on the M1,
60mph is 3000rpm in 5th with the bis diff, so 6000rpm =120mph :-
-
Wooooooooooooooooooooooooooooo!!!!
-
Is that actual speed? Or guesstimated? Would be nice if it was!
-
126 5 Speed Special [-/
-
How did you get on at Santa Pod!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-
Well to be honest I was a little worried about the 126 as this really was the first run in her this year :o but hey what can i say the little car purred along at modern motorway speed lovely in 5th all the way.
Meet up with friends at Santa Pod and camped over the weekend.
As you can see the car was getting all the ladies hot :o
Must say a thanks for the Passion crusiers for inviting us on there stand
In the background is my cuZ cosworth in yellow off course 8)
-
Just to come back to you about the 5 speed, yes that is actual speed as the rev counter fitted was calibrated, so 4000rpm is 80mph and being a law abiding person who would never ever speed on the public road the car cruised at 10+10+10+10+10+10+10+10+10mph and loved it ;D
Some more pic's
-
2000 rpm- 40mph
2500 rpm- 50 mph
3000 rpm- 60mph
3500 rpm- 70mph
4000 rpm- 80mph
4500 rpm- 90mph
5000 rpm- 100mph
5500 rpm- 110mph
6000 rpm- 120mph
:o :o :o :o :o
nice figures how much hp does this beast have? what does it rev too?
6500 rpm- 130mph ???
-
Yes those figure are correct, also remember biss diff fitted and over size wheels. The engine did rev to 6700 at retro rides but that lent to a bent crank, so modes are in progress on a new type crank :-X
If on a private road and not the public highway I bet with the standard crank 105mph easy, but would not push that crank for long at these level off bhp/rpm
-
1 last job,
had fun in the garage today sorting the selector so gears can be found without stirring the stick, coupled sprung loaded nylon buttons and dodgy welding and the gear stick now centres itself for 3rd and 4th gear :)